2016-12-08 08:52:44 -05:00
|
|
|
// Copyright 1998-2017 Epic Games, Inc. All Rights Reserved.
|
Copying //UE4/Dev-Rendering to Dev-Main (//UE4/Dev-Main)
#lockdown ben.marsh
==========================
MAJOR FEATURES + CHANGES
==========================
Change 2774277 on 2015/11/19 by Gil.Gribb
UE4 - Did minor optimizations to the PS4 RHI and drawlists.
Change 2791226 on 2015/12/04 by Uriel.Doyon
Added source code for Embree 2.7.0
Removed duplicate files from the /doc folder.
Change 2800193 on 2015/12/11 by Marcus.Wassmer
SSAO AsyncCompute support.
#rb Martin.Mittring
Change 2801631 on 2015/12/14 by Olaf.Piesche
Making auto deactivate true by default, moving checks to HasCompleted, eliminating some unnecessary logic
#rb martin.mittring
Change 2803240 on 2015/12/15 by Gil.Gribb
UE4 - Added command to collect stats on spammy stats.
Change 2803476 on 2015/12/15 by Rolando.Caloca
DR - Allow toggling compute skin dispatch at runtime
- r.SkinCacheShaders Now enable the shaders and feature
- r.SkinCaching enables toggling at runtime
- r.SkinCache.BufferSize Sets the size in bytes of buffer for outputting
- Now uses 3 UAV buffers instead of one (avoid RenderDoc crashes)
#codereview Marcus.Wassmer, Martin.Mittring
Change 2803940 on 2015/12/15 by Marcus.Wassmer
Add r.PS4.AsyncComputeBudgetMode to switch between CUMasking and WaveLimit modes. So far it looks like WaveLimits behave better in UE4.
Also rearrange AsyncSSAO to run immediately after HZB to overlap with occlusion queries. In my testing this takes SSAO cost from .5ms -> .2ms. However it had to be hacked to run without normals. Hopefully Martin can get some real AsyncSSAO in.
#rb Martin.Mittring
#codereview Martin.Mittring
Change 2803999 on 2015/12/15 by Uriel.Doyon
Refactored the shader complexity material override logic to allow other viewmodes shader overrides.
TexelFactorAccuracy ViewMode : shows the accuracy of the static mesh texel factors, used for streaming.
WantedMipsAccuracy ViewMode : shows the accuracy of the static mesh wanted mips accuracy, used for streaming.
Added an option to stream textures based on the AABB distance instead of using the sphere approximation.
Added an option to only keep a the wanted mips.
Moved optimization related viewmodes into a submenu to avoid polluting the interface.
#jira UE-24502
#jira UE-24503
#jira UERNDR-89
Change 2804150 on 2015/12/15 by Olaf.Piesche
make separate translucency screen percentage a bit more robust; add numsamples to the render target creation functions in preparation for MSAA support for higher quality with low res separate translucency
#rb martin.mittring
Change 2804367 on 2015/12/15 by Daniel.Wright
Capsule shadow primitives are tracked separately on registration - saves 2.6ms of RT time doing the view frustum culling in a medium sized map
Change 2805293 on 2015/12/16 by Olaf.Piesche
logging if potentially immortal emitters are spawned from gameplay; this should catch if we spawn burst only emitters with indefinite life spans (muzzle flashes, hit impacts, etc.)
#rb martin.mittring
Change 2805586 on 2015/12/16 by Zabir.Hoque
Adding support for decals to fade and destroy themselves automatically.
#CodeReview: Martin.Mittring, Daniel.Wright, Olaf.Piesche
Change 2807663 on 2015/12/17 by Rolando.Caloca
DR - Remove expensive logging
#codereview Marcus.Wassmer
Change 2807903 on 2015/12/17 by Zabir.Hoque
Refactored DecalComponent's lifetime management such that it can be set and reset from Blueprints.
