Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Change the qemu_strtosz() & friends to return -EINVAL when @endptr is
null and the conversion doesn't consume the string completely.
Matches how qemu_strtol() & friends work.
Only test_qemu_strtosz_simple() passes a null @endptr. No functional
change there, because its conversion consumes the string.
Simplify callers that use @endptr only to fail when it doesn't point
to '\0' to pass a null @endptr instead.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com> (maintainer:X86)
Cc: Kevin Wolf <kwolf@redhat.com> (supporter:Block layer core)
Cc: Max Reitz <mreitz@redhat.com> (supporter:Block layer core)
Cc: qemu-block@nongnu.org (open list:Block layer core)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1487708048-2131-22-git-send-email-armbru@redhat.com>
With qemu_strtosz(), no suffix means mebibytes. It's used rarely.
I'm going to add a similar function where no suffix means bytes.
Rename qemu_strtosz() to qemu_strtosz_MiB() to make the name
qemu_strtosz() available for the new function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1487708048-2131-16-git-send-email-armbru@redhat.com>
When running certain HMP commands ("info registers", "info cpustats",
"info tlb", "nmi", "memsave" or dumping virtual memory) with the "none"
machine, QEMU crashes with a segmentation fault. This happens because the
"none" machine does not have any CPUs by default, but these HMP commands
did not check for a valid CPU pointer yet. Add such checks now, so we get
an error message about the missing CPU instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1484309555-1935-1-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 7a9877a made the 'device' parameter to BlockIOThrottle
optional, favoring 'id' instead. But it forgot to update the
HMP usage to set has_device, which makes all attempts to change
throttling via HMP fail with "Need exactly one of 'device' and 'id'"
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170120230359.4244-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Those could probably be squashed with earlier patches, however I
couldn't easily identify them, test them or check if there are still
necessary on various platforms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Considering 'id' is mandatory for user_creatable objects/backends
and user_creatable_add_type() always has it as an argument
regardless of where from it is called CLI/monitor or QMP,
Fix issue by adding 'id' property to hostmem backends and
set it in user_creatable_add_type() for every object that
implements 'id' property. Then later at query-memdev time
get 'id' from object directly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484052795-158195-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Simplify code by dropping ~57LOC by merging user_creatable_add()
into user_creatable_add_opts() and using the later from monitor.
Along with it allocate opts_visitor_new() once in user_creatable_add_opts().
As result we have one less API func and a more readable/simple
user_creatable_add_opts() vs user_creatable_add().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1484052795-158195-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We forgot to assign true to params->has_x_checkpoint_delay parameter
in qmp_query_migrate_parameters.
Without this, qmp command 'query-migrate-parameters' doesn't show the
default value for x-checkpoint-delay option.
This also fixes the fact that HMP was relying on unspecified behavior by
reading x_checkpoint_delay without checking has_x_checkpoint_delay.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
A job ID is always required in order to create a block job on a
non-root node. The default ID (obtained with bdrv_get_device_name())
is otherwise empty in this scenario and the job cannot be created.
The HMP block_stream command doesn't set a job ID and therefore it
doesn't allow streaming to intermediate nodes. One solution is to add
an extra parameter to set a job ID. The other solution is to simply
use the node name passed to block_stream as job ID. This won't work
if it's automatically generated (because it contains a '#') but is
otherwise simple enough for all other cases.
This way 'block_stream node3' will create a job with the ID 'node3'
and the good old 'block_stream virtio0' will keep the previous
behaviour and use 'virtio0' for the job ID.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The way to specify the node from which to copy data in the
block-stream operation is by using the 'base' parameter. This
parameter however takes a file name, not a node name.
Since we want to be able to perform this operation using only node
names, this patch adds a new 'base-node' parameter.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as
deprecated.
Move max-bandwidth and downtime-limit into migrate-set-parameters for
setting maximum migration speed and expected downtime limit parameters
respectively.
Change downtime units to milliseconds (only for new-command) and set
its upper bound limit to 2000 seconds.
Update the query part in both hmp and qmp qemu control interfaces.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
Also, we made a mistake in qemu 2.7 of returning an empty
string during 'query-migrate-parameters' when there is no
TLS, rather than omitting TLS details entirely. Technically,
this change risks breaking any 2.7 client that is hard-coded
to expect the parameter's existence; on the other hand, clients
that are portable to 2.6 already must be prepared for those
members to not be present.
