msix_init() and msix_init_exclusive_bar() take an "unsigned short"
argument for the number of MSI-X vectors to try to use. This is big
enough for the maximum permitted number of vectors, which is 2048.
Unfortunately, we have several devices (most notably virtio) which
allow the user to specify the desired number of vectors, and which
use uint32_t properties for this. If the user sets the property to a
value that is too big for a uint16_t, the value will be truncated
when it is passed to msix_init(), and msix_init() may then return
success if the truncated value is a valid one.
The resulting mismatch between the number of vectors the msix code
thinks the device has and the number of vectors the device itself
thinks it has can cause assertions, such as the one in issue 2631,
where "-device virtio-mouse-pci,vectors=19923041" is interpreted by
msix as "97 vectors" and by the virtio-pci layer as "19923041
vectors"; a guest attempt to access vector 97 thus passes the
virtio-pci bounds checking and hits an essertion in
msix_vector_use().
Avoid this by making msix_init() and its wrapper function
msix_init_exclusive_bar() take the number of vectors as a uint32_t.
The erroneous command line will now produce the warning
qemu-system-i386: -device virtio-mouse-pci,vectors=19923041:
warning: unable to init msix vectors to 19923041
and proceed without crashing. (The virtio device warns and falls
back to not using MSIX, rather than complaining that the option is
not a valid value this is the same as the existing behaviour for
values that are beyond the MSI-X maximum possible value but fit into
a 16-bit integer, like 2049.)
To ensure this doesn't result in potential overflows in calculation
of the BAR size in msix_init_exclusive_bar(), we duplicate the
nentries error-check from msix_init() at the top of
msix_init_exclusive_bar(), so we know nentries is sane before we
start using it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2631
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251107131044.1321637-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Adds a new entry VTDPASIDCacheEntry in VTDAddressSpace to cache the pasid
entry and track PASID usage and future PASID tagged DMA address translation
support in vIOMMU.
When guest triggers pasid cache invalidation, QEMU will capture it and
update or invalidate pasid cache.
vIOMMU emulator could figure out the reason by fetching latest guest pasid
entry in memory and compare it with cached PASID entry if it's valid.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20251017093602.525338-2-zhenzhong.duan@intel.com>
Misc HW patches
- Add RPMB emulation to eMMC model
- Use generic MachineState::fdt field in microvm machine
- Remove dead code in ac97_realize()
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmkLEUMACgkQ4+MsLN6t
# wN4yURAAuiQPYC6rcPbjCI1RZ5iPyrajH1iKW6HSV6nMWHap1vjL8hUnrfDu1GRH
# uCyf8ExMkPWemNJW1WcxMN19Gie/J42PfKv7ggHTVoEQwg70DLmKBUcFBbsPfLy7
# 7NJ9qNnyZANNgBlvywZRPxs3v+3WEgqa6NEjpWqS5ivIEQjW4bxGa6yJ6LmJq1UY
# YpdSuK/9tsdPcDnc0b95cEBOZa7y8tjr8gtxCAraPwY+elaM9EYDwB8Mrg84RWiN
# zeeiCt1PL/Hc9qRiZral2MsWGtfefeOPGCir0jawaYl7UfbLi/0EXvpHJbMTl626
# MjilMlUi23aUbn1cuxygA1NV3sy+yRpZtxrpfJTOhoo7WZUBnn0atcH6GKMH2AM0
# S/thR6c1ArUck8d8ABUBESskmZpZQFPGXLcW+XCi8SOP/HwmtT/0L+OlexQPLAep
# nqu/T/yXer2C4sUHB2iwK7DrF7Dl2bzhdRZhyTEtIYuT4dC0FDVv9bwdgna/xWj3
# Re0HPT5J9o0tzQ2QaGMwPkjepf+LH1z3ntXhgJstr0D5G2wJ8+g1ZlPFKgrvBsCj
# C/YWZ3og31THAIb12exxaF4mHUF4fBrerQHg4E93MPhz1403D+sqJDxOUaC/PRJB
# OWwBCkWsWE8tjLie+1igNWKKB0N4ZTNKTGu0yxXFbcocu9LO6r0=
# =X6wb
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Nov 2025 09:56:35 AM CET
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'hw-misc-20251104' of https://github.com/philmd/qemu:
hw/audio: Remove dead code from ac97_realize
hw/i386/microvm: Use fdt field from MachineState
docs: Add eMMC device model description
scripts: Add helper script to generate eMMC block device images
hw/sd/sdcard: Handle RPMB MAC field
hw/sd/sdcard: Add basic support for RPMB partition
hw/sd/sdcard: Allow user creation of eMMCs
hw/sd/sdcard: Fix size check for backing block image
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
LASI i82596 network driver fixes
As part of the Google Summer of Code 2025 program "Implementing LASI Network
Card and NCR 710 SCSI Controller Device Models" Soumyajyotii Ssarkar fixed
various bugs and enhanced the existing Qemu i82596 network card implementation.
