Implement correct OTP programming behavior for Aspeed OTP:
- Support read-modify-write flow with one-way bit programming:
* prog_bit uses 0s as the "to-be-programmed" mask.
* Even-indexed words: 0->1, odd-indexed words: 1->0.
* Reject non-programmable requests and log conflicts.
- Enable unaligned accesses in MemoryRegionOps.
Since each OTP address maps to a 1DW (4B) or 2DW (8B) block in the
backing store, upper-layer accesses may be unaligned to block
boundaries.
This matches the irreversible, word-parity-dependent programming rules
of Aspeed SoCs and exposes changes via QEMU trace events.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-6-kane_chen@aspeedtech.com
[ clg: Fixed PRIx64 format in aspeed_otp_write() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch introduces a 'drive' property to the Aspeed OTP device,
allowing it to be backed by a block device. Users can now preload
OTP data via QEMU CLI using a block backend.
Example usage:
./qemu-system-arm \
-blockdev driver=file,filename=otpmem.img,node-name=otp \
-global aspeed-otp.drive=otp \
...
If the drive is provided, its content will be loaded as the initial OTP
state. Otherwise, an internal memory buffer will be used.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-5-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Introduce a QEMU device model for ASPEED's One-Time Programmable (OTP)
memory.
This model simulates a word-addressable OTP region used for secure
fuse storage. The OTP memory can operate with an internal memory
buffer.
The OTP model provides a memory-like interface through a dedicated
AddressSpace, allowing other device models (e.g., SBC) to issue
transactions as if accessing a memory-mapped region.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-2-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The MachineClass::legacy_fw_cfg_order boolean was only used
by the pc-q35-2.5 and pc-i440fx-2.5 machines, which got
removed. Remove it along with:
- FW_CFG_ORDER_OVERRIDE_* definitions
- fw_cfg_set_order_override()
- fw_cfg_reset_order_override()
- fw_cfg_order[]
- rom_set_order_override()
- rom_reset_order_override()
Simplify CLI and pc_vga_init() / pc_nic_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20250512083948.39294-12-philmd@linaro.org>
[thuth: Fix error from check_patch.pl wrt to an empty "for" loop]
Signed-off-by: Thomas Huth <thuth@redhat.com>
PropertyInfo member @name becomes ObjectProperty member @type, while
Property member @name becomes ObjectProperty member @name. Rename the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[One missed instance of @type fixed]
The init_rom[] can write values to the beginning of the memory but
these are overwritten by values from a backing file that covers the
whole memory.
init_rom[] is used only if there's no backing file (provides default
content) but should not overwrite backing file content (especially
leaving the file unchanged and only change it in memory).
Do the init_rom[] handling only if it would not be overwritten.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <fd8e0478febd60d5f48c58bc77c60e043d1c3cdc.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Calling memset to zero memory is not needed after g_malloc0 which
already clears memory. These used to be in separate functions but
after some patches the memset ended up after g_malloc0 and thus can be
dropped.
Fixes: 4f2c6448c3 (hw/nvram/eeprom_at24c: Make reset behavior more like hardware)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <ff281851e6d824ecd01b8b5cd955328dae1515a0.1740839457.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
On arm/virt platform, Chen Xiang reported a Guest crash while
attempting the below steps,
1. Launch the Guest with nvdimm=on
2. Hot-add a NVDIMM dev
3. Reboot
4. Guest boots fine.
5. Reboot again.
6. Guest boot fails.
QEMU_EFI reports the below error:
ProcessCmdAddPointer: invalid pointer value in "etc/acpi/tables"
OnRootBridgesConnected: InstallAcpiTables: Protocol Error
Debugging shows that on first reboot(after hot adding NVDIMM),
Qemu updates the etc/table-loader len,
qemu_ram_resize()
fw_cfg_modify_file()
fw_cfg_modify_bytes_read()
And in fw_cfg_modify_bytes_read() we set the "callback_opaque" for
the key entry to NULL. Because of this, on the second reboot,
virt_acpi_build_update() is called with a NULL "build_state" and
returns without updating the ACPI tables. This seems to be
upsetting the firmware.
To fix this, don't change the callback_opaque in fw_cfg_modify_bytes_read().
