Changes:
7b1eb5f ast27x0: Fix Makefile to unconditionally set CC to support correct cross-compilation
601d410 ast27x0: Fix missing SCU module reset for SSP and TSP initialization
80768e4 ast27x0: Initialize and enable SSP/TSP using SCU with reserved-memory from DTB
f8ab635 ast27x0: Show build date and git version
53294f5 Add initial support for AST27x0
b1c2803 Dynamically detects NPCM8XX UBOOT destination and size.
4f54dfc Automatically search for UBOOT location for NPCM8xx images.
The actual bootroms are not updated yet.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Link: https://lore.kernel.org/qemu-devel/2a89ad4c8f5665d07952a4f1749caa6ec0cd3d9c.1753654515.git.mjt@tls.msk.ru
[ clg: Update to latest vbootrom ]
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
git shortlog rel-1.16.3..rel-1.17.0
-----------------------------------
Andrej Kruták (1):
Add AHCI Power ON + ICC_ACTIVE into port setup code
Daniel Khodabakhsh (2):
boot: Force display of the boot menu when boot-menu-wait is a negative number
usb-hid: Support multiple USB HID devices by storing them in a linked list
Daniel Verkamp (3):
vbe: Add VBE 2.0+ OemData field to struct vbe_info
vgasrc: round up save/restore size
vbe: implement function 09h (get/set palette data)
Daniil Tatianin (1):
pciinit: don't misalign large BARs
Gerd Hoffmann (6):
limit address space used for pci devices, part two
drop obsolete acpi table code
drop acpi tables and hex includes
add romfile_loadbool()
update pci_pad_mem64 handling
ahci: add controller reset
Igor Mammedov (1):
fix smbios blob length overflow
Jiaxun Yang (1):
ahci: Fix hangs due to controller reset
Kevin O'Connor (14):
vgasrc: Use curmode_g instead of vmode_g when mode is the current video mode
vgasrc: Rename vgahw_get_linesize() to vgahw_minimum_linelength()
stdvgamodes: No need to store pelmask in vga_modes[]
stdvgamodes: Improve naming of dac palette tables
stdvga: Rename CGA palette functions
stdvga: Add comments to interface functions in stdvga.c
stdvga: Rename stdvga_toggle_intensity() to stdvga_set_palette_blinking()
stdvga: Rework stdvga palette index paging interface functions
stdvga: Rename stdvga_set_text_block_specifier() to stdvga_set_font_location()
stdvga: Rename stdvga_set_scan_lines() to stdvga_set_character_height()
stdvga: Rename stdvga_get_vde() to stdvga_get_vertical_size()
stdvga: Add stdvga_set_vertical_size() helper function
stdvgaio: Only read/write one color palette entry at a time
docs: Note v1.17.0 release
Mark Cave-Ayland (2):
esp-scsi: terminate DMA transfer when ESP data transfer completes
esp-scsi: indicate acceptance of MESSAGE IN phase data
Max Tottenham (1):
Add LBA 64bit support for reads beyond 2TB.
Steven Price (1):
vgabios: Fix generating modes list for static_functionality
nikolar via SeaBIOS (1):
kconfig: fix the check-lxdialog.sh to work with gcc 14+
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The HOMER is a region of memory used by host and firmware and
microconrollers. It has very little logic by itself, just some BAR
registers. Users of this memory should operate on it rather than
have HOMER implement them with MMIO registers, which is not the
right model.
This change switches the implementation of HOMER from MMIO to RAM,
and moves the OCC register implementation to in-memory structure
accesses performed by the OCC model.
This has the downside that access to unimplemented regions of HOMER
are no longer flagged. Perhaps that could be done by adding a memory
region for HOMER, and ram subregions under that for each implemented
part. But for now this takes the simpler approach.
Note: This brings some data structure definitions from skiboot, which
does not match QEMU coding style but is not changed to make comparisons
and updates simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This adds TPM pass through API.
Also, moves SLOF from github to gitlab.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This skiboot firmware importantly contains updates for HOMER/OCC bugs.