#CodeReview Daniel.Wright, Martin.Mittring, Olaf.Piesche
Change 2809261 on 2015/12/18 by Martin.Mittring
Added VisualizeShadingModels to track down issues like that:
FORT-16913 Textures on Hero Mesh is not shown
#rb:David.Hill
#code_review:Bob.Tellez
Change 2810136 on 2015/12/21 by Rolando.Caloca
DR - Added back draw event colors
PR #1602
#jira UE-21526
#codereview Mark.Satterthwaite, Keith.Judge, Marcus.Wassmer, Josh.Adams
Change 2810680 on 2015/12/21 by Martin.Mittring
moved SSAO ComputeShader running without per pixel normal (for AsyncCompute) into DevRendering
#test:editor
Change 2811205 on 2015/12/22 by Brian.Karis
Pulled clear coat out of the reflection compute shader. Added permutation for skylight.
Clear coat base layer now done in base pass. It only picks up the closest capture. This will cause popping when the object moves. Still needs a cross fade.
Change 2811275 on 2015/12/22 by David.Hill
UE-24675
#rb martin.mittring
Corrected buffer-size related problem with fringe.
Change 2811397 on 2015/12/22 by Brian.Karis
2016-01-08 11:12:28 -05:00
|
|
|
|
|
|
|
|
/*=============================================================================
|
|
|
|
|
DebugViewModeCommon.hlsl: Debug pixel shader interpolants.
|
|
|
|
|
=============================================================================*/
|
|
|
|
|
|
|
|
|
|
// This define the interpolant needed by the pixel shader used for debug viewmode.
|
|
|
|
|
// Those use a global shader that must have exactly the same inputs as the VS outputs.
|
|
|
|
|
// This is also compatible with shaders that modify the mesh position (like tesselation).
|
|
|
|
|
// Which is better in the end than simply defining a material override.
|
|
|
|
|
|
|
|
|
|
struct FDebugVSToPS
|
|
|
|
|
{
|
|
|
|
|
// TexCoords must first in order to be compatible with viewmode requiring using only SV_Position
|
|
|
|
|
float4 Position : SV_POSITION;
|
2016-02-16 05:48:48 -05:00
|
|
|
float4 VertexColor : TEXCOORD0;
|
2016-04-04 18:44:59 -04:00
|
|
|
float4 TexCoord01 : TEXCOORD1;
|
|
|
|
|
float4 TexCoord23 : TEXCOORD2;
|
|
|
|
|
float3 TangentToWorld0 : TEXCOORD3;
|
|
|
|
|
float3 TangentToWorld1 : TEXCOORD4;
|
|
|
|
|
float3 TangentToWorld2 : TEXCOORD5;
|
2016-01-12 18:42:25 -05:00
|
|
|
#if INSTANCED_STEREO
|
2016-04-11 23:01:18 -04:00
|
|
|
nointerpolation uint PackedEyeIndex : PACKED_EYE_INDEX;
|
2016-01-12 18:42:25 -05:00
|
|
|
#endif
|
Copying //UE4/Dev-Rendering to Dev-Main (//UE4/Dev-Main)
#lockdown ben.marsh
==========================
MAJOR FEATURES + CHANGES
==========================
Change 2774277 on 2015/11/19 by Gil.Gribb
UE4 - Did minor optimizations to the PS4 RHI and drawlists.
Change 2791226 on 2015/12/04 by Uriel.Doyon
Added source code for Embree 2.7.0
Removed duplicate files from the /doc folder.
Change 2800193 on 2015/12/11 by Marcus.Wassmer
SSAO AsyncCompute support.
#rb Martin.Mittring
Change 2801631 on 2015/12/14 by Olaf.Piesche
Making auto deactivate true by default, moving checks to HasCompleted, eliminating some unnecessary logic
#rb martin.mittring
Change 2803240 on 2015/12/15 by Gil.Gribb
UE4 - Added command to collect stats on spammy stats.
Change 2803476 on 2015/12/15 by Rolando.Caloca
DR - Allow toggling compute skin dispatch at runtime
- r.SkinCacheShaders Now enable the shaders and feature
- r.SkinCaching enables toggling at runtime
- r.SkinCache.BufferSize Sets the size in bytes of buffer for outputting
- Now uses 3 UAV buffers instead of one (avoid RenderDoc crashes)
#codereview Marcus.Wassmer, Martin.Mittring
Change 2803940 on 2015/12/15 by Marcus.Wassmer
Add r.PS4.AsyncComputeBudgetMode to switch between CUMasking and WaveLimit modes. So far it looks like WaveLimits behave better in UE4.
