The user calling himself "John Doe" reported a deadlock when
attempting to use qemu-storage-daemon to serve both a base file over
NBD, and a qcow2 file with that NBD export as its backing file, from
the same process, even though it worked just fine when there were two
q-s-d processes. The bulk of the NBD server code properly uses
coroutines to make progress in an event-driven manner, but the code
for spawning a new coroutine at the point when listen(2) detects a new
client was hard-coded to use the global GMainContext; in other words,
the callback that triggers nbd_client_new to let the server start the
negotiation sequence with the client requires the main loop to be
making progress. However, the code for bdrv_open of a qcow2 image
with an NBD backing file uses an AIO_WAIT_WHILE nested event loop to
ensure that the entire qcow2 backing chain is either fully loaded or
rejected, without any side effects from the main loop causing unwanted
changes to the disk being loaded (in short, an AioContext represents
the set of actions that are known to be safe while handling block
layer I/O, while excluding any other pending actions in the global
main loop with potentially larger risk of unwanted side effects).
This creates a classic case of deadlock: the server can't progress to
the point of accept(2)ing the client to write to the NBD socket
because the main loop is being starved until the AIO_WAIT_WHILE
completes the bdrv_open, but the AIO_WAIT_WHILE can't progress because
it is blocked on the client coroutine stuck in a read() of the
expected magic number from the server side of the socket.
This patch adds a new API to allow clients to opt in to listening via
an AioContext rather than a GMainContext. This will allow NBD to fix
the deadlock by performing all actions during bdrv_open in the main
loop AioContext.
Technical debt warning: I would have loved to utilize a notify
function with AioContext to guarantee that we don't finalize listener
due to an object_unref if there is any callback still running (the way
GSource does), but wiring up notify functions into AioContext is a
bigger task that will be deferred to a later QEMU release. But for
solving the NBD deadlock, it is sufficient to note that the QMP
commands for enabling and disabling the NBD server are really the only
points where we want to change the listener's callback. Furthermore,
those commands are serviced in the main loop, which is the same
AioContext that is also listening for connections. Since a thread
cannot interrupt itself, we are ensured that at the point where we are
changing the watch, there are no callbacks active. This is NOT as
powerful as the GSource cross-thread safety, but sufficient for the
needs of today.
An upcoming patch will then add a unit test (kept separate to make it
easier to rearrange the series to demonstrate the deadlock without
this patch).
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/3169
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20251113011625.878876-26-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For ease of review, this patch adds an AioContext pointer to the
QIONetListener struct, the code to trace it, and refactors
listener->io_source to instead be an array of utility structs; but the
aio_context pointer is always NULL until the next patch adds an API to
set it. There should be no semantic change in this patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20251113011625.878876-25-eblake@redhat.com>
An upcoming patch needs to pass more than just sioc as the opaque
pointer to an AioContext; but since our AioContext code in general
(and its QIO Channel wrapper code) lacks a notify callback present
with GSource, we do not have the trivial option of just g_malloc'ing a
small struct to hold all that data coupled with a notify of g_free.
Instead, the data pointer must outlive the registered handler; in
fact, having the data pointer have the same lifetime as QIONetListener
is adequate.
But the cleanest way to stick such a helper struct in QIONetListener
will be to rearrange internal struct members. And that in turn means
that all existing code that currently directly accesses
listener->nsioc and listener->sioc[] should instead go through
accessor functions, to be immune to the upcoming struct layout
changes. So this patch adds accessor methods qio_net_listener_nsioc()
and qio_net_listener_sioc(), and puts them to use.
While at it, notice that the pattern of grabbing an sioc from the
listener only to turn around can call
qio_channel_socket_get_local_address is common enough to also warrant
the helper of qio_net_listener_get_local_address, and fix a copy-paste
error in the corresponding documentation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20251113011625.878876-24-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Without a mutex, NetListener can run into this data race between a
thread changing the async callback callback function to use when a
client connects, and the thread servicing polling of the listening
sockets:
Thread 1:
qio_net_listener_set_client_func(lstnr, f1, ...);
=> foreach sock: socket
=> object_ref(lstnr)
=> sock_src = qio_channel_socket_add_watch_source(sock, ...., lstnr, object_unref);
Thread 2:
poll()
=> event POLLIN on socket
=> ref(GSourceCallback)
=> if (lstnr->io_func) // while lstnr->io_func is f1
...interrupt..