Specifically he added or fixed the following functionality:
- Monitor Mode
- Promiscuous Mode
- Support for linear mode, segmented mode, and flexible memory models
- RX Timer
- Bus Throttle Timers
- Support for Little Endian mode
- Accurate CU and RU transition State
- HP-UX Specific Behavior Support
- Support for Loopback mode
- Self test
- Statistical counters
- VMstate descriptors
- Polling mechanism
- Transmit and Receive functions
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaQoaFAAKCRD3ErUQojoP
# X/JLAP4mXjeN9G2F8xXEnCKDPoGFc16eQ/VjZJgh650KEHAO+gD/ZzSEeeoHGpp+
# Kg0/FrKY4u1TpZCq9RYKWjoDTjrzSAc=
# =26cF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Nov 2025 04:21:56 PM CET
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'i82596-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
i82596: Implement enhanced TX/RX with packet queuing and filtering
i82596: Added core infrastructure and helper functions
hw/hppa: Enable LASI i82596 network on 715 machine
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
MachineState already provides an fdt field, remove it from
MicrovmMachineState and use that instead.
This is useful when using the `dumpdtb` option, as QEMU expects the
device tree to be stored in the MachineState struct, otherwise it
will return this error:
qemu-system-x86_64: This machine doesn't have an FDT
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20251030-fix_microvm-v1-1-f89544a04be3@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
aspeed queue:
* Move Aspeed machine models in separate source files to ease maintenance
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmkJudUACgkQUaNDx8/7
# 7KFbOA/8CXCx6LMxs0F4ICUsX/HlmSi8n4oeR9bTar+Di/1wJBZsngVXmFIUq+g9
# i28QJiDKKPaGIbFkKfa/Ndd9vybnQNv9zdA7nbvJ/A9kRzIz3bzBtICwa1rUzwcb
# CeIzAAxLpBUHCwC9MDSe0PbCaCr/Fa1AsQrKrflLtbsDPtLdChwrNAJYD0N3Jih9
# Gh94nRQqy6VEv1bn0bUCxMgWbPVMm+ZAblUK0SN9asr2ZFl180Fec7kmHUKKhbUV
# WaNJM3qu7D15ShsrciarNLEgDQQGDKA/FemscAp41J5Ot1qymgBDS02MaNbFkBaZ
# 43xEh2o1a8pM4fELvawJoeCnODF9+EXYMiC6KTy4gk8T06U1d67AqQDgtmaAW9/T
# Mu79tXyYhygW3eFzvenOviPPmZCRPxeU9HerIZtb82EUJ1Os/ztctobZNdamMnue
# QMjUFfi1FUdvvsonx3kMVVCUsV3ZlSD7aAC3BR+tCe7b2hGeFEFXePUVO/HWSJGJ
# 3e92Wp11QKR9iXFK+g9910mPbNz+AMSw5C/GZIQf9TnGID+PrCTFTAaCW0D18Cvo
# A1zr1OZ8gJRz2hDRYVfDzykvWR7Y8IFdEPPeMzK9VAuv+Draiv1pNQ7bkqmf3m39
# rIV/oFOILQVEdnaQdc/q/cqWjSevptL+kt+Le+5qf0kbrJEOJY0=
# =nxN9
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 04 Nov 2025 09:31:17 AM CET
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [full]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [full]
* tag 'pull-aspeed-20251104' of https://github.com/legoater/qemu: (30 commits)
hw/arm/aspeed: Split AST1030 EVB machine into a separate source file for maintainability
hw/arm/aspeed: Rename and export connect_serial_hds_to_uarts() as aspeed_connect_serial_hds_to_uarts()
hw/arm/aspeed: Split AST2700 EVB machine into a separate source file for maintainability
hw/arm/aspeed: Split AST2600 EVB machine into a separate source file for maintainability
hw/arm/aspeed: Split Catalina machine into a separate source file for maintainability
hw/arm/aspeed: Split Rainier machine into a separate source file for maintainability
hw/arm/aspeed: Split GB200NVL machine into a separate source file for maintainability
hw/arm/aspeed: Make aspeed_machine_ast2600_class_emmc_init() a common API for eMMC boot setup
hw/arm/aspeed: Split QCOM DC-SCM V1 machine into a separate source file for maintainability
hw/arm/aspeed: Split QCOM Firework machine into a separate source file for maintainability
hw/arm/aspeed: Split Fuji machine into a separate source file for maintainability
hw/arm/aspeed: Split FBY35 BMC machine into a separate source file for maintainability
hw/arm/aspeed: Split Bletchley machine into a separate source file for maintainability
hw/arm/aspeed: Move ASPEED_RAM_SIZE() macro to common header for reuse
hw/arm/aspeed: Split Palmetto machine into a separate source file for maintainability
hw/arm/aspeed: Split Supermicro X11 machine into a separate source file for maintainability
hw/arm/aspeed: Split Quanta-Q71L machine into a separate source file for maintainability
hw/arm/aspeed: Split AST2500 EVB machine into a separate source file for maintainability
hw/arm/aspeed: Split Supermicro X11SPI machine into a separate file for maintainability
hw/arm/aspeed: Split Romulus machine into a separate source file for maintainability
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Enable the i82596 network chip which is included in the LASI
multi I/O chip. Since LASI has different start addresses on
the various machines, always initialize the LASI components
by their offsets.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Soumyajyotii Ssarkar <soumyajyotisarkar23@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The helper function connect_serial_hds_to_uarts() has been renamed to
aspeed_connect_serial_hds_to_uarts() and promoted to a public Aspeed
machine API.