Also rearrange AsyncSSAO to run immediately after HZB to overlap with occlusion queries. In my testing this takes SSAO cost from .5ms -> .2ms. However it had to be hacked to run without normals. Hopefully Martin can get some real AsyncSSAO in.
#rb Martin.Mittring
#codereview Martin.Mittring
Change 2803999 on 2015/12/15 by Uriel.Doyon
Refactored the shader complexity material override logic to allow other viewmodes shader overrides.
TexelFactorAccuracy ViewMode : shows the accuracy of the static mesh texel factors, used for streaming.
WantedMipsAccuracy ViewMode : shows the accuracy of the static mesh wanted mips accuracy, used for streaming.
Added an option to stream textures based on the AABB distance instead of using the sphere approximation.
Added an option to only keep a the wanted mips.
Moved optimization related viewmodes into a submenu to avoid polluting the interface.
#jira UE-24502
#jira UE-24503
#jira UERNDR-89
Change 2804150 on 2015/12/15 by Olaf.Piesche
make separate translucency screen percentage a bit more robust; add numsamples to the render target creation functions in preparation for MSAA support for higher quality with low res separate translucency
#rb martin.mittring
Change 2804367 on 2015/12/15 by Daniel.Wright
Capsule shadow primitives are tracked separately on registration - saves 2.6ms of RT time doing the view frustum culling in a medium sized map
Change 2805293 on 2015/12/16 by Olaf.Piesche
logging if potentially immortal emitters are spawned from gameplay; this should catch if we spawn burst only emitters with indefinite life spans (muzzle flashes, hit impacts, etc.)
#rb martin.mittring
Change 2805586 on 2015/12/16 by Zabir.Hoque
Adding support for decals to fade and destroy themselves automatically.
#CodeReview: Martin.Mittring, Daniel.Wright, Olaf.Piesche
Change 2807663 on 2015/12/17 by Rolando.Caloca
DR - Remove expensive logging
#codereview Marcus.Wassmer
Change 2807903 on 2015/12/17 by Zabir.Hoque
Refactored DecalComponent's lifetime management such that it can be set and reset from Blueprints.
#CodeReview Daniel.Wright, Martin.Mittring, Olaf.Piesche
Change 2809261 on 2015/12/18 by Martin.Mittring
Added VisualizeShadingModels to track down issues like that:
FORT-16913 Textures on Hero Mesh is not shown
#rb:David.Hill
#code_review:Bob.Tellez
Change 2810136 on 2015/12/21 by Rolando.Caloca
DR - Added back draw event colors
PR #1602
#jira UE-21526
#codereview Mark.Satterthwaite, Keith.Judge, Marcus.Wassmer, Josh.Adams
Change 2810680 on 2015/12/21 by Martin.Mittring
moved SSAO ComputeShader running without per pixel normal (for AsyncCompute) into DevRendering
#test:editor
Change 2811205 on 2015/12/22 by Brian.Karis
Pulled clear coat out of the reflection compute shader. Added permutation for skylight.
Clear coat base layer now done in base pass. It only picks up the closest capture. This will cause popping when the object moves. Still needs a cross fade.
Change 2811275 on 2015/12/22 by David.Hill
UE-24675
#rb martin.mittring
Corrected buffer-size related problem with fringe.
Change 2811397 on 2015/12/22 by Brian.Karis
2016-01-08 11:12:28 -05:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct FDebugPSIn
|
|
|
|
|
{
|
|
|
|
|
float4 SvPosition : SV_POSITION;
|
2016-02-16 05:48:48 -05:00
|
|
|
float4 VertexColor : TEXCOORD0;
|
2016-04-04 18:44:59 -04:00
|
|
|
float4 TexCoord01 : TEXCOORD1;
|
|
|
|
|
float4 TexCoord23 : TEXCOORD2;
|
|
|
|
|
float3 TangentToWorld0 : TEXCOORD3;
|
|
|
|
|
float3 TangentToWorld1 : TEXCOORD4;
|
|
|
|
|
float3 TangentToWorld2 : TEXCOORD5;
|
2016-01-12 18:42:25 -05:00
|
|
|
#if INSTANCED_STEREO
|
2016-04-11 23:01:18 -04:00
|
|
|
nointerpolation uint PackedEyeIndex : PACKED_EYE_INDEX;
|
2016-01-12 18:42:25 -05:00
|
|
|
#endif
|
Copying //UE4/Dev-Rendering to Dev-Main (//UE4/Dev-Main)
#lockdown ben.marsh
==========================
MAJOR FEATURES + CHANGES
==========================
Change 2774277 on 2015/11/19 by Gil.Gribb
UE4 - Did minor optimizations to the PS4 RHI and drawlists.