Thread 1:
qio_net_listener_set_client_func(lstnr, f2, ...);
=> foreach sock: socket
=> g_source_unref(sock_src)
=> foreach sock: socket
=> object_ref(lstnr)
=> sock_src = qio_channel_socket_add_watch_source(sock, ...., lstnr, object_unref);
Thread 2:
=> call lstnr->io_func(lstnr->io_data) // now sees f2
=> return dispatch(sock)
=> unref(GSourceCallback)
=> destroy-notify
=> object_unref
Found by inspection; I did not spend the time trying to add sleeps or
execute under gdb to try and actually trigger the race in practice.
This is a SEGFAULT waiting to happen if f2 can become NULL because
thread 1 deregisters the user's callback while thread 2 is trying to
service the callback. Other messes are also theoretically possible,
such as running callback f1 with an opaque pointer that should only be
passed to f2 (if the client code were to use more than just a binary
choice between a single async function or NULL).
Mitigating factor: if the code that modifies the QIONetListener can
only be reached by the same thread that is executing the polling and
async callbacks, then we are not in a two-thread race documented above
(even though poll can see two clients trying to connect in the same
window of time, any changes made to the listener by the first async
callback will be completed before the thread moves on to the second
client). However, QEMU is complex enough that this is hard to
generically analyze. If QMP commands (like nbd-server-stop) are run
in the main loop and the listener uses the main loop, things should be
okay. But when a client uses an alternative GMainContext, or if
servicing a QMP command hands off to a coroutine to avoid blocking, I
am unable to state with certainty whether a given net listener can be
modified by a thread different from the polling thread running
callbacks.
At any rate, it is worth having the API be robust. To ensure that
modifying a NetListener can be safely done from any thread, add a
mutex that guarantees atomicity to all members of a listener object
related to callbacks. This problem has been present since
QIONetListener was introduced.
Note that this does NOT prevent the case of a second round of the
user's old async callback being invoked with the old opaque data, even
when the user has already tried to change the async callback during
the first async callback; it is only about ensuring that there is no
sharding (the eventual io_func(io_data) call that does get made will
correspond to a particular combination that the user had requested at
some point in time, and not be sharded to a combination that never
existed in practice). In other words, this patch maintains the status
quo that a user's async callback function already needs to be robust
to parallel clients landing in the same window of poll servicing, even
when only one client is desired, if that particular listener can be
amended in a thread other than the one doing the polling.
CC: qemu-stable@nongnu.org
Fixes: 53047392 ("io: introduce a network socket listener API", v2.12.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-ID: <20251113011625.878876-20-eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[eblake: minor commit message wording improvements]
Signed-off-by: Eric Blake <eblake@redhat.com>
io/net-listener.c has two modes of use: asynchronous (the user calls
qio_net_listener_set_client_func to wake up the callback via the
global GMainContext, or qio_net_listener_set_client_func_full to wake
up the callback via the caller's own alternative GMainContext), and
synchronous (the user calls qio_net_listener_wait_client which creates
its own GMainContext and waits for the first client connection before
returning, with no need for a user's callback). But commit 938c8b79
has a latent logic flaw: when qio_net_listener_wait_client finishes on
its temporary context, it reverts all of the siocs back to the global
GMainContext rather than the potentially non-NULL context they might
have been originally registered with. Similarly, if the user creates
a net-listener, adds initial addresses, registers an async callback
with a non-default context (which ties to all siocs for the initial
addresses), then adds more addresses with qio_net_listener_add, the
siocs for later addresses are blindly placed in the global context,
rather than sharing the context of the earlier ones.
In practice, I don't think this has caused issues. As pointed out by
the original commit, all async callers prior to that commit were
already okay with the NULL default context; and the typical usage
pattern is to first add ALL the addresses the listener will pay
attention to before ever setting the async callback. Likewise, if a
file uses only qio_net_listener_set_client_func instead of
qio_net_listener_set_client_func_full, then it is never using a custom
context, so later assignments of async callbacks will still be to the
same global context as earlier ones. Meanwhile, any callers that want
to do the sync operation to grab the first client are unlikely to
register an async callback; altogether bypassing the question of
whether later assignments of a GSource are being tied to a different
context over time.
