For simplicity, always run BlockDevOps .drained_begin/end/poll()
callbacks in the main loop thread. This makes it easier to implement the
callbacks and avoids extra locks.
Move the function pointer declarations from the I/O Code section to the
Global State section for BlockDevOps, BdrvChildClass, and BlockDriver.
Narrow IO_OR_GS_CODE() to GLOBAL_STATE_CODE() where appropriate.
The test-bdrv-drain test case calls bdrv_drain() from an IOThread. This
is now only allowed from coroutine context, so update the test case to
run in a coroutine.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230516190238.8401-11-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A zone append command is a write operation that specifies the first
logical block of a zone as the write position. When writing to a zoned
block device using zone append, the byte offset of the call may point at
any position within the zone to which the data is being appended. Upon
completion the device will respond with the position where the data has
been written in the zone.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508051510.177850-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add zoned device option to host_device BlockDriver. It will be presented only
for zoned host block devices. By adding zone management operations to the
host_block_device BlockDriver, users can use the new block layer APIs
including Report Zone and four zone management operations
(open, close, finish, reset, reset_all).
Qemu-io uses the new APIs to perform zoned storage commands of the device:
zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
zone_finish(zf).
For example, to test zone_report, use following command:
$ ./build/qemu-io --image-opts -n driver=host_device, filename=/dev/nullb0
-c "zrp offset nr_zones"
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-4-faithilikerun@gmail.com
Message-id: 20230324090605.28361-4-faithilikerun@gmail.com
[Adjust commit message prefix as suggested by Philippe Mathieu-Daudé
<philmd@linaro.org> and remove spurious ret = -errno in
raw_co_zone_mgmt().
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At the protocol level, has_variable_length only needs to be true in the
very special case of host CD-ROM drives, so that they do not need an
explicit monitor command to read the new size when a disc is loaded
in the tray.
However, at the format level has_variable_length has to be true for all
raw blockdevs and for all filters, even though in practice the length
depends on the underlying file and thus will not change except in the
case of host CD-ROM drives.
As a first step towards computing an accurate value of has_variable_length,
add the value into the BlockLimits structure and initialize the field
from the BlockDriver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230407153303.391121-2-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_sync() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-13-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pdiscard() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-9-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_flush() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-8-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_block_status() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-5-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a write request is converted into a write zeroes request by the
detect-zeroes= feature, it is no longer associated with an I/O buffer.
The BDRV_REQ_REGISTERED_BUF flag doesn't make sense without an I/O
buffer and must be cleared because bdrv_co_do_pwrite_zeroes() fails with
-EINVAL when it's set.
Fiona Ebner <f.ebner@proxmox.com> bisected and diagnosed this QEMU 7.2
regression where writes containing zeroes to a blockdev with
discard=unmap,detect-zeroes=unmap fail.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1404
Fixes: e8b6535533 ("block: add BDRV_REQ_REGISTERED_BUF request flag")
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230207203719.242926-2-stefanha@redhat.com>
bdrv_debug_event() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper_mixed to move the actual function
into a coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-14-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan HajnocziandKevin Wolf
Sam LiandStefan Hajnoczi
Emanuele Giuseppe EspositoandKevin Wolf
Paolo BonziniandKevin Wolf