Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio: regression fix

Fixes regression with migration and vsock, as fixing that
exposes some known issues in vhost user cleanup, this attempts
to fix those as well. More work on vhost user is needed :)

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmOIWaEPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+RQH/2PVAjD/GA3zF5F3Z07vH51c55T6tluZ85c3
# 4u66SSkF5JR1hATCujYCtrt9V0mnqhmhhm4gJH5xcsynFjjyIXd2dDrTFRpCtRgn
# icXOmYCc9pCu8XsluJnWvY/5r/KEDxqmGVE8Kyhz551QjvsBkezhI9x9vhJZJLCn
# Xn1XQ/3jpUcQLwasu8AxZb0IDW8WdCtonbke6xIyMzOYGR2bnRdXlDXVVG1zJ/SZ
# eS3HUad71VekhfzWq0fx8yEJnfvbes9vo007y8rOGdHOcMneWGAie52W1dOBhclh
# Zt56zID55t1USEwlPxkZSj7UXNbVl7Uz/XU5ElN0yTesttP4Iq0=
# =ZkaX
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Dec 2022 02:37:05 EST
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu:
  include/hw: VM state takes precedence in virtio_device_should_start
  hw/virtio: generalise CHR_EVENT_CLOSED handling
  hw/virtio: add started_vu status field to vhost-user-gpio
  vhost: enable vrings in vhost_dev_start() for vhost-user devices
  tests/qtests: override "force-legacy" for gpio virtio-mmio tests

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

include/hw/virtio/vhost-user-gpio.h

@@ -28,7 +28,17 @@ struct VHostUserGPIO {
     VhostUserState vhost_user;
     VirtQueue *command_vq;
     VirtQueue *interrupt_vq;
+    /**
+     * There are at least two steps of initialization of the
+     * vhost-user device. The first is a "connect" step and
+     * second is a "start" step. Make a separation between
+     * those initialization phases by using two fields.
+     *
+     * @connected: see vu_gpio_connect()/vu_gpio_disconnect()
+     * @started_vu: see vu_gpio_start()/vu_gpio_stop()
+     */
     bool connected;
+    bool started_vu;
     /*< public >*/
 };
 

include/hw/virtio/vhost-user.h

@@ -68,4 +68,22 @@ bool vhost_user_init(VhostUserState *user, CharBackend *chr, Error **errp);
  */
 void vhost_user_cleanup(VhostUserState *user);
 
+/**
+ * vhost_user_async_close() - cleanup vhost-user post connection drop
+ * @d: DeviceState for the associated device (passed to callback)
+ * @chardev: the CharBackend associated with the connection
+ * @vhost: the common vhost device
+ * @cb: the user callback function to complete the clean-up
+ *
+ * This function is used to handle the shutdown of a vhost-user
+ * connection to a backend. We handle this centrally to make sure we
+ * do all the steps and handle potential races due to VM shutdowns.
+ * Once the connection is disabled we call a backhalf to ensure
+ */
+typedef void (*vu_async_close_fn)(DeviceState *cb);
+
+void vhost_user_async_close(DeviceState *d,
+                            CharBackend *chardev, struct vhost_dev *vhost,
+                            vu_async_close_fn cb);
+
 #endif

include/hw/virtio/vhost.h

@@ -184,24 +184,26 @@ static inline bool vhost_dev_is_started(struct vhost_dev *hdev)
  * vhost_dev_start() - start the vhost device
  * @hdev: common vhost_dev structure
  * @vdev: the VirtIODevice structure
+ * @vrings: true to have vrings enabled in this call
  *
  * Starts the vhost device. From this point VirtIO feature negotiation
  * can start and the device can start processing VirtIO transactions.
  *
  * Return: 0 on success, < 0 on error.
  */
-int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev);
+int vhost_dev_start(struct vhost_dev *hdev, VirtIODevice *vdev, bool vrings);
 
 /**
  * vhost_dev_stop() - stop the vhost device
  * @hdev: common vhost_dev structure
  * @vdev: the VirtIODevice structure
+ * @vrings: true to have vrings disabled in this call
  *
  * Stop the vhost device. After the device is stopped the notifiers
  * can be disabled (@vhost_dev_disable_notifiers) and the device can
  * be torn down (@vhost_dev_cleanup).
  */
-void vhost_dev_stop(struct vhost_dev *hdev, VirtIODevice *vdev);
+void vhost_dev_stop(struct vhost_dev *hdev, VirtIODevice *vdev, bool vrings);
 
 /**
  * DOC: vhost device configuration handling

include/hw/virtio/virtio.h

@@ -116,6 +116,13 @@ struct VirtIODevice
     bool broken; /* device in invalid state, needs reset */
     bool use_disabled_flag; /* allow use of 'disable' flag when needed */
     bool disabled; /* device in temporarily disabled state */
+    /**
+     * @use_started: true if the @started flag should be used to check the
+     * current state of the VirtIO device. Otherwise status bits
+     * should be checked for a current status of the device.
+     * @use_started is only set via QMP and defaults to true for all
+     * modern machines (since 4.1).
+     */
     bool use_started;
     bool started;
     bool start_on_kick; /* when virtio 1.0 feature has not been negotiated */
@@ -391,6 +398,16 @@ static inline bool virtio_is_big_endian(VirtIODevice *vdev)
     return false;
 }
 
+/**
+ * virtio_device_started() - check if device started
+ * @vdev - the VirtIO device
+ * @status - the devices status bits
+ *
+ * Check if the device is started. For most modern machines this is
+ * tracked via the @vdev->started field (to support migration),
+ * otherwise we check for the final negotiated status bit that
+ * indicates everything is ready.
+ */
 static inline bool virtio_device_started(VirtIODevice *vdev, uint8_t status)
 {
     if (vdev->use_started) {
@@ -411,15 +428,11 @@ static inline bool virtio_device_started(VirtIODevice *vdev, uint8_t status)
  */
 static inline bool virtio_device_should_start(VirtIODevice *vdev, uint8_t status)
 {
-    if (vdev->use_started) {
-        return vdev->started;
-    }
-
     if (!vdev->vm_running) {
         return false;
     }
 
-    return status & VIRTIO_CONFIG_S_DRIVER_OK;
+    return virtio_device_started(vdev, status);
 }
 
 static inline void virtio_set_started(VirtIODevice *vdev, bool started)