I do note that chardev/char-socket.c is the only file that calls both
qio_net_listener_wait_client (sync for a single client in
tcp_chr_accept_server_sync), and qio_net_listener_set_client_func_full
(several places, all with chr->gcontext, but sometimes with a NULL
callback function during teardown). But as far as I can tell, the two
uses are mutually exclusive, based on the is_waitconnect parameter to
qmp_chardev_open_socket_server.
That said, it is more robust to remember when an async callback
function is tied to a non-default context, and have both the sync wait
and any late address additions honor that same context. That way, the
code will be robust even if a later user performs a sync wait for a
specific client in the middle of servicing a longer-lived
QIONetListener that has an async callback for all other clients.
CC: qemu-stable@nongnu.org
Fixes: 938c8b79 ("qio: store gsources for net listeners", v2.12.0)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20251113011625.878876-19-eblake@redhat.com>
mem + migration pull for 10.2
- Fabiano's patch to fix snapshot crash by rejecting some caps
- Marco's mapped-ram support on snapshot save/load
- Steve's cpr maintainers entry update on retirement
- Peter's coverity fixes
- Chenyi's tdx fix on hugetlbfs regression
- Peter's doc update on migrate resume flag
- Peter's doc update on HMP set parameter for cpr-exec-command's char** parsing
- Xiaoyao's guest-memfd fix for enabling shmem
- Arun's fix on error_fatal regression for migration errors
- Bin's fix on redundant error free for add block failures
- Markus's cleanup around MigMode sets
- Peter's two patches (out of loadvm threadify) to cleanup qio read peek process
- Thomas's vmstate-static-checker update for possible deprecation of argparse use
- Stefan's fix on windows deadlock by making unassigned MMIOs lockless
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCaQkZPBIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wZhTgEA8eCBMpM7PusNSdzzeIygKnIp2A8I70ca
# eIJz3ZM+FiUBAPVDrIZ59EhZA6NPcJb8Ya9OY4lT63F4BxrvN+f+uG4N
# =GUBi
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 03 Nov 2025 10:06:04 PM CET
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [unknown]
# gpg: aka "Peter Xu <peterx@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'staging-pull-request' of https://gitlab.com/peterx/qemu: (36 commits)
migration: Introduce POSTCOPY_DEVICE state
migration: Make postcopy listen thread joinable
migration: Respect exit-on-error when migration fails before resuming
migration: Refactor all incoming cleanup info migration_incoming_destroy()
migration: Introduce postcopy incoming setup and cleanup functions
migration: Move postcopy_ram_listen_thread() to postcopy-ram.c
migration: Do not try to start VM if disk activation fails
migration: Flush migration channel after sending data of CMD_PACKAGED
system/physmem: mark io_mem_unassigned lockless
scripts/vmstate-static-checker: Fix deprecation warnings with latest argparse
migration: vmsd errp handlers: return bool
migration/vmstate: stop reporting error number for new _errp APIs
tmp_emulator: improve and fix use of errp
migration: vmstate_save_state_v(): fix error path
migration: Properly wait on G_IO_IN when peeking messages
io: Add qio_channel_wait_cond() helper
migration: Put Error **errp parameter last
migration: Use bitset of MigMode instead of variable arguments
migration: Use unsigned instead of int for bit set of MigMode
migration: Don't free the reason after calling migrate_add_blocker
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The kernel allocates extra metadata SKBs in case of a zerocopy send,
eventually used for zerocopy's notification mechanism. This metadata
memory is accounted for in the OPTMEM limit. The kernel queues
completion notifications on the socket error queue and this error queue
is freed when userspace reads it.
Usually, in the case of in-order processing, the kernel will batch the
notifications and merge the metadata into a single SKB and free the
rest. As a result, it never exceeds the OPTMEM limit. However, if there
is any out-of-order processing or intermittent zerocopy failures, this
error chain can grow significantly, exhausting the OPTMEM limit. As a
result, all new sendmsg requests fail to allocate any new SKB, leading
to an ENOBUF error. Depending on the amount of data queued before the
flush (i.e., large live migration iterations), even large OPTMEM limits
are prone to failure.
To work around this, if we encounter an ENOBUF error with a zerocopy
sendmsg, flush the error queue and retry once more.
