This patch collects comments and documentation changes from many commits
in the python-qemu-qmp repository; bringing the qemu.git copy in
bit-identical alignment with the standalone library *except* for several
copyright messages that reference the "LICENSE" file which is, for QEMU,
named "COPYING" instead and are therefore left unchanged.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit is two backports squashed into one to avoid regressions.
python: *really* remove get_event_loop
A prior commit, aa1ff990, switched away from using get_event_loop *by
default*, but this is not good enough to avoid deprecation warnings as
`asyncio.get_event_loop_policy().get_event_loop()` is *also*
deprecated. Replace this mechanism with explicit calls to
asyncio.get_new_loop() and revise the cleanup mechanisms in __del__ to
match.
python: avoid creating additional event loops per thread
"Too hasty by far!", commit 21ce2ee4 attempted to avoid deprecated
behavior altogether by calling new_event_loop() directly if there was no
loop currently running, but this has the unfortunate side effect of
potentially creating multiple event loops per thread if tests
instantiate multiple QMP connections in a single thread. This behavior
is apparently not well-defined and causes problems in some, but not all,
combinations of Python interpreter version and platform environment.
Partially revert to Daniel Berrange's original patch, which calls
get_event_loop and simply suppresses the deprecation warning in
Python<=3.13. This time, however, additionally register new loops
created with new_event_loop() so that future calls to get_event_loop()
will return the loop already created.
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@21ce2ee4f2df87efe84a27b9c5112487f4670622
cherry picked from commit python-qemu-qmp@c08fb82b38212956ccffc03fc6d015c3979f42fe
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This method was deprecated in 3.12 because it ordinarily should not be
used from coroutines; if there is not a currently running event loop,
this automatically creates a new event loop - which is usually not what
you want from code that would ever run in the bottom half.
In our case, we do want this behavior in two places:
(1) The synchronous shim, for convenience: this allows fully sync
programs to use QEMUMonitorProtocol() without needing to set up an event
loop beforehand. This is intentional to fully box in the async
complexities into the legacy sync shim.
(2) The qmp_tui shell; instead of relying on asyncio.run to create and
run an asyncio program, we need to be able to pass the current asyncio
loop to urwid setup functions. For convenience, again, we create one if
one is not present to simplify the creation of the TUI appliance.
The remaining user of get_event_loop() was in fact one of the erroneous
users that should not have been using this function: if there's no
running event loop inside of a coroutine, you're in big trouble :)
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@aa1ff9907603a3033296027e1bd021133df86ef1
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Based on the discussion at https://github.com/pypa/pip/issues/9726 -
even though the setuptools documentation implies that it is possible to
guard script execution with optional dependency groups, this is not true
in practice with the scripts generated by pip.
Just do the simple thing and guard the import statements.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@df520dcacf9a75dd4c82ab1129768de4128b554c
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@9c889dcbd58817b0c917a9d2dd16161f48ac8203
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This is not strictly needed functionality-wise, but doing this allows
sphinx to see which decorated methods are async. Without this, sphinx
misses the "async" classifier on generated docs, which ... for an async
library, isn't great.
It does make an already gnarly function even gnarlier, though.
So, what's going on here?
A synchronous function (like require() before this patch) can return a
coroutine that can be awaited on, for example:
def some_func():
return asyncio.task(asyncio.sleep(5))
async def some_async_func():
await some_func()
However, this function is not considered to be an "async" function in
the eyes of the abstract syntax tree. Specifically,
some_func.__code__.co_flags will not be set with CO_COROUTINE.
The interpreter uses this flag to know if it's legal to use "await" from
within the body of the function. Since this function is just wrapping
another function, it doesn't matter much for the decorator, but sphinx
uses the stdlib inspect.iscoroutinefunction() to determine when to add
the "async" prefix in generated output. This function uses the presence
of CO_COROUTINE.
So, in order to preserve the "async" flag for docs, the require()
decorator needs to differentiate based on whether it is decorating a
sync or async function and use a different wrapping mechanism
accordingly.
Phew.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@40aa9699d619849f528032aa456dd061a4afa957
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Expose the limit parameter of the underlying StreamReader and StreamWriter
instances.
This is helpful for the use case of transferring files in and out of a VM
via the QEMU guest agent's guest-file-open, guest-file-read, guest-file-write,
and guest-file-close methods, as it allows pushing the buffer size up to the
guest agent's limit of 48MB per transfer.
