Coverity complains that the check introduced in commit 3f934817 suggests
that qiov could be NULL and we dereference it before reaching the check.
In fact, all of the callers pass a non-NULL pointer, so just remove the
misleading check.
Resolves: Coverity CID 1542668
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240327192750.204197-1-kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Same rationale as for commit "block-backend: fix edge case in
bdrv_next() where BDS associated to BB changes". The block graph might
change between the bdrv_next() call and the bdrv_next_cleanup() call,
so it could be that the associated BDS is not the same that was
referenced previously anymore. Instead, rely on bdrv_next() to set
it->bs to the BDS it referenced and unreference that one in any case.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-4-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some operations, e.g. block-stream, perform reads while discarding the
results (only copy-on-read matters). In this case, they will pass NULL
as the target QEMUIOVector, which will however trip bdrv_pad_request,
since it wants to extend its passed vector. In particular, this is the
case for the blk_co_preadv() call in stream_populate().
If there is no qiov, no operation can be done with it, but the bytes
and offset still need to be updated, so the subsequent aligned read
will actually be aligned and not run into an assertion failure.
In particular, this can happen when the request alignment of the top
node is larger than the allocated part of the bottom node, in which
case padding becomes necessary. For example:
> ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M -o cluster_size=32768
> ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2
> ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2
> ./qemu-system-x86_64 --qmp stdio \
> --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \
> <<EOF
> {"execute": "qmp_capabilities"}
> {"execute": "blockdev-add", "arguments": { "driver": "compress", "file": "node0", "node-name": "node1" } }
> {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node1" } }
> EOF
Originally-by: Stefan Reiter <s.reiter@proxmox.com>
Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
[FE: do update bytes and offset in any case
add reproducer to commit message]
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20240322095009.346989-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling job_pause_point() while holding the graph reader lock
potentially results in a deadlock: bdrv_graph_wrlock() first drains
everything, including the mirror job, which pauses it. The job is only
unpaused at the end of the drain section, which is when the graph writer
lock has been successfully taken. However, if the job happens to be
paused at a pause point where it still holds the reader lock, the writer
lock can't be taken as long as the job is still paused.
Mark job_pause_point() as GRAPH_UNLOCKED and fix mirror accordingly.
Cc: qemu-stable@nongnu.org
Buglink: https://issues.redhat.com/browse/RHEL-28125
Fixes: 004915a96a ("block: Protect bs->backing with graph_lock")
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240313153000.33121-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the commit 05e385d2a9 ("error: Move ERRP_GUARD() to the beginning
of the function"), there are new codes that don't put ERRP_GUARD() at
the beginning of the functions.
As stated in the commit 05e385d2a9: "include/qapi/error.h advises to put
ERRP_GUARD() right at the beginning of the function, because only then
can it guard the whole function.", so clean up the few spots
disregarding the advice.
Inspired-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240312060337.3240965-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vmdk_parse_extents() passes @errp to error_prepend(), and its @errp
is from vmdk_open().
Though, vmdk_open(), as a BlockDriver.bdrv_open(), gets the @errp
parameter which is pointer of its caller's local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Fam Zheng <fam@euphon.net>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-13-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The vdi_co_do_create() passes @errp to error_prepend() without
ERRP_GUARD(), and its @errp parameter is so widely sourced that it is
necessary to protect it with ERRP_GUARD().
To avoid the potential issues as [1] said, add missing ERRP_GUARD() at
the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Weil <sw@weilnetz.de>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-12-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/snapshot.c, there are 2 functions passing @errp to
error_prepend() without ERRP_GUARD():
- bdrv_all_delete_snapshot()
- bdrv_all_goto_snapshot()
As the APIs exposed in include/block/snapshot.h, they could be called
by other modules.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of these 2 functions.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240311033822.3142585-11-zhao1.liu@linux.intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The bdrv_qed_co_invalidate_cache() passes @errp to error_prepend()
without ERRP_GUARD().
Though it is a BlockDriver.bdrv_co_invalidate_cache() method, and
currently its @errp parameter only points to callers' local_err, to
follow the requirement of @errp, add missing ERRP_GUARD() at the
beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-10-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In block/qcow2.c, there are 2 functions passing @errp to error_prepend()
without ERRP_GUARD():
- qcow2_co_create()
- qcow2_co_truncate()
There are too many possible callers to check the impact of the defect;
it may or may not be harmless. Thus it is necessary to protect @errp with
ERRP_GUARD().
Therefore, to avoid the issue like [1] said, add missing ERRP_GUARD() at
their beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-ID: <20240311033822.3142585-9-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The qcow2_co_can_store_new_dirty_bitmap() passes @errp to
error_prepend(). As a BlockDriver.bdrv_co_can_store_new_dirty_bitmap
method, it's called by bdrv_co_can_store_new_dirty_bitmap().
Its caller is not being called anywhere, but as the API in
include/block/block-io.h, we can't ensure what kind of @errp future
users will pass in.
To avoid potential issues as [1] said, add missing ERRP_GUARD() at the
beginning of qcow2_co_can_store_new_dirty_bitmap().
