Since CPU() macro is a simple cast, the following are equivalent:
Object *obj;
CPUState *cs = CPU(obj)
In order to ease static analysis when running
scripts/coccinelle/cpu_env.cocci from the previous commit,
replace:
- CPU_GET_CLASS(cpu);
+ CPU_GET_CLASS(obj);
Most code use the 'cs' variable name for CPUState handle.
Replace few 's' -> 'cs' to unify cpu_reset_hold() style.
No logical change in this patch.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240129164514.73104-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a variable is initialized to &struct->field, use it
in place. Rationale: while this makes the code more concise,
this also helps static analyzers.
Mechanical change using the following Coccinelle spatch script:
@@
type S, F;
identifier s, m, v;
@@
S *s;
...
F *v = &s->m;
<+...
- &s->m
+ v
...+>
Inspired-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240129164514.73104-2-philmd@linaro.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
[thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ARM_CPU_IRQ/FIQ definitions are used to index the GPIO
IRQ created calling qdev_init_gpio_in() in ARMCPU instance_init()
handler. To allow non-ARM code to raise interrupt on ARM cores,
move they to 'target/arm/cpu-qom.h' which is non-ARM specific and
can be included by any hw/ file.
File list to include the new header generated using:
$ git grep -wEl 'ARM_CPU_(\w*IRQ|FIQ)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-18-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Declare arm_cpu_mp_affinity() prototype in the new
"target/arm/multiprocessing.h" header so units in
hw/arm/ can use it without having to include the huge
target-specific "cpu.h".
File list to include the new header generated using:
$ git grep -lw arm_cpu_mp_affinity
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-11-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When interpreting CPU dumps where FEAT_NV and FEAT_NV2 are in use,
it's helpful to include the values of HCR_EL2.{NV,NV1,NV2} in the CPU
dump format, as a way of distinguishing when we are in EL1 as part of
executing guest-EL2 and when we are just in normal EL1.
Add the bits to the end of the log line that shows PSTATE and similar
information:
PSTATE=000003c9 ---- EL2h BTYPE=0 NV NV2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Enable FEAT_NV on the 'max' CPU, and stop filtering it out for the
Neoverse N2 and Neoverse V1 CPUs. We continue to downgrade FEAT_NV2
support to FEAT_NV for the latter two CPU types.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
For all targets, the CPU class returned from CPUClass::class_by_name()
and object_class_dynamic_cast(oc, CPU_RESOLVING_TYPE) need to be
compatible. Lets apply the check in cpu_class_by_name() for once,
instead of having the check in CPUClass::class_by_name() for individual
target.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Message-ID: <20231114235628.534334-4-gshan@redhat.com>
There is no architectural requirement that SME implies SVE, but
our implementation currently assumes it. (FEAT_SME_FA64 does
imply SVE.) So if you try to run a CPU with eg "-cpu max,sve=off"
you quickly run into an assert when the guest tries to write to
SMCR_EL1:
#6 0x00007ffff4b38e96 in __GI___assert_fail
(assertion=0x5555566e69cb "sm", file=0x5555566e5b24 "../../target/arm/helper.c", line=6865, function=0x5555566e82f0 <__PRETTY_FUNCTION__.31> "sve_vqm1_for_el_sm") at ./assert/assert.c:101
#7 0x0000555555ee33aa in sve_vqm1_for_el_sm (env=0x555557d291f0, el=2, sm=false) at ../../target/arm/helper.c:6865
#8 0x0000555555ee3407 in sve_vqm1_for_el (env=0x555557d291f0, el=2) at ../../target/arm/helper.c:6871
#9 0x0000555555ee3724 in smcr_write (env=0x555557d291f0, ri=0x555557da23b0, value=2147483663) at ../../target/arm/helper.c:6995
#10 0x0000555555fd1dba in helper_set_cp_reg64 (env=0x555557d291f0, rip=0x555557da23b0, value=2147483663) at ../../target/arm/tcg/op_helper.c:839
#11 0x00007fff60056781 in code_gen_buffer ()
Avoid this unsupported and slightly odd combination by
disabling SME when SVE is not present.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2005
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231127173318.674758-1-peter.maydell@linaro.org
The feature test functions isar_feature_*() now take up nearly
a thousand lines in target/arm/cpu.h. This header file is included
by a lot of source files, most of which don't need these functions.
Move the feature test functions to their own header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20231024163510.2972081-2-peter.maydell@linaro.org
The code for powering on a CPU in arm-powerctl.c has two separate
use cases:
* emulation of a real hardware power controller
* emulation of firmware interfaces (primarily PSCI) with
CPU on/off APIs
For the first case, we only need to reset the CPU and set its
starting PC and X0. For the second case, because we're emulating the
firmware we need to ensure that it's in the state that the firmware
provides. In particular, when we reset to a lower EL than the
highest one we are emulating, we need to put the CPU into a state
that permits correct running at that lower EL. We already do a
little of this in arm-powerctl.c (for instance we set SCR_HCE to
enable the HVC insn) but we don't do enough of it. This means that
in the case where we are emulating EL3 but also providing emulated
PSCI the guest will crash when a secondary core tries to use a
feature that needs an SCR_EL3 bit to be set, such as MTE or PAuth.
The hw/arm/boot.c code also has to support this "start guest code in
an EL that's lower than the highest emulated EL" case in order to do
direct guest kernel booting; it has all the necessary initialization
code to set the SCR_EL3 bits. Pull the relevant boot.c code out into
a separate function so we can share it between there and
arm-powerctl.c.
This refactoring has a few code changes that look like they
might be behaviour changes but aren't:
* if info->secure_boot is false and info->secure_board_setup is
true, then the old code would start the first CPU in Hyp
mode but without changing SCR.NS and NSACR.{CP11,CP10}.
This was wrong behaviour because there's no such thing
as Secure Hyp mode. The new code will leave the CPU in SVC.
(There is no board which sets secure_boot to false and
secure_board_setup to true, so this isn't a behaviour
change for any of our boards.)
* we don't explicitly clear SCR.NS when arm-powerctl.c
does a CPU-on to EL3. This was a no-op because CPU reset
will reset to NS == 0.
And some real behaviour changes:
* we no longer set HCR_EL2.RW when booting into EL2: the guest
can and should do that themselves before dropping into their
EL1 code. (arm-powerctl and boot did this differently; I
opted to use the logic from arm-powerctl, which only sets
HCR_EL2.RW when it's directly starting the guest in EL1,
because it's more correct, and I don't expect guests to be
accidentally depending on our having set the RW bit for them.)
* if we are booting a CPU into AArch32 Secure SVC then we won't
set SCR.HCE any more. This affects only the vexpress-a15 and
raspi2b machine types. Guests booting in this case will either:
- be able to set SCR.HCE themselves as part of moving from
Secure SVC into NS Hyp mode
- will move from Secure SVC to NS SVC, and won't care about
behaviour of the HVC insn
- will stay in Secure SVC, and won't care about HVC
* on an arm-powerctl CPU-on we will now set the SCR bits for
pauth/mte/sve/sme/hcx/fgt features
The first two of these are very minor and I don't expect guest
code to trip over them, so I didn't judge it worth convoluting
the code in an attempt to keep exactly the same boot.c behaviour.
The third change fixes issue 1899.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1899
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230926155619.4028618-1-peter.maydell@linaro.org
