Add new "select" and "imply" directives if needed. The resulting
config-devices.mak files are the same as before.
Builds without default devices will become much smaller
than before, and qtests fail (as expected, though suboptimal)
for mips64-softmmu because most tests do not use -nodefaults,
so remove it from build-without-defaults
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AN536 is another FPGA image for the MPS3 development board. Unlike
the existing FPGA images we already model, this board uses a Cortex-R
family CPU, and it does not use any equivalent to the M-profile
"Subsystem for Embedded" SoC-equivalent that we model in hw/arm/armsse.c.
It's therefore more convenient for us to model it as a completely
separate C file.
This commit adds the basic skeleton of the board model, and the
code to create all the RAM and ROM. We assume that we're probably
going to want to add more images in future, so use the same
base class/subclass setup that mps2-tz.c uses, even though at
the moment there's only a single subclass.
Following commits will add the CPUs and the peripherals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240206132931.38376-9-peter.maydell@linaro.org
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Allow both user-only and system mode to run pa2.0 cpus.
Avoid creating a separate qemu-system-hppa64 binary;
force the qemu-hppa binary to use TARGET_ABI32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable Windows-specific defaults with a machine file, so that related
options can be automatically parsed and included in the help message.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is useful to extend the number of available PCIe devices to KVM guests
for passthrough scenarios and also to expose these models to a different
(big endian) architecture. Introduce a new config PCIE_DEVICES to select
models, Intel Ethernet adapters and one USB controller. These devices all
support MSI-X which is a requirement on s390x as legacy INTx are not
supported.
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-ID: <20230712080146.839113-1-clg@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we moved the arm default CONFIGs into Kconfig and removed them
from default.mak, we made it harder to identify which CONFIGs are
selected by default in case users want to disable them.
Bring back the default entries into default.mak, but keep them
commented out. This way users can keep their workflows of editing
default.mak to remove build options without needing to search through
Kconfig.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230523180525.29994-3-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move all the CONFIG_FOO=y from default.mak into "default y if TCG"
statements in Kconfig. That way they won't be selected when
CONFIG_TCG=n.
I'm leaving CONFIG_ARM_VIRT in default.mak because it allows us to
keep the two default.mak files not empty and keep aarch64-default.mak
including arm-default.mak. That way we don't surprise anyone that's
used to altering these files.
With this change we can start building with --disable-tcg.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-12-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We are about to enable the build without TCG, so CONFIG_SEMIHOSTING
and CONFIG_ARM_COMPATIBLE_SEMIHOSTING cannot be unconditionally set in
default.mak anymore. So reflect the change in a Kconfig.
Instead of using semihosting/Kconfig, use a target-specific file, so
that the change doesn't affect other architectures which might
implement semihosting in a way compatible with KVM.
The selection from ARM_v7M needs to be removed to avoid a cycle during
parsing.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230426180013.14814-11-farosas@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Both TCG and KVM emulate ckc, cputm, last_break and prefix, and it's
quite useful to have them during debugging. Right now they are grouped
together with KVM-only pp, pfault_token, pfault_select and
pfault_compare in s390-virt.xml, and are not available when debugging
TCG-emulated code.
Move KVM-only registers into the new s390-virt-kvm.xml file. Advertise
s390-virt.xml always, and the new s390-virt-kvm.xml only for KVM.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230314101813.174874-1-iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mirroring the upstream gdb xml files, the two stack boundary
registers are separated out.
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Paolo Bonzini
Peter Maydell
Inès VarholandPeter Maydell
Akihiko OdakiandAlex Bennée
BALATON ZoltanandDaniel Henrique Barboza
Richard Henderson
Jiajie ChenandSong Gao
Cédric Le GoaterandPaolo Bonzini
Fabiano RosasandPeter Maydell
Ilya LeoshkevichandThomas Huth