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: John Snow <jsnow@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-8-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
In nvme.c, there are 3 functions passing @errp to error_prepend()
without ERRP_GUARD():
- nvme_init_queue()
- nvme_create_queue_pair()
- nvme_identify()
All these 3 functions take their @errp parameters from the
nvme_file_open(), which is a BlockDriver.bdrv_nvme() method and its
@errp points to its caller's local_err.
Though these 3 cases haven't trigger the issue like [1] said, to
follow the requirement of @errp, add missing ERRP_GUARD() at their
beginning.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Fam Zheng <fam@euphon.net>
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240311033822.3142585-7-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The nbd_co_do_receive_one_chunk() passes @errp to error_prepend()
without ERRP_GUARD(), and though its @errp parameter points to its
caller's local_err, to follow the requirement of @errp, add missing
ERRP_GUARD() at the beginning of this function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: Eric Blake <eblake@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-6-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As the comment in qapi/error, passing @errp to error_prepend() requires
ERRP_GUARD():
* = Why, when and how to use ERRP_GUARD() =
*
* Without ERRP_GUARD(), use of the @errp parameter is restricted:
...
* - It should not be passed to error_prepend(), error_vprepend() or
* error_append_hint(), because that doesn't work with &error_fatal.
* ERRP_GUARD() lifts these restrictions.
*
* To use ERRP_GUARD(), add it right at the beginning of the function.
* @errp can then be used without worrying about the argument being
* NULL or &error_fatal.
ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user
can't see this additional information, because exit() happens in
error_setg earlier than information is added [1].
The cbw_open() passes @errp to error_prepend() without ERRP_GUARD().
Though it is the BlockDriver.bdrv_open() method, and currently its
@errp parameter only points to callers' local_err, to follow the
requirement of @errp, add missing ERRP_GUARD() at the beginning of this
function.
[1]: Issue description in the commit message of commit ae7c80a7bd
("error: New macro ERRP_GUARD()").
Cc: John Snow <jsnow@redhat.com>
Cc: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20240311033822.3142585-5-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- LUKS support for detached headers
- Update x86 CPU model docs and script
- Add missing close of chardev QIOChannel
- More trace events o nTKS handshake
- Drop unsafe VNC constants
- Increase NOFILE limit during startup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmXGMNUACgkQvobrtBUQ
# T998JQ//SqQ3L/AZmhE5cIwZ1XipSMMZ/yEoVIyniA3tL41S7Oimj3O9XvY68TEG
# nnj9Oh+zOlVLxauTHAczveJ7z+XfonQZS3HrbGRUTHU+ezGVjyM618e/h9pSQtYI
# +CCkrjtey1NoT42/um4D/bKg/B2XQeulS+pD12Z9l5zbqEZiw0R9+UwVIJ52G811
# 5UQgIjJ7GNFzalxqiMCkGc0nTyU8keEXQJcdZ4droo42DnU4pZeQWGDimzP61JnW
# 1Crm6aZSuUriUbVmxJde+2eEdPSR4rr/yQ4Pw06hoi1QJALSgGYtOTo8+qsyumHd
# us/2ouMrxOMdsIk4ViAkSTiaje9agPj84VE1Z229Y/uqZcEAuX572n730/kkzqUv
# ZDKxMz0v3rzpkjFmsgj5D4yqJaQp4zn1zYm98ld7HWJVIOf3GSvpaNg9J6jwN7Gi
# HKKkvYns9pxg3OSx++gqnM32HV6nnMDFiddipl/hTiUsnNlnWyTDSvJoNxIUU5+l
# /uEbbdt8xnxx1JP0LiOhgmz6N6FU7oOpaPuJ5CD8xO2RO8D1uBRvmpFcdOTDAfv0
# uYdjhKBI+quKjE64p7gNWYCoqZtipRIJ6AY2VaPU8XHx8GvGFwBLX64oLYiYtrBG
# gkv3NTHRkMhQw9cGQcZIgZ+OLU+1eNF+m9EV7LUjuKl0HWC3Vjs=
# =61zI
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 14:04:05 GMT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-fixes-pull-request' of https://gitlab.com/berrange/qemu:
tests: Add case for LUKS volume with detached header
crypto: Introduce 'detached-header' field in QCryptoBlockInfoLUKS
block: Support detached LUKS header creation using qemu-img
block: Support detached LUKS header creation using blockdev-create
crypto: Modify the qcrypto_block_create to support creation flags
qapi: Make parameter 'file' optional for BlockdevCreateOptionsLUKS
crypto: Support LUKS volume with detached header
io: add trace event when cancelling TLS handshake
chardev: close QIOChannel before unref'ing
docs: re-generate x86_64 ABI compatibility CSV
docs: fix highlighting of CPU ABI header rows
scripts: drop comment about autogenerated CPU API file
softmmu: remove obsolete comment about libvirt timeouts
ui: drop VNC feature _MASK constants
qemu_init: increase NOFILE soft limit on POSIX
crypto: Introduce SM4 symmetric cipher algorithm
meson: sort C warning flags alphabetically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though a LUKS header might be created with cryptsetup,
qemu-img should be enhanced to accommodate it as well.