Change 2791226 on 2015/12/04 by Uriel.Doyon
Added source code for Embree 2.7.0
Removed duplicate files from the /doc folder.
Change 2800193 on 2015/12/11 by Marcus.Wassmer
SSAO AsyncCompute support.
#rb Martin.Mittring
Change 2801631 on 2015/12/14 by Olaf.Piesche
Making auto deactivate true by default, moving checks to HasCompleted, eliminating some unnecessary logic
#rb martin.mittring
Change 2803240 on 2015/12/15 by Gil.Gribb
UE4 - Added command to collect stats on spammy stats.
Change 2803476 on 2015/12/15 by Rolando.Caloca
DR - Allow toggling compute skin dispatch at runtime
- r.SkinCacheShaders Now enable the shaders and feature
- r.SkinCaching enables toggling at runtime
- r.SkinCache.BufferSize Sets the size in bytes of buffer for outputting
- Now uses 3 UAV buffers instead of one (avoid RenderDoc crashes)
#codereview Marcus.Wassmer, Martin.Mittring
Change 2803940 on 2015/12/15 by Marcus.Wassmer
Add r.PS4.AsyncComputeBudgetMode to switch between CUMasking and WaveLimit modes. So far it looks like WaveLimits behave better in UE4.
Also rearrange AsyncSSAO to run immediately after HZB to overlap with occlusion queries. In my testing this takes SSAO cost from .5ms -> .2ms. However it had to be hacked to run without normals. Hopefully Martin can get some real AsyncSSAO in.
#rb Martin.Mittring
#codereview Martin.Mittring
Change 2803999 on 2015/12/15 by Uriel.Doyon
Refactored the shader complexity material override logic to allow other viewmodes shader overrides.
TexelFactorAccuracy ViewMode : shows the accuracy of the static mesh texel factors, used for streaming.
WantedMipsAccuracy ViewMode : shows the accuracy of the static mesh wanted mips accuracy, used for streaming.
Added an option to stream textures based on the AABB distance instead of using the sphere approximation.
Added an option to only keep a the wanted mips.
Moved optimization related viewmodes into a submenu to avoid polluting the interface.
#jira UE-24502
#jira UE-24503
#jira UERNDR-89
Change 2804150 on 2015/12/15 by Olaf.Piesche
make separate translucency screen percentage a bit more robust; add numsamples to the render target creation functions in preparation for MSAA support for higher quality with low res separate translucency
#rb martin.mittring
Change 2804367 on 2015/12/15 by Daniel.Wright
Capsule shadow primitives are tracked separately on registration - saves 2.6ms of RT time doing the view frustum culling in a medium sized map
Change 2805293 on 2015/12/16 by Olaf.Piesche
logging if potentially immortal emitters are spawned from gameplay; this should catch if we spawn burst only emitters with indefinite life spans (muzzle flashes, hit impacts, etc.)
#rb martin.mittring
Change 2805586 on 2015/12/16 by Zabir.Hoque
Adding support for decals to fade and destroy themselves automatically.
#CodeReview: Martin.Mittring, Daniel.Wright, Olaf.Piesche
Change 2807663 on 2015/12/17 by Rolando.Caloca
DR - Remove expensive logging
#codereview Marcus.Wassmer
Change 2807903 on 2015/12/17 by Zabir.Hoque
Refactored DecalComponent's lifetime management such that it can be set and reset from Blueprints.