These subsystems have bitrotted in QEMU and skiboot and this update
allows new QEMU models to be exercised.
Power11 support is also added. This model is not yet merged in QEMU,
but firmware support will make development and testing simpler.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
This is SeaBIOS for the hppa architecture v18.
It allows us to emulate up to 256 GB RAM on 64-bit
guests and to boot HP-UX 64-bit one step further.
Fixes:
- Fix PDC_CACHE/PDC_CACHE_RET_SPID return value for space
register hashing on 64-bit HP-UX
- Fix IRT table entries to use slot number
- Increase PCI alignment for memory bars to 64k
New PDC functions & general enhancements:
- Allow up to 256 GB RAM on 64-bit machines
Signed-off-by: Helge Deller <deller@gmx.de>
This is SeaBIOS for the hppa architecture v17.
If comes with some important firmware and SCSI fixes and
prepares for futher development to support 64-bit HP-UX
and MPE/UX in the future.
New PDC functions & general enhancements:
- Add PDC_MODEL_GET_INSTALL_KERNEL firmware call
- Add PDC_PAT_EVENT firmware call
- Support ENTRY_IO_BOOTOUT
- Prefer memory-access over io-access of GSP serial port
- Disable LMMIO_DIRECT0 range during modification
- Small optimizations in IODC call
Fixes:
- esp-scsi: indicate acceptance of MESSAGE IN phase data
- Avoid crash when booting without SCSI controller
- Remove exec flag from hppa-firmware.img
- Fix LMMIO detection for PCI cards on Astro/Elroy
- Avoid trashing MPE IPL bootloader stack
- HP-UX 11 64-bit saves number of RAM pages in PAGE0 at 0x33c
- Fix return value of PDC_CACHE/PDC_CACHE_RET_SPID for space id hashing
- Allow PDC functions to act when called in narrow mode
- pcidevice: Use portaddr_t for io port addresses
Cleanups:
- Change default make target to "parisc"
- Clean the "out-64" directory on "make clean"
Signed-off-by: Helge Deller <deller@gmx.de>
Added loongarch UEFI BIOS support to compiled scripts.
UEFI code images require 16M alignment, flash images require
16M alignment, under the loongarch architecture.This is agreed
upon when the firmware is loaded in QEMU under Loongarch.
The naming of UEFI under loongarch refers to the x86 and arm naming methods,
and the UEFI image names in x86 and arm are:
edk2-i386-code.fd
edk2-i386-vars.fd
edk2-arm-code.fd
edk2-arm-vars.fd
So on loongarch, we named it:
edk2-loongarch64-code.fd
edk2-loongarch64-vars.fd
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20240724022245.1317884-1-lixianglai@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A new minor version of OpenSBI was just released after our bump to
OpenSBI 1.5. It contains significant bug fixes that it's worth doing
a new update for QEMU 9.1.
Submodule roms/opensbi 455de672dd..43cace6c36:
> lib: sbi: check result of pmp_get() in is_pmp_entry_mapped()
> lib: sbi: fwft: fix incorrect size passed to sbi_zalloc()
> lib: sbi: dbtr: fix potential NULL pointer dereferences
> include: Adjust Sscofpmf mhpmevent mask for upper 8 bits
> lib: sbi_hsm: Save/restore menvcfg only when it exists
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240805120259.1705016-2-dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Turned out hard-coding version and date in the Makefile wasn't a bright
idea. Updating it on edk2 updates is easily forgotten. Fetch the info
from git instead. Store in edk2-version, so this can be committed to
the repo and is present in tarballs too.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-ID: <20240327102448.61877-2-kraxel@redhat.com>
Michael TokarevandCédric Le Goater
Gerd Hoffmann
Nicholas Piggin
Alexey KardashevskiyandNicholas Piggin
Hao WuandPeter Maydell
Helge Deller
Mark Cave-Ayland
Xianglai LiandGerd Hoffmann
Daniel Henrique BarbozaandAlistair Francis