This patch allows stats-intervals to be used for storage
devices with the -device option. It accepts a list of interval
lengths in JSON format.
It configures and collects the stats in the BlockBackend layer
through the storage device that consumes the BlockBackend.
Signed-off-by: Chandan Somani <csomani@redhat.com>
Message-ID: <20251003220039.1336663-1-csomani@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The difference between these two functions:
- virtio_notify() uses the interrupt code path (MSI or classic IRQs)
- virtio_notify_irqfd() uses guest notifiers (irqfds)
virtio_notify() can only be called with the BQL held because the
interrupt code path requires the BQL. Device models use
virtio_notify_irqfd() from IOThreads since the BQL is not held.
The two functions can be unified by pushing down the if
(qemu_in_iothread()) check from virtio-blk and virtio-scsi into core
virtio code. This is in preparation for the next commit that will add
irqfd support to virtio_notify_config() and where it's unattractive to
introduce another irqfd-only API for device model callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20250922220149.498967-3-stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we have a server running disk requests that is for whatever reason
hanging or not able to process any more IO requests but still has some
in-flight requests previously issued by the guest OS, QEMU will still
try to drain the vring before shutting down even if it was explicitly
asked to do a "force shutdown" via SIGTERM or QMP quit. This is not
useful since the guest is no longer running at this point since it was
killed by QEMU earlier in the process. At this point, we don't care
about whatever in-flight IO it might have pending, we just want QEMU
to shut down.
Add an option called "skip-get-vring-base-on-force-shutdown" to allow
SIGTERM/QMP quit() to actually act like a "force shutdown" at least
for vhost-user-blk devices since those require the drain operation
to shut down gracefully unlike, for example, network devices.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Message-Id: <20250609212547.2859224-4-d-tatianin@yandex-team.ru>
Acked-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The nand.c device (TYPE_NAND) is an emulation of a NAND flash memory
chip which was used by the old OMAP boards. No current QEMU board
uses it, and although techically "-device nand,chip-id=0x6b" doesn't
error out, it's not possible to usefully use it from the command
line because the only interface it has is via calling C functions
like nand_setpins() and nand_setio().
The "config OMAP" stanza (used only by the SX1 board) is the only
thing that does "select NAND" to compile in this code, but the SX1
board doesn't actually use the NAND device.
Remove the NAND device code entirely; this is effectively leftover
cleanup from when we dropped the PXA boards and the OMAP boards
other than the sx1.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20250522142859.3122389-1-peter.maydell@linaro.org
Live migration should be terminated if the vhost-user backend crashes
before the migration completes.
Specifically, since the vhost device will be stopped when VM is stopped
before the end of the live migration, in current implementation if the
backend crashes, vhost-user device set_status() won't return failure,
live migration won't perceive the disconnection between QEMU and the
backend.
When the VM is migrated to the destination, the inflight IO will be
resubmitted, and if the IO was completed out of order before, it will
cause IO error.
To fix this issue:
1. Add the return value to set_status() for VirtioDeviceClass.
a. For the vhost-user device, return failure when the backend crashes.
b. For other virtio devices, always return 0.
2. Return failure if vhost_dev_stop() failed for vhost-user device.
If QEMU loses connection with the vhost-user backend, virtio set_status()
can return failure to the upper layer, migration_completion() can handle
the error, terminate the live migration, and restore the VM, so that
inflight IO can be completed normally.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Message-Id: <20250416024729.3289157-4-haoqian.he@smartx.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the new VM state change cb type `VMChangeStateHandlerWithRet`,
which has return value for `VMChangeStateEntry`.
Thus, we can register a new VM state change cb with return value for device.
Note that `VMChangeStateHandler` and `VMChangeStateHandlerWithRet` are mutually
exclusive and cannot be provided at the same time.
This patch is the pre patch for 'vhost-user: return failure if backend crashes
when live migration', which makes the live migration aware of the loss of
connection with the vhost-user backend and aborts the live migration.
Virtio device will use VMChangeStateHandlerWithRet.
Signed-off-by: Haoqian He <haoqian.he@smartx.com>
Message-Id: <20250416024729.3289157-2-haoqian.he@smartx.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the existing includes with
sed -i ,exec/memory.h,system/memory.h,g
Move the include within cpu-all.h into a !CONFIG_USER_ONLY block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
During normal migration, new QEMU creates and initializes memory regions,
then loads the preserved contents of the region from vmstate.
During CPR, memory regions are preserved in place, then the realize
method initializes the regions contents, losing the old contents. To
fix, skip the re-init during CPR.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <1741380954-341079-3-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Use noun_verb() function naming instead of verb_noun() because the
former is the most common naming style for APIs. The next commit will
move these functions into a header file so that virtio-scsi can call
them.
Shorten iothread_vq_mapping_apply()'s iothread_vq_mapping_list argument
to just "list" like in the other functions.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20250311132616.1049687-10-stefanha@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PropertyInfo member @name becomes ObjectProperty member @type, while
Property member @name becomes ObjectProperty member @name. Rename the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250227085601.4140852-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[One missed instance of @type fixed]
Apple has its own virtio-blk PCI device ID where it deviates from the
official virtio-pci spec slightly: It puts a new "apple type"
field at a static offset in config space and introduces a new barrier
command.
This patch first creates a mechanism for virtio-blk downstream classes to
handle unknown commands. It then creates such a downstream class and a new
vmapple-virtio-blk-pci class which support the additional apple type config
identifier as well as the barrier command.
The 'aux' or 'root' device type are selected using the 'variant' property.
Signed-off-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20241223221645.29911-13-phil@philjordan.eu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The general expectation is that header files should follow the same
file/path naming scheme as the corresponding source file. There are
various historical exceptions to this practice in QEMU, with one of
the most notable being the include/qapi/qmp/ directory. Most of the
headers there correspond to source files in qobject/.
This patch corrects most of that inconsistency by creating
include/qobject/ and moving the headers for qobject/ there.
This also fixes MAINTAINERS for include/qapi/qmp/dispatch.h:
scripts/get_maintainer.pl now reports "QAPI" instead of "No
maintainers found".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com> #s390x
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241118151235.2665921-2-armbru@redhat.com>
[Rebased]