#CodeReview Daniel.Wright, Martin.Mittring, Olaf.Piesche
Change 2809261 on 2015/12/18 by Martin.Mittring
Added VisualizeShadingModels to track down issues like that:
FORT-16913 Textures on Hero Mesh is not shown
#rb:David.Hill
#code_review:Bob.Tellez
Change 2810136 on 2015/12/21 by Rolando.Caloca
DR - Added back draw event colors
PR #1602
#jira UE-21526
#codereview Mark.Satterthwaite, Keith.Judge, Marcus.Wassmer, Josh.Adams
Change 2810680 on 2015/12/21 by Martin.Mittring
moved SSAO ComputeShader running without per pixel normal (for AsyncCompute) into DevRendering
#test:editor
Change 2811205 on 2015/12/22 by Brian.Karis
Pulled clear coat out of the reflection compute shader. Added permutation for skylight.
Clear coat base layer now done in base pass. It only picks up the closest capture. This will cause popping when the object moves. Still needs a cross fade.
Change 2811275 on 2015/12/22 by David.Hill
UE-24675
#rb martin.mittring
Corrected buffer-size related problem with fringe.
Change 2811397 on 2015/12/22 by Brian.Karis
2016-01-08 11:12:28 -05:00
|
|
|
uint SvPrimitiveID : SV_PrimitiveID;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
// This one is only compatible if no previous stage outputed SV_PrimitiveID (i.e. geometry shader)
|
|
|
|
|
struct FDebugPSInLean
|
|
|
|
|
{
|
|
|
|
|
float4 SvPosition : SV_POSITION;
|
|
|
|
|
uint PrimitiveID : SV_PrimitiveID;
|
|
|
|
|
};
|
2016-02-16 05:48:48 -05:00
|
|
|
|
|
|
|
|
#if DEBUG_MATERIAL_PARAMETERS
|
|
|
|
|
/** Converts from vertex factory specific interpolants to a FMaterialPixelParameters, which is used by material inputs. */
|
|
|
|
|
FMaterialPixelParameters GetMaterialPixelParameters(FDebugPSIn DebugInputs, float4 SvPosition)
|
|
|
|
|
{
|
|
|
|
|
// GetMaterialPixelParameters is responsible for fully initializing the result
|
|
|
|
|
FMaterialPixelParameters Result = MakeInitializedMaterialPixelParameters();
|
|
|
|
|
|
|
|
|
|
Result.VertexColor = DebugInputs.VertexColor;
|
|
|
|
|
|
|
|
|
|
Result.TangentToWorld = half3x3(half3(DebugInputs.TangentToWorld0), half3(DebugInputs.TangentToWorld1), half3(DebugInputs.TangentToWorld2));
|
|
|
|
|
|
|
|
|
|
#if NUM_MATERIAL_TEXCOORDS > 0
|
2016-04-04 18:44:59 -04:00
|
|
|
Result.TexCoords[0].xy = DebugInputs.TexCoord01.xy;
|
|
|
|
|
#endif
|
|
|
|
|
#if NUM_MATERIAL_TEXCOORDS > 1
|
|
|
|
|
Result.TexCoords[1].xy = DebugInputs.TexCoord01.zw;
|
|
|
|
|
#endif
|
|
|
|
|
#if NUM_MATERIAL_TEXCOORDS > 2
|
|
|
|
|
Result.TexCoords[2].xy = DebugInputs.TexCoord23.xy;
|
|
|
|
|
#endif
|
|
|
|
|
#if NUM_MATERIAL_TEXCOORDS > 3
|
|
|
|
|
Result.TexCoords[3].xy = DebugInputs.TexCoord23.zw;
|
|
|
|
|
#endif
|
|
|
|
|
#if NUM_MATERIAL_TEXCOORDS > 4
|
|
|
|
|
for(int CoordinateIndex = 4; CoordinateIndex < NUM_MATERIAL_TEXCOORDS; CoordinateIndex++)
|
|
|
|
|
{
|
|
|
|
|
Result.TexCoords[CoordinateIndex] = DebugInputs.TexCoord01.xy;
|
|
|
|
|
}
|
2016-02-16 05:48:48 -05:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
Result.TwoSidedSign = 1;
|
|
|
|
|
return Result;
|
|
|
|
|
}
|
|
|
|
|
#endif
|
