All helpers that rely on vstart >= vl are now doing early exits using
the VSTART_CHECK_EARLY_EXIT() macro. This macro will not only exit the
helper but also clear vstart.
We're still left with brconds that are skipping the helper, which is the
only place where we're clearing vstart. The pattern goes like this:
tcg_gen_brcond_tl(TCG_COND_GEU, cpu_vstart, cpu_vl, over);
(... calls helper that clears vstart ...)
gen_set_label(over);
return true;
This means that every time we jump to 'over' we're not clearing vstart,
which is an oversight that we're doing across the board.
Instead of setting vstart = 0 manually after each 'over' jump, remove
those brconds that are skipping helpers. The exception will be
trans_vmv_s_x() and trans_vfmv_s_f(): they don't use a helper and are
already clearing vstart manually in the 'over' label.
While we're at it, remove the (vl == 0) brconds from trans_rvbf16.c.inc
too since they're unneeded.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We're going to make changes that will required each helper to be
responsible for the 'vstart' management, i.e. we will relieve the
'vstart < vl' assumption that helpers have today.
Helpers are usually able to deal with vstart >= vl, i.e. doing nothing
aside from setting vstart = 0 at the end, but the tail update functions
will update the tail regardless of vstart being valid or not. Unifying
the tail update process in a single function that would handle the
vstart >= vl case isn't trivial (see [1] for more info).
This patch takes a blunt approach: do an early exit in every single
vector helper if vstart >= vl, unless the helper is guarded with
vstart_eq_zero in the translation. For those cases the helper is ready
to deal with cases where vl might be zero, i.e. throwing exceptions
based on it like vcpop_m() and first_m().
Helpers that weren't changed:
- vcpop_m(), vfirst_m(), vmsetm(), GEN_VEXT_VIOTA_M(): these are guarded
directly with vstart_eq_zero;
- GEN_VEXT_VCOMPRESS_VM(): guarded with vcompress_vm_check() that checks
vstart_eq_zero;
- GEN_VEXT_RED(): guarded with either reduction_check() or
reduction_widen_check(), both check vstart_eq_zero;
- GEN_VEXT_FRED(): guarded with either freduction_check() or
freduction_widen_check(), both check vstart_eq_zero.
Another exception is vext_ldst_whole(), who operates on effective vector
length regardless of the current settings in vtype and vl.
[1] https://lore.kernel.org/qemu-riscv/1590234b-0291-432a-a0fa-c5a6876097bc@linux.alibaba.com/
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 8ff8ac6329 added a conditional to guard the vext_ldst_whole()
helper if vstart >= evl. But by skipping the helper we're also not
setting vstart = 0 at the end of the insns, which is incorrect.
We'll move the conditional to vext_ldst_whole(), following in line with
the removal of all brconds vstart >= vl that the next patch will do. The
idea is to make the helpers responsible for their own vstart management.
Fix ldst_whole isns by:
- remove the brcond that skips the helper if vstart is >= evl;
- vext_ldst_whole() now does an early exit with the same check, where
evl = (vlenb * nf) >> log2_esz, but the early exit will also clear
vstart.
The 'width' param is now unneeded in ldst_whole_trans() and is also
removed. It was used for the evl calculation for the brcond and has no
other use now. The 'width' is reflected in vext_ldst_whole() via
log2_esz, which is encoded by GEN_VEXT_LD_WHOLE() as
"ctzl(sizeof(ETYPE))".
Suggested-by: Max Chou <max.chou@sifive.com>
Fixes: 8ff8ac6329 ("target/riscv: rvv: Add missing early exit condition for whole register load/store")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Max Chou <max.chou@sifive.com>
Message-ID: <20240314175704.478276-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
These insns have 2 paths: we'll either have vstart already cleared if
vstart_eq_zero or we'll do a brcond to check if vstart >= maxsz to call
the 'vmvr_v' helper. The helper will clear vstart if it executes until
the end, or if vstart >= vl.
For starters, the check itself is wrong: we're checking vstart >= maxsz,
when in fact we should use vstart in bytes, or 'startb' like 'vmvr_v' is
calling, to do the comparison. But even after fixing the comparison we'll
still need to clear vstart in the end, which isn't happening too.
We want to make the helpers responsible to manage vstart, including
these corner cases, precisely to avoid these situations:
- remove the wrong vstart >= maxsz cond from the translation;
- add a 'startb >= maxsz' cond in 'vmvr_v', and clear vstart if that
happens.
This way we're now sure that vstart is being cleared in the end of the
execution, regardless of the path taken.
Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240314175704.478276-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
trans_vmv_x_s, trans_vmv_s_x, trans_vfmv_f_s and trans_vfmv_s_f aren't
setting vstart = 0 after execution. This is usually done by a helper in
vector_helper.c but these functions don't use helpers.
We'll set vstart after any potential 'over' brconds, and that will also
mandate a mark_vs_dirty() too.
Fixes: dedc53cbc9 ("target/riscv: rvv-1.0: integer scalar move instructions")
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240314175704.478276-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 3b8022269c added the capability of named features/profile
extensions to be added in riscv,isa. To do that we had to assign priv
versions for each one of them in isa_edata_arr[]. But this resulted in a
side-effect: vendor CPUs that aren't running priv_version_latest started
to experience warnings for these profile extensions [1]:
| $ qemu-system-riscv32 -M sifive_e
| qemu-system-riscv32: warning: disabling zic64b extension for hart
0x00000000 because privilege spec version does not match
| qemu-system-riscv32: warning: disabling ziccamoa extension for
hart 0x00000000 because privilege spec version does not match
This is benign as far as the CPU behavior is concerned since disabling
both extensions is a no-op (aside from riscv,isa). But the warnings are
unpleasant to deal with, especially because we're sending user warnings
for extensions that users can't enable/disable.
