UnrealEngineUWP/Engine/Plugins/Experimental/MeshModelingToolsetExp/Source/MeshModelingToolsExp/Public/DrawPolyPathTool.h

// Copyright Epic Games, Inc. All Rights Reserved.

#pragma once

#include "CoreMinimal.h"
#include "UObject/NoExportTypes.h"
#include "BaseTools/MeshSurfacePointTool.h"
#include "Mechanics/PlaneDistanceFromHitMechanic.h"
#include "Mechanics/SpatialCurveDistanceMechanic.h"
#include "Mechanics/CollectSurfacePathMechanic.h"
#include "Mechanics/ConstructionPlaneMechanic.h"
#include "Drawing/PolyEditPreviewMesh.h"
#include "PropertySets/CreateMeshObjectTypeProperties.h"
#include "Properties/MeshMaterialProperties.h"
#include "DrawPolyPathTool.generated.h"

class FMeshVertexChangeBuilder;
class UTransformProxy;

/**
 * ToolBuilder
 */
UCLASS()
class MESHMODELINGTOOLSEXP_API UDrawPolyPathToolBuilder : public UMeshSurfacePointToolBuilder
{
	GENERATED_BODY()
public:
	virtual bool CanBuildTool(const FToolBuilderState& SceneState) const override;

	virtual UInteractiveTool* BuildTool(const FToolBuilderState& SceneState) const override;
};


UENUM()
enum class EDrawPolyPathWidthMode
{
	/** Fixed width along the drawn path determined by the Width property */
	Fixed,

	/** Extrude drawn path to height set via additional mouse input after finishing the path */
	Interactive
};

UENUM()
enum class EDrawPolyPathExtrudeMode
{
	/** Flat path without extrusion */
	Flat,

	/** Extrude drawn path to a fixed height determined by the Extrude Height property */
	Fixed,

	/** Extrude drawn path to height set via additional mouse input after finishing the path */
	Interactive,

	/** Extrude with increasing height along the drawn path. The height at the start and the end of the ramp is determined by the Extrude Height and Ramp Start Ratio properties .*/
	RampFixed,

	/** Extrude with increasing height along the drawn path. The height is set via additional mouse input after finishing the path. */
	RampInteractive
};


UCLASS()
class MESHMODELINGTOOLSEXP_API UDrawPolyPathProperties : public UInteractiveToolPropertySet
{
	GENERATED_BODY()

public:
	/** How the drawn path width gets set */
	UPROPERTY(EditAnywhere, Category = Path)
	EDrawPolyPathWidthMode WidthMode = EDrawPolyPathWidthMode::Interactive;

	/** Width of the drawn path when using Fixed width mode; also shows the width in Interactive width mode */
	UPROPERTY(EditAnywhere, Category = Path, meta = (EditCondition = "WidthMode == EDrawPolyPathWidthMode::Fixed", UIMin = "0.0001", UIMax = "1000", ClampMin = "0", ClampMax = "999999"))
	float Width = 10.0f;

	/** Use arc segments instead of straight lines in corners */
	UPROPERTY(EditAnywhere, Category = Path)
	bool bRoundedCorners = false;

	/** Radius of the corner arcs, as a fraction of path width. This is only available if Rounded Corners is enabled */
	UPROPERTY(EditAnywhere, Category = Path, meta = (EditCondition = "WidthMode == EDrawPolyPathWidthMode::Fixed && bRoundedCorners", UIMin = "0.01", UIMax = "2.0", ClampMin = "0.01", ClampMax = "999999"))
	float CornerRadius = 0.01f;

	/** Number of radial subdivisions for rounded corners */
	UPROPERTY(EditAnywhere, NonTransactional, Category = Path, meta = (UIMin = "3", UIMax = "100", ClampMin = "3", ClampMax = "10000",
		EditCondition = "bRoundedCorners"))
	int RadialSlices = 16;

	/** If true, all quads on the path will belong to the same polygon. If false, each quad gets its own polygon. */
	UPROPERTY(EditAnywhere, Category = Path)
	bool bSinglePolyGroup = false;

	/** If and how the drawn path gets extruded */
	UPROPERTY(EditAnywhere, Category = Extrude)
	EDrawPolyPathExtrudeMode ExtrudeMode = EDrawPolyPathExtrudeMode::Interactive;

	/** Extrusion distance when using the Fixed extrude modes; also shows the distance in Interactive extrude modes */
	UPROPERTY(EditAnywhere, Category = Extrude, meta = (
		EditCondition = "ExtrudeMode == EDrawPolyPathExtrudeMode::Fixed || ExtrudeMode == EDrawPolyPathExtrudeMode::RampFixed",
		UIMin = "-1000", UIMax = "1000", ClampMin = "-10000", ClampMax = "10000"))
	float ExtrudeHeight = 10.0f;

	/** Height of the start of the ramp as a fraction of the Extrude Height property */
	UPROPERTY(EditAnywhere, Category = Extrude, meta = (
		EditCondition = "ExtrudeMode == EDrawPolyPathExtrudeMode::RampFixed || ExtrudeMode == EDrawPolyPathExtrudeMode::RampInteractive",
		UIMin = "0.0", UIMax = "1.0", ClampMin = "0.0", ClampMax = "100.0"))
	float RampStartRatio = 0.05f;

	/** If true, allows snapping to world grid according to editor settings */
	UPROPERTY(EditAnywhere, Category = Snapping)
	bool bSnapToWorldGrid = true;
};



UENUM()
enum class EDrawPolyPathExtrudeDirection
{
	SelectionNormal,
	WorldX,
	WorldY,
	WorldZ,
	LocalX,
	LocalY,
	LocalZ
};