And this gets rid of yet one more place where the QMP output
visitor is silently converting a NULL string into "" (which
is a hack I ultimately want to kill off).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The vhost-user & colo code is poking at the QemuOpts instance
in the CharDriverState struct, not realizing that it is valid
for this to be NULL. e.g. the following crash shows a codepath
where it will be NULL:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
617 QTAILQ_FOREACH(opt, &opts->head, next) {
[Current thread is 1 (Thread 0x7f1d4970bb40 (LWP 6603))]
(gdb) bt
#0 0x000055baf6ab4adc in qemu_opt_foreach (opts=0x0, func=0x55baf696b650 <net_vhost_chardev_opts>, opaque=0x7ffc51368c00, errp=0x7ffc51368e48) at util/qemu-option.c:617
#1 0x000055baf696b7da in net_vhost_parse_chardev (opts=0x55baf8ff9260, errp=0x7ffc51368e48) at net/vhost-user.c:314
#2 0x000055baf696b985 in net_init_vhost_user (netdev=0x55baf8ff9250, name=0x55baf879d270 "hostnet2", peer=0x0, errp=0x7ffc51368e48) at net/vhost-user.c:360
#3 0x000055baf6960216 in net_client_init1 (object=0x55baf8ff9250, is_netdev=true, errp=0x7ffc51368e48) at net/net.c:1051
#4 0x000055baf6960518 in net_client_init (opts=0x55baf776e7e0, is_netdev=true, errp=0x7ffc51368f00) at net/net.c:1108
#5 0x000055baf696083f in netdev_add (opts=0x55baf776e7e0, errp=0x7ffc51368f00) at net/net.c:1186
#6 0x000055baf69608c7 in qmp_netdev_add (qdict=0x55baf7afaf60, ret=0x7ffc51368f50, errp=0x7ffc51368f48) at net/net.c:1205
#7 0x000055baf6622135 in handle_qmp_command (parser=0x55baf77fb590, tokens=0x7f1d24011960) at /path/to/qemu.git/monitor.c:3978
#8 0x000055baf6a9d099 in json_message_process_token (lexer=0x55baf77fb598, input=0x55baf75acd20, type=JSON_RCURLY, x=113, y=19) at qobject/json-streamer.c:105
#9 0x000055baf6abf7aa in json_lexer_feed_char (lexer=0x55baf77fb598, ch=125 '}', flush=false) at qobject/json-lexer.c:319
#10 0x000055baf6abf8f2 in json_lexer_feed (lexer=0x55baf77fb598, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-lexer.c:369
#11 0x000055baf6a9d13c in json_message_parser_feed (parser=0x55baf77fb590, buffer=0x7ffc51369170 "}R\204\367\272U", size=1) at qobject/json-streamer.c:124
#12 0x000055baf66221f7 in monitor_qmp_read (opaque=0x55baf77fb530, buf=0x7ffc51369170 "}R\204\367\272U", size=1) at /path/to/qemu.git/monitor.c:3994
#13 0x000055baf6757014 in qemu_chr_be_write_impl (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:387
#14 0x000055baf6757076 in qemu_chr_be_write (s=0x55baf7610a40, buf=0x7ffc51369170 "}R\204\367\272U", len=1) at qemu-char.c:399
#15 0x000055baf675b3b0 in tcp_chr_read (chan=0x55baf90244b0, cond=G_IO_IN, opaque=0x55baf7610a40) at qemu-char.c:2927
#16 0x000055baf6a5d655 in qio_channel_fd_source_dispatch (source=0x55baf7610df0, callback=0x55baf675b25a <tcp_chr_read>, user_data=0x55baf7610a40) at io/channel-watch.c:84
#17 0x00007f1d3e80cbbd in g_main_context_dispatch () from /usr/lib64/libglib-2.0.so.0
#18 0x000055baf69d3720 in glib_pollfds_poll () at main-loop.c:213
#19 0x000055baf69d37fd in os_host_main_loop_wait (timeout=126000000) at main-loop.c:258
#20 0x000055baf69d38ad in main_loop_wait (nonblocking=0) at main-loop.c:506
#21 0x000055baf676587b in main_loop () at vl.c:1908
#22 0x000055baf676d3bf in main (argc=101, argv=0x7ffc5136a6c8, envp=0x7ffc5136a9f8) at vl.c:4604
(gdb) p opts
$1 = (QemuOpts *) 0x0
The crash occurred when attaching vhost-user net via QMP:
{
"execute": "chardev-add",
"arguments": {
"id": "charnet2",
"backend": {
"type": "socket",
"data": {
"addr": {
"type": "unix",
"data": {
"path": "/var/run/openvswitch/vhost-user1"
}
},
"wait": false,
"server": false
}
}
},
"id": "libvirt-19"
}
{
"return": {
},
"id": "libvirt-19"
}
{
"execute": "netdev_add",
"arguments": {
"type": "vhost-user",
"chardev": "charnet2",
"id": "hostnet2"
},
"id": "libvirt-20"
}
Code using chardevs should not be poking at the internals of the
CharDriverState struct. What vhost-user wants is a chardev that is
operating as reconnectable network service, along with the ability
to do FD passing over the connection. The colo code simply wants
a network service. Add a feature concept to the char drivers so
that chardev users can query the actual features they wish to have
supported. The QemuOpts member is removed to prevent future mistakes
in this area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