Previously, this function was declared static within aspeed.c and only
used internally. Renaming it with the aspeed_ prefix and exporting its
declaration in aspeed.h makes the function accessible to other Aspeed
machine implementations that need to attach host serial devices to SoC
UARTs.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-30-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This commit exposes the function aspeed_machine_ast2600_class_emmc_init() as
a common API so that other AST2600-based machine implementations can reuse it
to enable the "boot-emmc" property.
Previously, this function was defined as a static helper within aspeed.c,
limiting its visibility to that file. By making it global and declaring it in
aspeed.h, other machine definition files (e.g., for specific AST2600 boards)
can now easily call this API to register eMMC boot configuration support.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-24-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The helper function create_pca9554() has been renamed to
aspeed_create_pca9554() and made globally available.
Previously, the function was declared static inside aspeed.c, restricting
its visibility to that file. As more Aspeed machine implementations
require PCA9554 I2C expander setup, it makes sense to rename it with the
aspeed_ prefix and export its declaration in aspeed.h for shared use.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The helper function create_pca9552() has been renamed to
aspeed_create_pca9552() and made non-static for reuse by other Aspeed
machine source files. A corresponding prototype is now declared in
aspeed.h.
This allows multiple Aspeed platforms to share PCA9552 I2C LED controller
initialization logic, improving code reuse and reducing duplication.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The function aspeed_machine_class_init_cpus_defaults() is now made
globally visible so that it can be used by other Aspeed machine C files.
Previously, this function was declared as static, restricting its
visibility to aspeed.c. Since future machine split files will also
need to call this helper to initialize default CPU settings, its
declaration has been moved to the common header aspeed.h and the
static keyword has been removed.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Aspeed machines will be moved into split C files for better
modularization and future maintenance.
To allow all machine implementations to reuse the same
AspeedMachineState structure, the struct definition is moved
from aspeed.c to the shared header aspeed.h.
This change centralizes the common state structure used across
all Aspeed machine models, reduces redundancy, and simplifies
future refactoring work for new machines.
No functional changes.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20251104031325.146374-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Audio clean-ups
# -----BEGIN PGP SIGNATURE-----
#
# iQJQBAABCgA6FiEEh6m9kz+HxgbSdvYt2ujhCXWWnOUFAmkEWqwcHG1hcmNhbmRy
# ZS5sdXJlYXVAcmVkaGF0LmNvbQAKCRDa6OEJdZac5a4RD/49KcP8h/5+QT3nu703
# OL/c/+M0DEZCVikzbj1T+nZNlUZtto/wE1vY0/xxzoyMh/4XbUFI0b/YK8WcQyUx
# ozrWOCi6TquS1QpR62FBmDJ6QDA2KteTF8Zq/owdFj+l7VJ5F5mzcuuFCxLx1EVH
# 7qOIf37Vk4r8jz42CLRTusPGQZLSvS8LbTBP62guauXlVAKVWI8k9macRSqoTBRo
# VrQO3QC/JFSqkB2jGfes8AMU+RWLYPG3ICCf0UYHH/kMik/JEL+1arx7au7oukTb
# 3kp8cxGnuJzBKCvY8SLwQF3YiCotYQIjSkvAQrMYBXalPBjQIIh+vzegcF1D+xZb
# 6KR4kh3oXPHtVCG2AXcxA4IuAi50jYFPn6TgDkRrUAEhsOqOxLo5bmZsqWK7L3/u
# 61jLKSjLRSc+NjhwHN0YVy1ocdsLf2z1LQNHjC1TuxrgI//9fQnOE2gASb8tmJGg
# BlPYp5h6G50IEaACzlZEtudWpKRb/XyflWpHbWte0VUO9dpz/cUvO1P38CpPD1dr
# ohENb8eLn0L23M12tUABV0IoA729phBYh3Eua9uIzEVfuRVfoPCuocx6VxQked91
# SZr7X9G80Nyh5YYiMlrwpN8eDgPtKfW5JwI2wYME6clGLnf/catkqCl/qp4nQeG5
# LPZiFy5Krz+QuSq41DjcSWRD+g==
# =qTgA
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 31 Oct 2025 07:43:56 AM CET
