Commit Graph
77 Commits
Author SHA1 Message Date
Richard Henderson 377ed92679 fpu/softfloat: Define floatN_silence_nan in terms of parts_silence_nan
Isolate the target-specific choice to 3 functions instead of 6.

The code in floatx80_default_nan tried to be over-general.  There are
only two targets that support this format: x86 and m68k.  Thus there
is no point in inventing a mechanism for snan_bit_is_one.

Move routines that no longer have ifdefs out of softfloat-specialize.h.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 8fb3d90203 fpu/softfloat: Clean up parts_default_nan
Reduce the number of ifdefs.  Correct the result for OpenRISC
and TriCore (although TriCore fixed in target-specific code).

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 0218a16e54 fpu/softfloat: Define floatN_default_nan in terms of parts_default_nan
Isolate the target-specific choice to 2 functions instead of 6.

The code in float16_default_nan was only correct for ARM, MIPS, and X86.
Though float16 support is rare among our targets.

The code in float128_default_nan was arguably wrong for Sparc.  While
QEMU supports the Sparc 128-bit insns, no real cpu enables it.

The code in floatx80_default_nan tried to be over-general.  There are
only two targets that support this format: x86 and m68k.  Thus there
is no point in inventing a value for snan_bit_is_one.

Move routines that no longer have ifdefs out of softfloat-specialize.h.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 3bd2dec1a1 fpu/softfloat: Pass FloatClass to pickNaNMulAdd
For each operand, pass a single enumeration instead of a pair of booleans.
The commit also merges multiple different ifdef-selected implementations
of pickNaNMulAdd into a single function whose body is ifdef-selected.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 4f251cfd52 fpu/softfloat: Pass FloatClass to pickNaN
For each operand, pass a single enumeration instead of a pair of booleans.
The commit also merges multiple different ifdef-selected implementations
of pickNaN into a single function whose body is ifdef-selected.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 03385dfdaa fpu/softfloat: Specialize on snan_bit_is_one
Only MIPS requires snan_bit_is_one to be variable.  While we are
specializing softfloat behaviour, allow other targets to eliminate
this runtime check.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Yongbok Kim <yongbok.kim@mips.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 5240a30dcc fpu/softfloat: Remove floatX_maybe_silence_nan
These functions are now unused.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 4885312f47 fpu/softfloat: Use float*_silence_nan in propagateFloat*NaN
We have already checked the arguments for SNaN;
we don't need to do it again.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Alex BennéeandRichard Henderson 6fed16b265 fpu/softfloat: re-factor float to float conversions
This allows us to delete a lot of additional boilerplate
code which is no longer needed.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:27:15 -07:00
Richard Henderson 0bcfbcbea5 fpu/softfloat: Replace float_class_msnan with parts_silence_nan
With a canonical representation of NaNs, we can silence an SNaN
immediately rather than delay until the final format is known.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:24:19 -07:00
Richard Henderson f7e598e264 fpu/softfloat: Replace float_class_dnan with parts_default_nan
With a canonical representation of NaNs, we can return the
default nan directly rather than delay the expansion until
the final format is known.

Note one case where we uselessly assigned to a.sign, which was
overwritten/ignored later when expanding float_class_dnan.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:24:19 -07:00
Richard Henderson 298b468e43 fpu/softfloat: Introduce parts_is_snan_frac
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:24:19 -07:00
Richard Henderson d619bb98fd fpu/softfloat: Split floatXX_silence_nan from floatXX_maybe_silence_nan
The new function assumes that the input is an SNaN and
does not double-check.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:24:19 -07:00
Richard Henderson bca52234d1 fpu/softfloat: Merge NO_SIGNALING_NANS definitions
Move the ifdef inside the relevant functions instead of
duplicating the function declarations.

Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-17 15:24:19 -07:00
Michael Clark f798f1e29b RISC-V FPU Support
Helper routines for FPU instructions and NaN definitions.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
2018-03-07 08:30:28 +13:00
Laurent Vivier 0f605c889c softfloat: use floatx80_infinity in softfloat
Since f3218a8 ("softfloat: add floatx80 constants")
floatx80_infinity is defined but never used.