Signed-off-by: Adam Dorsey <adam@dorseys.email>
cherry picked from commit python-qemu-qmp@9ba6a698344eb3b570fa4864e906c54042824cd6
cherry picked from commit python-qemu-qmp@e4d0d3f835d82283ee0e48438d1b154e18303491
[Squashed in linter fixups. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@20a88c2471f37d10520b2409046d59e1d0f1e905
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a non-idiomatic use of a "coroutine callback" in favor of
something a bit more standardized.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@commit 97f7ffa3be17a50544b52767d14b6fd478c07b9e
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Now that the minimum version is 3.7, drop some of the 3.6-specific hacks
we've been carrying. A single remaining compatibility hack concerning
3.6's lack of @asynccontextmanager is addressed in the following commit.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@3e8e34e594cfc6b707e6f67959166acde4b421b8
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The client name is mutable, so the logging name should also change to
reflect it when it changes.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@e10b73c633ce138ba30bc8beccd2ab31989eaf3d
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This corrects an oversight in qmp-shell operation where new events will
not accumulate in the event queue when pressing "enter" with an empty
command buffer, so no new events show up.
Reported-by: Jag Raman <jag.raman@oracle.com>
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@0443582d16cf9efd52b2c41a7b5be7af42c856cd
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When the object is not stateful, this repr method prints what you'd
expect. In cases where there are pending events, the output is augmented
to illustrate that.
The object itself has no idea if it's "active" or not, so it cannot
convey that information.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@8a6f2e136dae395fec8aa5fd77487cfe12d9e05e
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By passing all of the arguments to the base class and overriding the
__str__ method when we want a different "human readable" message that
isn't just printing the list of arguments, we can ensure that all custom
error classes have a reasonable __repr__ implementation.
In the case of ExecuteError, the pseudo-field that isn't actually
correlated to an input argument can be re-imagined as a read-only
property; this forces consistency in the class and makes the repr output
more obviously correct.
Signed-off-by: John Snow <jsnow@redhat.com>
cherry picked from commit python-qemu-qmp@afdb7893f3b34212da4259b7202973f9a8cb85b3
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use a shorter name. We are going to move in iotests from qmp() to
command() where possible. But command() is longer than qmp() and don't
look better. Let's rename.
You can simply grep for '\.command(' and for 'def command(' to check
that everything is updated (command() in tests/docker/docker.py is
unrelated).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20231006154125.1068348-6-vsementsov@yandex-team.ru
[vsementsov: also update three occurrences in
tests/avocado/machine_aspeed.py and keep r-b]
Signed-off-by: John Snow <jsnow@redhat.com>
Having cmd() and command() methods in one class doesn't look good.
Rename cmd() to cmd_raw(), to show its meaning better.
We also want to rename command() to cmd() in future, so this commit is
a necessary step.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20231006154125.1068348-5-vsementsov@yandex-team.ru
Signed-off-by: John Snow <jsnow@redhat.com>
There are many Python 3.12 issues right now, but a particularly
problematic one when debugging them is that one cannot even use
minreqs.txt in a Python 3.12 virtual environment to test with
locked package versions.
Bump the mypy and wrapt versions to fix this, while remaining
within the realm of versions compatible with Python 3.7.
This requires a workaround for a mypy false positive
qemu/qmp/qmp_tui.py:350: error: Non-overlapping equality check (left operand type: "Literal[Runstate.DISCONNECTING]", right operand type: "Literal[Runstate.IDLE]") [comparison-overlap]
where mypy does not realize that self.disconnect() could change
the value of self.runstate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Favor using connect() when passing a socket instead of
open_with_socket(). Simultaneously, update constructor calls to use the
combined address argument for QEMUMonitorProtocol().
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20230517163406.2593480-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Allow existing sockets to be passed to connect(). The changes are pretty
minimal, and this allows for far greater flexibility in setting up
communications with an endpoint.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20230517163406.2593480-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Convert the qmp-spec.txt document to restructuredText.
Notable points about the conversion:
* numbers at the start of section headings are removed, to match
the style of the rest of the manual
* cross-references to other sections or documents are hyperlinked
* various formatting tweaks (notably the examples, which need the
-> and <- prefixed so the QMP code-block lexer will accept them)
* English prose fixed in a few places
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230515162245.3964307-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[.. code-block:: dumbed down to :: to work around CI failure]
John Snow
Adam DorseyandJohn Snow
Vladimir Sementsov-OgievskiyandJohn Snow
Paolo Bonzini
Peter MaydellandMarkus Armbruster