The 'tcp_chr_read' method has a 4k byte array used for copying
data between the socket and device. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O
hot path.
The 'buf' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-7-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'pty_chr_read' method has a 4k byte array used for copying
data between the PTY and device. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O
hot path.
The 'buf' array will be fully initialized when reading data off
the PTY.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-6-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'fd_chr_read' method has a 4k byte array used for copying
data between the socket and device. Skip the automatic zero-init
of this array to eliminate the performance overhead in the I/O
hot path.
The 'buf' array will be fully initialized when reading data off
the network socket.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20250610123709.835102-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the chardev is client, the socket file path in localAddr may be NULL.
This is because the socket path comes from getsockname(), according
to man page, getsockname() returns the current address bound by the
socket sockfd. If the chardev is client, it's socket is unbound sockfd.
Therefore, when computing the client chardev socket file path, using
remoteAddr is more appropriate.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20250225104526.2924175-1-haoqian.he@smartx.com>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
This patch implements a new chardev backend `hub` device, which
aggregates input from multiple backend devices and forwards it to a
single frontend device. Additionally, `hub` device takes the output
from the frontend device and sends it back to all the connected
backend devices. This allows for seamless interaction between
different backend devices and a single frontend interface.
The idea of the change is trivial: keep list of backend devices
(up to 4), init them on demand and forward data buffer back and
forth.
The following is QEMU command line example:
-chardev pty,path=/tmp/pty,id=pty0 \
-chardev vc,id=vc0 \
-chardev hub,id=hub0,chardevs.0=pty0,chardevs.1=vc0 \
-device virtconsole,chardev=hub0 \
-vnc 0.0.0.0:0
Which creates 2 backend devices: text virtual console (`vc0`) and a
pseudo TTY (`pty0`) connected to the single virtio hvc console with
the backend aggregator (`hub0`) help. `vc0` renders text to an image,
which can be shared over the VNC protocol. `pty0` is a pseudo TTY
backend which provides biderectional communication to the virtio hvc
console.
'chardevs.N' list syntax is used for the sake of compatibility with
the representation of JSON lists in 'key=val' pairs format of the
util/keyval.c, despite the fact that modern QAPI way of parsing,
namely qobject_input_visitor_new_str(), is not used. Choice of keeping
QAPI list syntax may help to smoothly switch to modern parsing in the
future.
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Reviewed-by: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Message-ID: <20250123085327.965501-3-r.peniaev@gmail.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
qemu_chardev_set_replay() was being called in chardev creation to
set up replay parameters even if the chardev is NULL.
A segfault can be reproduced by specifying '-serial chardev:bad' with
an rr=record mode.
Fix this with a NULL pointer check.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Resolves: Coverity CID 1559470
Fixes: 4c193bb129 ("chardev: set record/replay on the base device of a muxed device")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240828043337.14587-2-npiggin@gmail.com>
Frontends can be attached and detached during run-time (although detach
is not implemented, but will follow). Counter variable of muxes is not
enough for proper attach/detach management, so this patch implements
bitset: if bit is set for the `mux_bitset` variable, then frontend
device can be found in the `backend` array (yes, huge confusion with
backend and frontends names).
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20241014152408.427700-7-r.peniaev@gmail.com>
Add path option to the pty char backend which will create a symbolic
link to the given path that points to the allocated PTY.
This avoids having to make QMP or HMP monitor queries to find out what
the new PTY device path is.
Based on patch from Paulo Neves:
https://patchew.org/QEMU/1548509635-15776-1-git-send-email-ptsneves@gmail.com/
Tested with the following invocations that the link is created and
removed when qemu stops:
qemu-system-x86_64 -nodefaults -mon chardev=compat_monitor \
-chardev pty,path=test,id=compat_monitor0
qemu-system-x86_64 -nodefaults -monitor pty:test
# check QMP invocation with path set
qemu-system-x86_64 -nodefaults -qmp tcp:localhost:4444,server=on,wait=off
nc localhost 4444
> {"execute": "qmp_capabilities"}
> {"execute": "chardev-add", "arguments": {"id": "bar", "backend": {
"type": "pty", "data": {"path": "test" }}}}
# check QMP invocation with path not set
qemu-system-x86_64 -nodefaults -qmp tcp:localhost:4444,server=on,wait=off
nc localhost 4444
> {"execute": "qmp_capabilities"}
> {"execute": "chardev-add", "arguments": {"id": "bar", "backend": {
"type": "pty", "data": {}}}}
Also tested that when a link path is not passed invocations still work, e.g.:
qemu-system-x86_64 -monitor pty
Co-authored-by: Paulo Neves <ptsneves@gmail.com>
Signed-off-by: Paulo Neves <ptsneves@gmail.com>
[OP: rebase and address original patch review comments]
Signed-off-by: Octavian Purdila <tavip@google.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240806010735.2450555-1-tavip@google.com>
The 'reconnect' option only allows to specify the time in seconds,
which is way too long for certain workflows.
We have a lightweight disk backend server, which takes about 20ms to
live update, but due to this limitation in QEMU, previously the guest
disk controller would hang for one second because it would take this
long for QEMU to reinitialize the socket connection.
Introduce a new option called 'reconnect-ms', which is the same as
'reconnect', except the value is treated as milliseconds. These are
mutually exclusive and specifying both results in an error.
'reconnect' is also deprecated by this commit to make it possible to
remove it in the future as to not keep two options that control the
same thing.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240913094604.269135-1-d-tatianin@yandex-team.ru>
chardev events to a muxed device don't get recorded because e.g.,
qemu_chr_be_write() checks whether the base device has the record flag
set.
This can be seen when replaying a trace that has characters typed into
the console, an examination of the log shows they are not recorded.
Setting QEMU_CHAR_FEATURE_REPLAY on the base chardev fixes the problem.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20240813050638.446172-8-npiggin@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240813202329.1237572-16-alex.bennee@linaro.org>
This adds trace points to every error scenario in the chardev socket
backend that can lead to termination of the connection.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
