Use abi_ullong not uint64_t so that the alignment of the field
and therefore the layout of the struct is correct.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The code in setup_rt_frame reads two words at haddr, but locks only one.
This patch fixes it to lock both.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
qemu-hppa may crash when delivering a signal. It can be demonstrated with
this program. Compile the program with "hppa-linux-gnu-gcc -O2 signal.c"
and run it with "qemu-hppa -one-insn-per-tb a.out". It reports that the
address of the flag is 0xb4 and it crashes when attempting to touch it.
#include <stdio.h>
#include <stdlib.h>
#include <sys/time.h>
#include <signal.h>
sig_atomic_t flag;
void sig(int n)
{
printf("&flag: %p\n", &flag);
flag = 1;
}
int main(void)
{
struct sigaction sa;
struct itimerval it;
sa.sa_handler = sig;
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_RESTART;
if (sigaction(SIGALRM, &sa, NULL)) perror("sigaction"), exit(1);
it.it_interval.tv_sec = 0;
it.it_interval.tv_usec = 100;
it.it_value.tv_sec = it.it_interval.tv_sec;
it.it_value.tv_usec = it.it_interval.tv_usec;
if (setitimer(ITIMER_REAL, &it, NULL)) perror("setitimer"), exit(1);
while (1) {
}
}
The reason for the crash is that the signal handling routine doesn't clear
the 'N' flag in the PSW. If the signal interrupts a thread when the 'N'
flag is set, the flag remains set at the beginning of the signal handler
and the first instruction of the signal handler is skipped.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: qemu-stable@nongnu.org
Signed-off-by: Helge Deller <deller@gmx.de>
Move the various open_cpuinfo functions into new files.
Move the m68k open_hardware function as well.
All other guest architectures get a boilerplate empty file.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Copy each guest kernel's default value, then bound it
against reserved_va or the host address space.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
msync() uses the flags MS_ASYNC, MS_INVALIDATE and MS_SYNC, which differ
between platforms, specifcally on alpha and hppa.
Add a target to host translation for those and wire up a nicer strace
output.
This fixes the testsuite of the macaulay2 debian package with a hppa-linux
guest on a x86-64 host.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <Y5rMcts4qe15RaVN@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The glibc on the hppa platform uses the "iitlbp %r0,(%sr0, %r0)"
assembler instruction as ABORT_INSTRUCTION.
If this (in userspace context) illegal assembler statement is found,
dump the registers and report the failure to userspace the same way as
the Linux kernel on physical hardware.
For other illegal instructions report TARGET_ILL_ILLOPC instead of
TARGET_ILL_ILLOPN as si_code.
Additionally add the missing EXCP_BREAK exception handler which occurs
when the "break x,y" assembler instruction is executed and report
EXCP_ASSIST traps.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <Y1osHVsylkuZNUnY@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We don't emulate a preemptive kernel on this level, and the hppa architecture
doesn't allow context switches on the gateway page. So we always have to return
to sc_iaoq[] and not to gr[31].
This fixes the remaining random segfaults which still occured.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-8-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The hppa target requires a much bigger stack than many other targets,
and the Linux kernel allocates 80 MB by default for it.
This patch increases the guest stack for hppa to 80MB, and prevents
that this default stack size gets reduced by a lower stack limit on the
host.
Since the stack grows upwards on hppa, the stack_limit value marks the
upper boundary of the stack. Fix the output of /proc/self/maps (in the
guest) to show the [stack] marker on the correct memory area.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-6-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In Linux kernel v5.18 the vDSO for signal trampoline was added.
This code mimiks the bare minimum of this vDSO and thus avoids that the
parisc emulation needs executable stacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20220924114501.21767-4-deller@gmx.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This program:
int main(void) { asm("bv %r0(%r0)"); return 0; }
produces on real hppa hardware the expected segfault:
SIGSEGV {si_signo=SIGSEGV, si_code=SEGV_MAPERR, si_addr=0x3} ---
killed by SIGSEGV +++
Segmentation fault
But when run on linux-user you get instead internal qemu errors:
ERROR: linux-user/hppa/cpu_loop.c:172:cpu_loop: code should not be reached
Bail out! ERROR: linux-user/hppa/cpu_loop.c:172:cpu_loop: code should not be reached
ERROR: accel/tcg/cpu-exec.c:933:cpu_exec: assertion failed: (cpu == current_cpu)
Bail out! ERROR: accel/tcg/cpu-exec.c:933:cpu_exec: assertion failed: (cpu == current_cpu)
Fix it by adding the missing case for the EXCP_IMP trap in
cpu_loop() and raise a segfault.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <YtWNC56seiV6VenA@p100>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
