Async QMP always raises a "ConnectError" on any connection error which
houses the cause in a second exception. We can check if this root cause
was python's ConnectionError to determine a fairly similar condition to
the original error check here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
This is in preparation for renaming qemu.aqmp to qemu.qmp. I should have
done this from this from the very beginning, but it's a convenient time
to make sure this churn is taken care of.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
It's a commonly needed definition, it can be re-exported by the root.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Copy the remaining type definitions from QMP into the qemu.aqmp.legacy
module. Now, users that require the legacy interface don't need to
import anything else but qemu.aqmp.legacy wrapper.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
This exception can be injected into any await statement. If we are
canceled via timeout, we want to clear the pending execution record on
our way out.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
asyncio can complain *very* loudly if you forget to back out of things
gracefully before the garbage collector starts destroying objects that
contain live references to asyncio Tasks.
The usual fix is just to remember to call aqmp.disconnect(), but for the
sake of the legacy wrapper and quick, one-off scripts where a graceful
shutdown is not necessarily of paramount imporance, add a courtesy
cleanup that will trigger prior to seeing screenfuls of confusing
asyncio tracebacks.
Note that we can't *always* save you from yourself; depending on when
the GC runs, you might just seriously be out of luck. The best we can do
in this case is to gently remind you to clean up after yourself.
(Still much better than multiple pages of incomprehensible python
warnings for the crime of forgetting to put your toys away.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
The old legacy runner no longer seems to work with output logging, so we
can't see failure logs when a test case fails. The new runner doesn't
(seem to) support Coverage.py yet, but seeing error output is a more
important feature.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220119193916.4138217-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
setuptools is a package that replaces the python stdlib 'distutils'. It
is generally installed by all venv-creating tools "by default". It isn't
actually needed at runtime for the qemu package, so our own setup.cfg
does not mention it as a dependency.
However, tox will create virtual environments that include it, and will
upgrade it to the very latest version. the 'venv' tool will also include
whichever version your host system happens to have.
Unfortunately, setuptools version 60.0.0 and above include a hack to
forcibly overwrite python's built-in distutils. The pylint tool that we
use to run code analysis checks on this package relies on distutils and
suffers regressions when setuptools >= 60.0.0 is present at all, see
https://github.com/PyCQA/pylint/issues/5704
Instruct tox and the 'check-dev' targets to avoid setuptools packages
that are too new, for now. Pipenv is unaffected, because setuptools 60
does not offer Python 3.6 support, and our pipenv config is pinned
against Python 3.6.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20220121005221.142236-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Mypy 0.930, released Dec 22, changes the way argparse objects are
considered. Crafting a definition that works under Python 3.6 and an
older mypy alongside newer versions simultaneously is ... difficult,
so... eh. Stub it out with an 'Any' definition to get the CI moving
again.
Oh well.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
0.920 (Released 2021-12-15) is not entirely happy with the
way that I was defining _FutureT:
qemu/aqmp/protocol.py:601: error: Item "object" of the upper bound
"Optional[Future[Any]]" of type variable "_FutureT" has no attribute
"done"
Update it with something a little mechanically simpler that works better
across a wider array of mypy versions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20220110191349.1841027-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
pylint's dependency astroid appears to have bugs in 2.9.1 and 2.9.2 (Dec
31 and Jan 3) that appear to erroneously expect the qemu namespace to
have an __init__.py file. astroid 2.9.3 (Jan 9) avoids that problem, but
appears to not understand a relative import within a namespace package.
Update the relative import - it was worth changing anyway, because these
packages will eventually be packaged and distributed separately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Message-id: 20220110191349.1841027-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
3.6 doesn't play keepaway with the socket object, so we don't need to go
fishing for it on this version. In fact, so long as 'sendmsg' is still
available, it's probably preferable to just use that method and only go
fishing for forbidden details when we absolutely have to.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In the case that the QEMU process actually launches -- but then dies so
quickly that we can't establish a QMP connection to it -- QEMUMachine
currently calls _post_shutdown() assuming that it never launched the VM
process.
This isn't true, though: it "merely" may have failed to establish a QMP
connection and the process is in the middle of its own exit path.
If we don't wait for the subprocess, the caller may get a bogus `None`
return for .exitcode(). This behavior was observed from
device-crash-test; after the switch to Async QMP, the timings were
changed such that it was now seemingly possible to witness the failure
of "vm.launch()" *prior* to the exitcode becoming available.
The semantic of the `_launched` property is changed in this
patch. Instead of representing the condition "launch() executed
successfully", it will now represent "has forked a child process
successfully". This way, wait() when called in the exit path won't
become a no-op.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If you create two instances of QEMUMachine(), they'll both create the
same nickname by default -- which is not that helpful.
Luckily, they'll both create unique temporary directories ... but due to
user configuration, they may share logging and sockfile directories,
meaning two instances can collide. The Python logging will also be quite
confusing, with no differentiation between the two instances.
Add an instance disambiguator (The memory address of the instance) to
the default nickname to foolproof this in all cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It doesn't matter if it was the user or the class itself that specified
where the sockfile should be created; the fact is that if we are using a
sockfile here, we created it and we can clean it up.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Analogous to temp_dir and log_dir, add a sock_dir property that defaults
to @temp_dir -- instead of base_temp_dir -- when the user hasn't
overridden the sock dir value in the initializer.
This gives us a much more unique directory to put sockfiles in by default.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20211118204620.1897674-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
When ConnectError is used to wrap an Exception that was initialized
without an error message, we are treated to a traceback with a rubbish
line like this:
... ConnectError: Failed to establish session:
Correct this to use the name of an exception as a fallback message:
... ConnectError: Failed to establish session: EOFError
Better!
Signed-off-by: John Snow <jsnow@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20211111143719.2162525-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
If we receive ConnectionResetError (ECONNRESET) while attempting to
perform capabilities negotiation -- prior to the establishment of the
async reader/writer tasks -- the disconnect function is not aware that
we are in an error pathway.
As a result, when attempting to close the StreamWriter, we'll see the
same ConnectionResetError that caused us to initiate a disconnect in the
first place, which will cause the disconnect task itself to fail, which
emits a CRITICAL logging event.
I still don't know if there's a smarter way to check to see if an
exception received at this point is "the same" exception as the one that
caused the initial disconnect, but for now the problem can be avoided by
improving the error pathway detection in the exit path.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 20211111143719.2162525-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Swap out the synchronous QEMUMonitorProtocol from qemu.qmp with the sync
wrapper from qemu.aqmp instead.
Add an escape hatch in the form of the environment variable
QEMU_PYTHON_LEGACY_QMP which allows you to cajole QEMUMachine into using
the old implementation, proving that both implementations work
concurrently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This is a wrapper around the async QMPClient that mimics the old,
synchronous QEMUMonitorProtocol class. It is designed to be
interchangeable with the old implementation.
It does not, however, attempt to mimic Exception compatibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20211026175612.4127598-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
John Snow
Willian RampazzoandPhilippe Mathieu-Daudé