block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.
bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.
Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have to perform an active commit whenever the top node has a parent
that has taken the WRITE permission on it.
This means that block-commit's @backing-file parameter is no longer
allowed for such nodes, and that users will have to issue a
block-job-complete command. Neither should pose a problem in practice,
because this case was basically just broken until now.
(Since this commit already touches block-commit's documentation, it also
moves up the chunk explaining general block-commit behavior that for
some reason was situated under @backing-file.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
This includes some permission limiting (for example, we only need to
take the RESIZE permission if the base is smaller than the top).
Signed-off-by: Max Reitz <mreitz@redhat.com>
This includes some permission limiting (for example, we only need to
take the RESIZE permission for active commits where the base is smaller
than the top).
base_overlay is introduced so we can query bdrv_is_allocated_above() on
it - we cannot do that with base itself, because a filter's block_status
is the same as its child node, so if there are filters on base,
bdrv_is_allocated_above() on base would return information including
base.
Use this opportunity to rename qmp_drive_mirror()'s "source" BDS to
"target_backing_bs", because that is what it really refers to.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This allows us to differentiate between filters and nodes with COW
backing files: Filters cannot be used as overlays at all (for this
function).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Because of the (not so recent anymore) changes that make the stream job
independent of the base node and instead track the node above it, we
have to split that "bottom" node into two cases: The bottom COW node,
and the node directly above the base node (which may be an R/W filter
or the bottom COW node).
Signed-off-by: Max Reitz <mreitz@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous two commits did that for sufficiently simple
cases with Coccinelle. Do it for several more manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-37-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. The previous commit did that with a Coccinelle script I
consider fairly trustworthy. This commit uses the same script with
the matching of return taken out, i.e. we convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
}
to
if (!foo(..., errp)) {
...
...
}
This is unsound: @err could still be read between afterwards. I don't
know how to express "no read of @err without an intervening write" in
Coccinelle. Instead, I manually double-checked for uses of @err.
Suboptimal line breaks tweaked manually. qdev_realize() simplified
further to placate scripts/checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-36-armbru@redhat.com>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
Convert uses like
opts = qemu_opts_create(..., &err);
if (err) {
...
}
to
opts = qemu_opts_create(..., errp);
if (!opts) {
...
}
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Note that we can't drop parallels_open()'s error_propagate() here. We
continue to execute it even in the converted case. It's a no-op then:
local_err is null.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200707160613.848843-8-armbru@redhat.com>
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
Upcoming patches want to add some basic bitmap manipulation abilities
to qemu-img. But blockdev.o is too heavyweight to link into qemu-img
(among other things, it would drag in block jobs and transaction
support - qemu-img does offline manipulation, where atomicity is less
important because there are no concurrent modifications to compete
with), so it's time to split off the bare bones of what we will need
into a new file block/monitor/bitmap-qmp-cmds.o.
This is sufficient to expose 6 QMP commands for use by qemu-img (add,
remove, clear, enable, disable, merge), as well as move the three
helper functions touched in the previous patch. Regarding
MAINTAINERS, the new file is automatically part of block core, but
also makes sense as related to other dirty bitmap files.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-6-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The next patch will split blockdev.c, which will require accessing
some previously-static functions from more than one .c file. But part
of promoting a function to public is picking a naming scheme that does
not reek of exposing too many internals (two of the three functions
were named starting with 'do_'). To make future code motion easier,
perform the function rename and non-static promotion into its own
patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200513011648.166876-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The previous few commits have made this more obvious, and removed the
one exception. Time to clarify the documentation, and drop dead error
checking.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
All callers of job_txn_apply hold a single job's lock, but different
jobs within a transaction can have different contexts, thus we need to
lock each one individually before applying the callback function.
Similar to job_completed_txn_abort this also requires releasing the
caller's context before and reacquiring it after to avoid recursive
locks which might break AIO_WAIT_WHILE in the callback. This is safe, since
existing code would already have to take this into account, lest
job_completed_txn_abort might have broken.
This also brings to light a different issue: When a callback function in
job_txn_apply moves it's job to a different AIO context, callers will
try to release the wrong lock (now that we re-acquire the lock
correctly, previously it would just continue with the old lock, leaving
the job unlocked for the rest of the return path). Fix this by not caching
the job's context.
This is only necessary for qmp_block_job_finalize, qmp_job_finalize and
job_exit, since everyone else calls through job_exit.
One test needed adapting, since it calls job_finalize directly, so it
manually needs to acquire the correct context.
Signed-off-by: Stefan Reiter <s.reiter@proxmox.com>
Message-Id: <20200407115651.69472-2-s.reiter@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
external_snapshot_prepare() tries to move the overlay to the AioContext
of the backing file (the snapshotted node). However, it's possible that
this doesn't work, but the backing file can instead be moved to the
overlay's AioContext (e.g. opening the backing chain for a mirror
target).
bdrv_append() already indirectly uses bdrv_attach_node(), which takes
care to move nodes to make sure they use the same AioContext and which
tries both directions.
So the problem has a simple fix: Just delete the unnecessary extra
bdrv_try_set_aio_context() call in external_snapshot_prepare() and
instead assert in bdrv_append() that both nodes were indeed moved to the
same AioContext.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-6-kwolf@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev-snapshot returned an error if the overlay was already in use,
which it defined as having any BlockBackend parent. This is in fact both
too strict (some parents can tolerate the change of visible data caused
by attaching a backing file) and too loose (some non-BlockBackend
parents may not be happy with it).
One important use case that is prevented by the too strict check is live
storage migration with blockdev-mirror. Here, the target node is
usually opened without a backing file so that the active layer is
mirrored while its backing chain can be copied in the background.
The backing chain should be attached to the mirror target node when
finalising the job, just before switching the users of the source node
to the new copy (at which point the mirror job still has a reference to
the node). drive-mirror did this automatically, but with blockdev-mirror
this is the job of the QMP client, so it needs a way to do this.
blockdev-snapshot is the obvious way, so this patch makes it work in
this scenario. The new condition is that no parent uses CONSISTENT_READ
permissions. This will ensure that the operation will still be blocked
when the node is attached to the guest device, so blockdev-snapshot
remains safe.
(For the sake of completeness, x-blockdev-reopen can be used to achieve
the same, however it is a big hammer, performs the graph change
completely unchecked and is still experimental. So even with the option
of using x-blockdev-reopen, there are reasons why blockdev-snapshot
should be able to perform this operation.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200310113831.27293-3-kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin WolfandMarkus Armbruster
Pavel DovgalyukandPaolo Bonzini
Stefan Hajnoczi
Max ReitzandKevin Wolf
Eric BlakeandKevin Wolf
Stefan ReiterandKevin Wolf