Instead of enabling all named features all the time, separate them by
priv version. During finalize() time, after we decided which
priv_version the CPU is running, enable/disable all the named extensions
based on the priv spec chosen. This will be enough for a bug fix, but as
a future work we should look into how we can name these extensions in a
way that we don't need an explicit ext_name => priv_ver as we're doing
here.
The named extensions being added in isa_edata_arr[] that will be
enabled/disabled based solely on priv version can be removed from
riscv_cpu_named_features[]. 'zic64b' is an extension that can be
disabled based on block sizes so it'll retain its own flag and entry.
[1] https://lists.gnu.org/archive/html/qemu-devel/2024-03/msg02592.html
Reported-by: Clément Chigot <chigot@adacore.com>
Fixes: 3b8022269c ("target/riscv: add riscv,isa to named features")
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-ID: <20240312203214.350980-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Daniel P. Berrangé <berrange@redhat.com> pointed out that the coroutine
pool size heuristic is very conservative. Instead of halving
max_map_count, he suggested reserving 5,000 mappings for non-coroutine
users based on observations of guests he has access to.
Fixes: 86a637e481 ("coroutine: cap per-thread local pool size")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240320181232.1464819-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Use EPERM for seccomp filter instead of killing QEMU when
an attempt to spawn child process is made
* Reduce priority of POLLHUP handling for socket chardevs
to increase likelihood of pending data being processed
* Fix chardev I/O main loop integration when TLS is enabled
* Fix broken crypto test suite when distro disables
SM4 algorithm
* Improve diagnosis of failed crypto tests
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmX585EACgkQvobrtBUQ
# T98TIg//ekc/f0JrRs68hjmo/vfcHWGHDMbZagj48zZNIn8DhJmQdt+qrCjMrMGW
# 353nTawFuF3EO9ju/eRLO54T+p1+a3zX8TyO4tL1W+RY9HARPeqssmFemDPfkMfQ
# IFGv0M0vaxGZpBna7jlXfDK/hCbJexKoChyT4eSF9H1Tp9o6T2J9AWvB5WTYLoQ2
# GzusDqBLKTkKhxMTCqevkFD/yCkgIQKlX8mG188PoJnGMqpGzQLTyw9lo5Npi1nE
# nhXa2MrrSfusk0rtwEzT14sQ58U+MF4fLQxUC+knNX81FSv8Q6QDu4Stfhwc+az7
# ynO4b/3IzK+VCICb2QM1ZNoTZNLcLfw1jdFTIAt8wiE+BMSySNQtdneURZOynydy
# Qd0alPNb4zfVRIGVjoOj38HiOmIKp5riIsUsI03jjBAgJu47tYRi60Tq2t6KxVoP
# rpDd5Vmsd0AR+7acO29rp0aLB+x2/ANDY+1N1Xi4tQdblmKIziHPZzx6H49wbwev
# 8Jdghg10RpbdqIGOfZ9fn13iCDO+1/gy6g/jTe2tMZrZsyov904tDqyUCDCzAbTz
# B8lvnr0LfSX2DYBryGEHIa/eMN2TxPuzpvZP0JFO1QxJnOs9w3aHr1T6A1sCV4a3
# JjTu71LsomNMXj3t3ImBHzMlgQZoL5Bxoh7b7jbLO4cvnhRbiJk=
# =4HKW
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 19 Mar 2024 20:20:33 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
crypto: report which ciphers are being skipped during tests
crypto: use error_abort for unexpected failures
crypto: query gcrypt for cipher availability
crypto: factor out conversion of QAPI to gcrypt constants
Revert "chardev: use a child source for qio input source"
Revert "chardev/char-socket: Fix TLS io channels sending too much data to the backend"
chardev: lower priority of the HUP GSource in socket chardev
seccomp: report EPERM instead of killing process for spawn set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "link_depends" key has not been used since commit c46f76d158
("meson: specify fuzz linker script as a project arg", 2020-09-08),
and even before that it was only used for fork-fuzzing which we
removed in commit d2e6f9272d ("fuzz: remove fork-fuzzing scaffolding",
2023-02-16).
So, remove it for a very small simplification of meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids fetching blobs and tree references for branches we are not
going to worry about. Also skip tag references which are similarly not
useful and keep the default --prune. This keeps the .git data to
around 100M rather than the ~400M even a shallow clone takes.
So we can check the savings we also run a quick du while setting up
the build.
We also have to have special settings of GIT_FETCH_EXTRA_FLAGS for the
Windows build, the migration legacy test and the custom runners. In
the case of the custom runners we also move the free floating variable
to the runner template.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240312170011.1688444-1-alex.bennee@linaro.org>
rec->count.score is inside rec, which is freed before rec->count.score is.
Reorder the instructions
Reported by Coverity as CID 1539967.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce()
may have a parameter with NULL monitor pointer. Revert monitor_puts() in
do_inject_x86_mce() to fix, then the fact that we send the same message to
monitor and log is again more obvious.
Fixes: bf0c50d4aa (monitor: expose monitor_puts to rest of code)
Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