This patch updates floatx80 functions to use
this definition.

This allows to define a different default Infinity
value on m68k: the m68k FPU defines infinity with
all bits set to zero in the mantissa.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-4-laurent@vivier.eu>
2018-03-04 17:27:35 +01:00
Laurent Vivier 88857aca93 softfloat: export some functions
Move fpu/softfloat-macros.h to include/fpu/

Export floatx80 functions to be used by target floatx80
specific implementations.

Exports:
  propagateFloatx80NaN(), extractFloatx80Frac(),
  extractFloatx80Exp(), extractFloatx80Sign(),
  normalizeFloatx80Subnormal(), packFloatx80(),
  roundAndPackFloatx80(), normalizeRoundAndPackFloatx80()

Also exports packFloat32() that will be used to implement
m68k fsinh, fcos, fsin, ftan operations.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-2-laurent@vivier.eu>
2018-03-04 17:22:55 +01:00
Alex Bennée d446830a3a fpu/softfloat: re-factor muladd
We can now add float16_muladd and use the common decompose and
canonicalize functions to have a single implementation for
float16/32/64 muladd functions.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-21 10:21:11 +00:00
Alex Bennée 13894527f5 fpu/softfloat: improve comments on ARM NaN propagation
Mention the pseudo-code fragment from which this is based.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-02-21 10:20:37 +00:00
Laurent Vivier e5b0cbe8e8 softfloat: define 680x0 specific values
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170611231633.32582-2-laurent@vivier.eu>
2017-06-15 09:15:38 +02:00
Bharata B RaoandDavid Gibson 5d51eaea84 softfloat: Fix the default qNAN for target-ppc
Currently float128_default_nan() returns 0xFFFF800000000000 in the
higher double word, but it should return 0x7FFF800000000000 which
is the correct higher double word for default qNAN on PowerPC.

Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-01-31 10:10:14 +11:00
Richard Henderson 005fa38d86 target-hppa: Add softfloat specializations
Like the original MIPS, HPPA has the MSB of an SNaN set.
However, it has different rules for silencing an SNaN:
(1) msb is cleared and (2) msb-1 must be set if the fraction
is now zero, and (implementation defined) may be set always.
I haven't checked real hardware but chose the set always
alternative because it's easy and within spec.

Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-23 09:52:40 -08:00
Pranith KumarandPeter Maydell dfd6076710 softfloat: Fix warn about implicit conversion from int to int8_t
Change the flag type to 'uint8_t' to fix the implicit conversion error.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Message-id: 20160810185502.32015-1-bobby.prani@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-15 16:15:38 +01:00
Aleksandar MarkovicandLeon Alrae c27644f0e9 softfloat: Handle snan_bit_is_one == 0 in MIPS pickNaNMulAdd()
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct the order of argument comparisons in pickNaNMulAdd().

For more info, see [1], page 53, section "3.5.3 NaN Propagation".

[1] "MIPS Architecture for Programmers Volume IV-j:
    The MIPS32 SIMD Architecture Module",
    Imagination Technologies LTD, Revision 1.12, February 3, 2016

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
 * reworded the subject of the patch
 * swapped if/else code blocks to match the commit description]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:32 +01:00
Aleksandar MarkovicandLeon Alrae a7c04d545a softfloat: For Mips only, correct default NaN values
Only for Mips platform, and only for cases when snan_bit_is_one is 0,
correct default NaN values (in their 16-, 32-, and 64-bit flavors).

For more info, see [1], page 84, Table 6.3 "Value Supplied When a New
Quiet NaN Is Created", and [2], page 52, Table 3.7 "Default NaN
Encodings".

[1] "MIPS Architecture For Programmers Volume II-A:
    The MIPS64 Instruction Set Reference Manual",
    Imagination Technologies LTD, Revision 6.04, November 13, 2015

[2] "MIPS Architecture for Programmers Volume IV-j:
    The MIPS32 SIMD Architecture Module",
    Imagination Technologies LTD, Revision 1.12, February 3, 2016

Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-24 13:41:31 +01:00