Fixes: bdbb5b1706 ("fw_cfg: add fw_cfg_machine_reset function")
Reported-by: chenxiang <chenxiang66@hisilicon.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-ID: <20241203131806.37548-1-shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Accel & Exec patch queue
- Ignore writes to CNTP_CTL_EL0 on HVF ARM (Alexander)
- Add '-d invalid_mem' logging option (Zoltan)
- Create QOM containers explicitly (Peter)
- Rename sysemu/ -> system/ (Philippe)
- Re-orderning of include/exec/ headers (Philippe)
Move a lot of declarations from these legacy mixed bag headers:
. "exec/cpu-all.h"
. "exec/cpu-common.h"
. "exec/cpu-defs.h"
. "exec/exec-all.h"
. "exec/translate-all"
to these more specific ones:
. "exec/page-protection.h"
. "exec/translation-block.h"
. "user/cpu_loop.h"
. "user/guest-host.h"
. "user/page-protection.h"
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmdlnyAACgkQ4+MsLN6t
# wN6mBw//QFWi7CrU+bb8KMM53kOU9C507tjn99LLGFb5or73/umDsw6eo/b8DHBt
# KIwGLgATel42oojKfNKavtAzLK5rOrywpboPDpa3SNeF1onW+99NGJ52LQUqIX6K
# A6bS0fPdGG9ZzEuPpbjDXlp++0yhDcdSgZsS42fEsT7Dyj5gzJYlqpqhiXGqpsn8
# 4Y0UMxSL21K3HEexlzw2hsoOBFA3tUm2ujNDhNkt8QASr85yQVLCypABJnuoe///
# 5Ojl5wTBeDwhANET0rhwHK8eIYaNboiM9fHopJYhvyw1bz6yAu9jQwzF/MrL3s/r
# xa4OBHBy5mq2hQV9Shcl3UfCQdk/vDaYaWpgzJGX8stgMGYfnfej1SIl8haJIfcl
# VMX8/jEFdYbjhO4AeGRYcBzWjEJymkDJZoiSWp2NuEDi6jqIW+7yW1q0Rnlg9lay
# ShAqLK5Pv4zUw3t0Jy3qv9KSW8sbs6PQxtzXjk8p97rTf76BJ2pF8sv1tVzmsidP
# 9L92Hv5O34IqzBu2oATOUZYJk89YGmTIUSLkpT7asJZpBLwNM2qLp5jO00WVU0Sd
# +kAn324guYPkko/TVnjC/AY7CMu55EOtD9NU35k3mUAnxXT9oDUeL4NlYtfgrJx6
# x1Nzr2FkS68+wlPAFKNSSU5lTjsjNaFM0bIJ4LCNtenJVP+SnRo=
# =cjz8
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 20 Dec 2024 11:45:20 EST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* tag 'exec-20241220' of https://github.com/philmd/qemu: (59 commits)
util/qemu-timer: fix indentation
meson: Do not define CONFIG_DEVICES on user emulation
system/accel-ops: Remove unnecessary 'exec/cpu-common.h' header
system/numa: Remove unnecessary 'exec/cpu-common.h' header
hw/xen: Remove unnecessary 'exec/cpu-common.h' header
target/mips: Drop left-over comment about Jazz machine
target/mips: Remove tswap() calls in semihosting uhi_fstat_cb()
target/xtensa: Remove tswap() calls in semihosting simcall() helper
accel/tcg: Un-inline translator_is_same_page()
accel/tcg: Include missing 'exec/translation-block.h' header
accel/tcg: Move tcg_cflags_has/set() to 'exec/translation-block.h'
accel/tcg: Restrict curr_cflags() declaration to 'internal-common.h'
qemu/coroutine: Include missing 'qemu/atomic.h' header
exec/translation-block: Include missing 'qemu/atomic.h' header
accel/tcg: Declare cpu_loop_exit_requested() in 'exec/cpu-common.h'
exec/cpu-all: Include 'cpu.h' earlier so MMU_USER_IDX is always defined
target/sparc: Move sparc_restore_state_to_opc() to cpu.c
target/sparc: Uninline cpu_get_tb_cpu_state()
target/loongarch: Declare loongarch_cpu_dump_state() locally
user: Move various declarations out of 'exec/exec-all.h'
...
Conflicts:
hw/char/riscv_htif.c
hw/intc/riscv_aplic.c
target/s390x/cpu.c
Apply sysemu header path changes to not in the pull request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Headers in include/sysemu/ are not only related to system
*emulation*, they are also used by virtualization. Rename
as system/ which is clearer.
Files renamed manually then mechanical change using sed tool.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Lei Yang <leiyang@redhat.com>
Message-Id: <20241203172445.28576-1-philmd@linaro.org>
Now that all uses of fw_cfg_add_extra_pci_roots() have been
converted to the newer pci_bus_add_fw_cfg_extra_pci_roots(),
we can remove that bogus method. hw/nvram/fw_cfg must
stay generic. Device specific entries have to be implemented
using TYPE_FW_CFG_DATA_GENERATOR_INTERFACE.
This mostly reverts commit 0abd38885a
("fw_cfg: Refactor extra pci roots addition").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-7-philmd@linaro.org>
Allow the FW_CFG_DATA_GENERATOR interface get_data() handler to
return NULL when there is nothing to generate. In that case
fw_cfg_add_file_from_generator() will not add any item and
return %true.
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20241213133352.10915-4-philmd@linaro.org>
Currently fw_cfg_add_file_from_generator() is restricted
to command line created objects which reside in the
'/objects' QOM container. In order to extend to other
types of containers, pass the QOM parent by argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-3-philmd@linaro.org>
fw_cfg_add_from_generator() is adding a 'file' entry,
so rename as fw_cfg_add_file_from_generator() for
clarity. Besides, we might introduce generators for
other entry types.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241206181352.6836-2-philmd@linaro.org>