Co-authored-by: Manish Mishra <manish.mishra@nutanix.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[DB: change TRUE/FALSE to true/false for 'bool' type;
add more #ifdef QEMU_MSG_ZEROCOPY blocks]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add a 'blocking' boolean field to QIOChannelSocket to track whether the
underlying socket is in blocking or non-blocking mode.
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I/O channel read/write functions can operate on any area of
memory, regardless of the content their represent. Do not
restrict to array of char, use the void* type, which is also
the type of the underlying iovec::iov_base field.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[DB: also adapt test-crypto-tlssession.c func signatures]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If the QIOChannelWebsock object is freed while it is waiting to
complete a handshake, a GSource is leaked. This can lead to the
callback firing later on and triggering a use-after-free in the
use of the channel. This was observed in the VNC server with the
following trace from valgrind:
==2523108== Invalid read of size 4
==2523108== at 0x4054A24: vnc_disconnect_start (vnc.c:1296)
==2523108== by 0x4054A24: vnc_client_error (vnc.c:1392)
==2523108== by 0x4068A09: vncws_handshake_done (vnc-ws.c:105)
==2523108== by 0x44863B4: qio_task_complete (task.c:197)
==2523108== by 0x448343D: qio_channel_websock_handshake_io (channel-websock.c:588)
==2523108== by 0x6EDB862: UnknownInlinedFun (gmain.c:3398)
==2523108== by 0x6EDB862: g_main_context_dispatch_unlocked.lto_priv.0 (gmain.c:4249)
==2523108== by 0x6EDBAE4: g_main_context_dispatch (gmain.c:4237)
==2523108== by 0x45EC79F: glib_pollfds_poll (main-loop.c:287)
==2523108== by 0x45EC79F: os_host_main_loop_wait (main-loop.c:310)
==2523108== by 0x45EC79F: main_loop_wait (main-loop.c:589)
==2523108== by 0x423A56D: qemu_main_loop (runstate.c:835)
==2523108== by 0x454F300: qemu_default_main (main.c:37)
==2523108== by 0x73D6574: (below main) (libc_start_call_main.h:58)
==2523108== Address 0x57a6e0dc is 28 bytes inside a block of size 103,608 free'd
==2523108== at 0x5F2FE43: free (vg_replace_malloc.c:989)
==2523108== by 0x6EDC444: g_free (gmem.c:208)
==2523108== by 0x4053F23: vnc_update_client (vnc.c:1153)
==2523108== by 0x4053F23: vnc_refresh (vnc.c:3225)
==2523108== by 0x4042881: dpy_refresh (console.c:880)
==2523108== by 0x4042881: gui_update (console.c:90)
==2523108== by 0x45EFA1B: timerlist_run_timers.part.0 (qemu-timer.c:562)
==2523108== by 0x45EFC8F: timerlist_run_timers (qemu-timer.c:495)
==2523108== by 0x45EFC8F: qemu_clock_run_timers (qemu-timer.c:576)
==2523108== by 0x45EFC8F: qemu_clock_run_all_timers (qemu-timer.c:663)
==2523108== by 0x45EC765: main_loop_wait (main-loop.c:600)
==2523108== by 0x423A56D: qemu_main_loop (runstate.c:835)
==2523108== by 0x454F300: qemu_default_main (main.c:37)
==2523108== by 0x73D6574: (below main) (libc_start_call_main.h:58)
==2523108== Block was alloc'd at
==2523108== at 0x5F343F3: calloc (vg_replace_malloc.c:1675)
==2523108== by 0x6EE2F81: g_malloc0 (gmem.c:133)
==2523108== by 0x4057DA3: vnc_connect (vnc.c:3245)
==2523108== by 0x448591B: qio_net_listener_channel_func (net-listener.c:54)
==2523108== by 0x6EDB862: UnknownInlinedFun (gmain.c:3398)
==2523108== by 0x6EDB862: g_main_context_dispatch_unlocked.lto_priv.0 (gmain.c:4249)
==2523108== by 0x6EDBAE4: g_main_context_dispatch (gmain.c:4237)
==2523108== by 0x45EC79F: glib_pollfds_poll (main-loop.c:287)
==2523108== by 0x45EC79F: os_host_main_loop_wait (main-loop.c:310)
==2523108== by 0x45EC79F: main_loop_wait (main-loop.c:589)
==2523108== by 0x423A56D: qemu_main_loop (runstate.c:835)
==2523108== by 0x454F300: qemu_default_main (main.c:37)
==2523108== by 0x73D6574: (below main) (libc_start_call_main.h:58)
==2523108==
The above can be reproduced by launching QEMU with
$ qemu-system-x86_64 -vnc localhost:0,websocket=5700
and then repeatedly running:
for i in {1..100}; do
(echo -n "GET / HTTP/1.1" && sleep 0.05) | nc -w 1 localhost 5700 &
done
CVE-2025-11234
Reported-by: Grant Millar | Cylo <rid@cylo.io>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We want to switch from qemu_socket_set_block() to newer
qemu_set_blocking(), which provides return status of operation,
to handle errors.