Add the 'detached-header' option to specify the creation of
a detached LUKS header. This is how it is used:
$ qemu-img create --object secret,id=sec0,data=abc123 -f luks
> -o cipher-alg=aes-256,cipher-mode=xts -o key-secret=sec0
> -o detached-header=true header.luks
Using qemu-img or cryptsetup tools to query information of
an LUKS header image as follows:
Assume a detached LUKS header image has been created by:
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
Header image information could be queried using cryptsetup:
$ cryptsetup luksDump test-header.img
or qemu-img:
$ qemu-img info 'json:{"driver":"luks","file":{"filename":
> "test-payload.img"},"header":{"filename":"test-header.img"}}'
When using qemu-img, keep in mind that the entire disk
information specified by the JSON-format string above must be
supplied on the commandline; if not, an overlay check will reveal
a problem with the LUKS volume check logic.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[changed to pass 'cflags' to block_crypto_co_create_generic]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, enable the ability to choose the block device containing
a detachable LUKS header by adding the 'header' parameter to
BlockdevCreateOptionsLUKS.
Secondly, when formatting the LUKS volume with a detachable header,
truncate the payload volume to length without a header size.
Using the qmp blockdev command, create the LUKS volume with a
detachable header as follows:
1. add the secret to lock/unlock the cipher stored in the
detached LUKS header
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type": "secret", "id": "sec0", "data": "foo"}}'
2. create a header img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job0", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_header.img", "size":0 }}}'
3. add protocol blockdev node for header
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_header.img", "node-name":
> "detached-luks-header-storage"}}'
4. create a payload img with 0 size
$ virsh qemu-monitor-command vm '{"execute":"blockdev-create",
> "arguments":{"job-id":"job1", "options":{"driver":"file",
> "filename":"/path/to/detached_luks_payload_raw.img", "size":0}}}'
5. add protocol blockdev node for payload
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments": {"driver":"file", "filename":
> "/path/to/detached_luks_payload_raw.img", "node-name":
> "luks-payload-raw-storage"}}'
6. do the formatting with 128M size
$ virsh qemu-monitor-command c81_node1 '{"execute":"blockdev-create",
> "arguments":{"job-id":"job2", "options":{"driver":"luks", "header":
> "detached-luks-header-storage", "file":"luks-payload-raw-storage",
> "size":134217728, "preallocation":"full", "key-secret":"sec0" }}}'
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
To support detached LUKS header creation, make the existing 'file'
field in BlockdevCreateOptionsLUKS optional.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
blkio_alloc_mem_region() requires that the requested buffer size is a
multiple of the memory-alignment property. If it isn't, the allocation
fails with a return value of -EINVAL.
Fix the call in blkio_resize_bounce_pool() to make sure the requested
size is properly aligned.
I observed this problem with vhost-vdpa, which requires page aligned
memory. As the virtio-blk device behind it still had 512 byte blocks, we
got bs->bl.request_alignment = 512, but actually any request that needed
a bounce buffer and was not aligned to 4k would fail without this fix.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131173140.42398-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since AioContext locks have been removed, a BlockBackend's AioContext
may really change at any time (only exception is that it is often
confined to a drained section, as noted in this patch). Therefore,
blk_get_aio_context() cannot rely on its root node's context always
matching that of the BlockBackend.
In practice, whether they match does not matter anymore anyway: Requests
can be sent to BDSs from any context, so anyone who requests the BB's
context should have no reason to require the root node to have the same
context. Therefore, we can and should remove the assertion to that
effect.
In addition, because the context can be set and queried from different
threads concurrently, it has to be accessed with atomic operations.
Buglink: https://issues.redhat.com/browse/RHEL-19381
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202144755.671354-2-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With GCC 14 the code failed to compile on i686 (and was wrong for any
version of GCC):
../block/blkio.c: In function ‘blkio_file_open’:
../block/blkio.c:857:28: error: passing argument 3 of ‘blkio_get_uint64’ from incompatible pointer type [-Wincompatible-pointer-types]
857 | &s->mem_region_alignment);
| ^~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t * {aka unsigned int *}
In file included from ../block/blkio.c:12:
/usr/include/blkio.h:49:67: note: expected ‘uint64_t *’ {aka ‘long long unsigned int *’} but argument is of type ‘size_t *’ {aka ‘unsigned int *’}
49 | int blkio_get_uint64(struct blkio *b, const char *name, uint64_t *value);
| ~~~~~~~~~~^~~~~
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20240130122006.2977938-1-rjones@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin WolfandPhilippe Mathieu-Daudé
Fiona EbnerandKevin Wolf
Stefan ReiterandKevin Wolf
Abhiram TilakandKevin Wolf
Zhao LiuandThomas Huth
Peter Maydell
Hyman HuangandDaniel P. Berrangé
Hanna CzenczekandKevin Wolf
Richard W.M. JonesandStefan Hajnoczi