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [unknown]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* tag 'audio-test-pull-request' of https://gitlab.com/marcandre.lureau/qemu: (36 commits)
audio: deprecate HMP audio commands
audio: Rename @endianness argument as @big_endian for clarity
audio: Remove pointless local variables
audio: drop needless audio_driver "descr" field
audio: move capture API to own header
audio: cleanup, use bool for booleans
audio: remove dependency on spice header
audio: move audio.h under include/qemu/
audio/dbus: use a helper function to set the backend dbus server
audio: remove QEMUSoundCard
audio: rename AudioState -> AudioBackend
audio: move internal APIs to audio_int.h
audio/replay: fix type punning
audio: introduce AUD_set_volume_{in,out}_lr()
audio: remove AUDIO_HOST_ENDIANNESS
audio: remove some needless headers
audio: initialize card_head during object init
audio: register and unregister vmstate with AudioState
audio: keep vmstate handle with AudioState
audio: drop needless error message
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ppc queue for 10.2
* Firmware updates for SLOF, sam460ex u-boot
* Removal of unusable e200 CPUs
* Coverity fixes for fadump
* Other minor fixes, cleanups for pegasos, spapr.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEa4EM1tK+EPOIPSFCRUTplPnWj7sFAmkDH0MACgkQRUTplPnW
# j7tRjQ/+JbtHt8v4liav4EXRMvM0b8ASDQZFtltC8cg/vpgy/CbYgqcltQDKC4+F
# NjBwSR4mKMTLX95LQsdFCLZY6FENKCirjpsCvHDxU9Hw/UdsVA12rFd/+lgytrTe
# yvJzyhUAoUMSFgpYGZSRQVV+eMEMgHBZekR2RLXwEeuLf/TOAdG+giCMM92Xs7bz
# petdqCspKvpw8RHjb2nyIh67RQ3zYVisU9/pczoNRytjQHYgllddXRt1/DOdF/Gi
# zREc7qE3biDg5jYgWScByy6EwBBBPqNbvR1GLjMV2rM77785KD9GsIzKCCzg6YQY
# CSN/fy8V4TXVkJn8nY2s3SHvBz3szNSvx/nL8sCyKXol/5Naha5CLN0ykz5VcrIf
# 9gNwifW22lHbAtvbmRY9yuTrao8RoQwEZ/3o8Te3W/U9iCFLnwCmKWb/3GT6i/kw
# yyJlUBuW5WASf5N+G0N7IB5BAwzoQQtd0WXW1ugXAFG+Bd/nkRvVkIf9sPWUxWJ/
# 0Tx+2rPZOFzju8VYO8188wh/zDLuNRTEdfo+L21GMI2OBBEUO2nIiwPTLIMrCT4e
# ycC7Vvyu3IahX9ojIL9g0RhPH4K4JDbQuDnszp9SBGcgJYzwLh5Hb436A30A6qJE
# 7r5FTCiwtG27eMKCeZU3iBGpcj+g4kWIvmYEITsyCl8CxKv5+fs=
# =fzVo
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Oct 2025 09:18:11 AM CET
# gpg: using RSA key 6B810CD6D2BE10F3883D21424544E994F9D68FBB
# gpg: Good signature from "Harsh Prateek Bora <harsh.prateek.bora@gmail.com>" [undefined]
# gpg: aka "Harsh Prateek Bora <harshpb@linux.ibm.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6B81 0CD6 D2BE 10F3 883D 2142 4544 E994 F9D6 8FBB
* tag 'pull-ppc-for-10.2-d4-20251030' of https://gitlab.com/harshpb/qemu:
hw/ppc/pegasos: Update documentation for pegasos1
hw/ppc/pegasos2: Rename to pegasos
hw/ppc/pegasos2: Add /chosen/stdin node with VOF
hw/ppc: Fix memory leak in get_cpu_state_data()
hw/ppc: Fix missing return on allocation failure
ppc/spapr: Cleanup MSI IRQ number handling
target/ppc: Remove the unusable e200 CPUs
target/ppc/cpu_init: Simplify the setup of the TLBxCFG SPR registers
hw/ppc/sam460ex: Update u-boot-sam460ex
pseries: Update SLOF firmware image to release 20251027
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