UCLASS()
class MESHMODELINGTOOLSEXP_API UDrawPolyPathExtrudeProperties : public UInteractiveToolPropertySet
{
	GENERATED_BODY()

public:
	UPROPERTY(EditAnywhere, Category = Extrude)
	EDrawPolyPathExtrudeDirection Direction = EDrawPolyPathExtrudeDirection::SelectionNormal;


};



/**
 *
 */
UCLASS()
class MESHMODELINGTOOLSEXP_API UDrawPolyPathTool : public UInteractiveTool, public IClickBehaviorTarget, public IHoverBehaviorTarget
{
	GENERATED_BODY()
public:

	virtual void SetWorld(UWorld* World);

	virtual void Setup() override;
	virtual void Shutdown(EToolShutdownType ShutdownType) override;

	virtual void OnTick(float DeltaTime) override;
	virtual void Render(IToolsContextRenderAPI* RenderAPI) override;

	virtual bool HasCancel() const override { return false; }
	virtual bool HasAccept() const override { return false; }
	virtual bool CanAccept() const override { return false; }

	virtual bool HitTest(const FRay& Ray, FHitResult& OutHit);

	// IClickBehaviorTarget API
	virtual FInputRayHit IsHitByClick(const FInputDeviceRay& ClickPos) override;
	virtual void OnClicked(const FInputDeviceRay& ClickPos) override;

	// IHoverBehaviorTarget API
	virtual FInputRayHit BeginHoverSequenceHitTest(const FInputDeviceRay& PressPos) override;
	virtual void OnBeginHover(const FInputDeviceRay& DevicePos) override {}
	virtual bool OnUpdateHover(const FInputDeviceRay& DevicePos) override;
	virtual void OnEndHover() override {}

protected:
	UWorld* TargetWorld;

	/** Property set for type of output object (StaticMesh, Volume, etc) */
	UPROPERTY()
	TObjectPtr<UCreateMeshObjectTypeProperties> OutputTypeProperties;

	UPROPERTY()
	TObjectPtr<UDrawPolyPathProperties> TransformProps;

	UPROPERTY()
	TObjectPtr<UDrawPolyPathExtrudeProperties> ExtrudeProperties;

	UPROPERTY()
	TObjectPtr<UNewMeshMaterialProperties> MaterialProperties;

protected:
	// camera state at last render
	UE::Geometry::FTransform3d WorldTransform;
	FViewCameraState CameraState;

	// drawing plane and gizmo

	UPROPERTY()
	TObjectPtr<UConstructionPlaneMechanic> PlaneMechanic = nullptr;

	UE::Geometry::FFrame3d DrawPlaneWorld;

	bool CanUpdateDrawPlane() const;

	// UV Scale factor to apply to texturing on any new geometry (e.g. new faces added by extrude)
	float UVScaleFactor = 1.0f;

	TArray<UE::Geometry::FFrame3d> CurPathPoints;
	TArray<double> OffsetScaleFactors;
	TArray<FVector3d> CurPolyLine;
	double CurPathLength;
	double CurWidth;
	double CurRadius;
	double CurHeight;
	bool bHasSavedWidth = false;
	float SavedWidth;
	bool bHasSavedExtrudeHeight = false;
	float SavedExtrudeHeight;
	bool bPathIsClosed = false;		// If true, CurPathPoints are assumed to define a closed path

	TArray<FVector3d> CurPolyLoop;
	TArray<FVector3d> SecondPolyLoop;

	UPROPERTY()
	TObjectPtr<UPolyEditPreviewMesh> EditPreview;

	UPROPERTY()
	TObjectPtr<UPlaneDistanceFromHitMechanic> ExtrudeHeightMechanic = nullptr;
	UPROPERTY()
	TObjectPtr<USpatialCurveDistanceMechanic> CurveDistMechanic = nullptr;
	UPROPERTY()
	TObjectPtr<UCollectSurfacePathMechanic> SurfacePathMechanic = nullptr;

	bool bSpecifyingRadius = false;

	void InitializeNewSurfacePath();
	void UpdateSurfacePathPlane();
	void OnCompleteSurfacePath();

	void BeginInteractiveWidth();
	void BeginConstantWidth();
	void OnCompleteWidth();

	void BeginInteractiveRadius();
	void BeginConstantRadius();
	void OnCompleteRadius();

	void BeginInteractiveExtrudeHeight();
	void UpdateExtrudePreview();
	void OnCompleteExtrudeHeight();

	void UpdatePathPreview();
	void InitializePreviewMesh();
	void ClearPreview();

	void GeneratePathMesh(UE::Geometry::FDynamicMesh3& Mesh);
	void GenerateExtrudeMesh(UE::Geometry::FDynamicMesh3& PathMesh);
	void EmitNewObject();

	// user feedback messages
	void ShowStartupMessage();
	void ShowExtrudeMessage();
	void ShowOffsetMessage();

	friend class FDrawPolyPathStateChange;
	int32 CurrentCurveTimestamp = 1;
	void UndoCurrentOperation();
	bool CheckInCurve(int32 Timestamp) const { return CurrentCurveTimestamp == Timestamp; }
};




class MESHMODELINGTOOLSEXP_API FDrawPolyPathStateChange : public FToolCommandChange
{
public:
	bool bHaveDoneUndo = false;
	int32 CurveTimestamp = 0;
	FDrawPolyPathStateChange(int32 CurveTimestampIn)
	{
		CurveTimestamp = CurveTimestampIn;
	}
	virtual void Apply(UObject* Object) override {}
	virtual void Revert(UObject* Object) override;
	virtual bool HasExpired(UObject* Object) const override;
	virtual FString ToString() const override;
};