Still, we want to keep qio_channel_socket_readv() interface clean,
as currently it allocate @fds only on success.
So, in case of error, we should close all incoming fds and keep
user's @fds untouched or zero.
Let's make separate functions qio_channel_handle_fds() and
qio_channel_cleanup_fds(), to achieve what we want.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, we just always pass NULL as errp argument. That doesn't
look good.
Some realizations of interface may actually report errors.
Channel-socket realization actually either ignore or crash on
errors, but we are going to straighten it out to always reporting
an errp in further commits.
So, convert all callers to either handle the error (where environment
allows) or explicitly use &error_abort.
Take also a chance to change the return value to more convenient
bool (keeping also in mind, that underlying realizations may
return -1 on failure, not -errno).
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
[DB: fix return type mismatch in TLS/websocket channel
impls for qio_channel_set_blocking]
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The only realization, which may have incoming fds is
qio_channel_socket_readv() (in io/channel-socket.c).
qio_channel_socket_readv() do call (through
qio_channel_socket_copy_fds()) qemu_socket_set_block() and
qemu_set_cloexec() for each fd.
Also, qio_channel_socket_copy_fds() is called at the end of
qio_channel_socket_readv(), on success path.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In migration we want to pass fd "as is", not changing its
blocking status.
The only current user of these fds is CPR state (through VMSTATE_FD),
which of-course doesn't want to modify fds on target when source is
still running and use these fds.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Testing reading and writing from qemu-nbd using a unix domain socket
shows that the platform default send buffer size is too low, leading to
poor performance and hight cpu usage.
Add a helper for setting socket send buffer size to be used in NBD code.
It can also be used in other contexts.
We don't need a helper for receive buffer size since it is not used with
unix domain sockets. This is documented for Linux, and not documented
for macOS.
Failing to set the socket buffer size is not a fatal error, but the
caller may want to warn about the failure.
Signed-off-by: Nir Soffer <nirsof@gmail.com>
Message-ID: <20250517201154.88456-2-nirsof@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a read flag that can inform a channel that it's ok to receive an
EOF at any moment. Channels that have some form of strict EOF
tracking, such as TLS session termination, may choose to ignore EOF
errors with the use of this flag.
This is being added for compatibility with older migration streams
that do not include a TLS termination step.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
We want to pass flags into qio_channel_tls_readv() but
qio_channel_readv_full_all_eof() doesn't take a flags argument.
No functional change.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Add a task dispatcher for gnutls_bye similar to the
qio_channel_tls_handshake_task(). The gnutls_bye() call might be
interrupted and so it needs to be rescheduled.
The migration code will make use of this to help the migration
destination identify a premature EOF. Once the session termination is
in place, any EOF that happens before the source issued gnutls_bye()
will be considered an error.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
The function qio_channel_get_peercred() returns a pointer to the
credentials of the peer process connected to this socket.
This credentials structure is defined in <sys/socket.h> as follows:
struct ucred {
pid_t pid; /* Process ID of the sending process */
uid_t uid; /* User ID of the sending process */
gid_t gid; /* Group ID of the sending process */
};
The use of this function is possible only for connected AF_UNIX stream
sockets and for AF_UNIX stream and datagram socket pairs.
On platform other than Linux, the function return 0.
Signed-off-by: Anthony Harivel <aharivel@redhat.com>
Link: https://lore.kernel.org/r/20240522153453.1230389-2-aharivel@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
