#ifndef _CONTROLLER_H
#define _CONTROLLER_H
#include "libultra_internal.h"
//#include <rcp.h>

//should go somewhere else but
#define ARRLEN(x) ((s32)(sizeof(x) / sizeof(x[0])))
#define CHNL_ERR(format) ((format.rxsize & 0xC0) >> 4)

typedef struct
{
    /* 0x0 */ u32 ramarray[15];
    /* 0x3C */ u32 pifstatus;
} OSPifRam;

typedef struct
{
    /* 0x0 */ u8 dummy;
    /* 0x1 */ u8 txsize;
    /* 0x2 */ u8 rxsize;
    /* 0x3 */ u8 cmd;
    /* 0x4 */ u16 button;
    /* 0x6 */ s8 stick_x;
    /* 0x7 */ s8 stick_y;
} __OSContReadFormat;

typedef struct
{
    /* 0x0 */ u8 dummy;
    /* 0x1 */ u8 txsize;
    /* 0x2 */ u8 rxsize;
    /* 0x3 */ u8 cmd;
    /* 0x4 */ u8 typeh;
    /* 0x5 */ u8 typel;
    /* 0x6 */ u8 status;
    /* 0x7 */ u8 dummy1;
} __OSContRequesFormat;

typedef struct
{
    /* 0x0 */ u8 txsize;
    /* 0x1 */ u8 rxsize;
    /* 0x2 */ u8 cmd;
    /* 0x3 */ u8 typeh;
    /* 0x4 */ u8 typel;
    /* 0x5 */ u8 status;
} __OSContRequesFormatShort;

typedef struct
{
    /* 0x0 */ u8 dummy;
    /* 0x1 */ u8 txsize;
    /* 0x2 */ u8 rxsize;
    /* 0x3 */ u8 cmd;
    /* 0x4 */ u16 address;
    /* 0x6 */ u8 data[32];
    /* 0x26 */ u8 datacrc;
} __OSContRamReadFormat;


typedef struct
{
    /* 0x0 */ u8 txsize;
    /* 0x1 */ u8 rxsize;
    /* 0x2 */ u8 cmd;
    /* 0x3 */ u8 address;
    /* 0x4 */ u8 data[EEPROM_BLOCK_SIZE];
} __OSContEepromFormat;

//from: http://en64.shoutwiki.com/wiki/SI_Registers_Detailed#CONT_CMD_Usage
#define CONT_CMD_REQUEST_STATUS 0
#define CONT_CMD_READ_BUTTON 1
#define CONT_CMD_READ_MEMPACK 2
#define CONT_CMD_WRITE_MEMPACK 3
#define CONT_CMD_READ_EEPROM 4
#define CONT_CMD_WRITE_EEPROM 5
#define CONT_CMD_RESET 0xff

#define CONT_CMD_REQUEST_STATUS_TX 1
#define CONT_CMD_READ_BUTTON_TX 1
#define CONT_CMD_READ_MEMPACK_TX 3
#define CONT_CMD_WRITE_MEMPACK_TX 35
#define CONT_CMD_READ_EEPROM_TX 2
#define CONT_CMD_WRITE_EEPROM_TX 10
#define CONT_CMD_RESET_TX 1

#define CONT_CMD_REQUEST_STATUS_RX 3
#define CONT_CMD_READ_BUTTON_RX 4
#define CONT_CMD_READ_MEMPACK_RX 33
#define CONT_CMD_WRITE_MEMPACK_RX 1
#define CONT_CMD_READ_EEPROM_RX 8
#define CONT_CMD_WRITE_EEPROM_RX 1
#define CONT_CMD_RESET_RX 3

#define CONT_CMD_NOP 0xff
#define CONT_CMD_END 0xfe //indicates end of a command
#define CONT_CMD_EXE 1    //set pif ram status byte to this to do a command

#define DIR_STATUS_EMPTY 0
#define DIR_STATUS_UNKNOWN 1
#define DIR_STATUS_OCCUPIED 2



//some version of this almost certainly existed since there's plenty of times where it's used right before a return 0
#define ERRCK(fn) \
    ret = fn;     \
    if (ret != 0) \
        return ret;

#define SET_ACTIVEBANK_TO_ZERO        \
    if (pfs->activebank != 0)         \
    {                                 \
        pfs->activebank = 0;          \
        ERRCK(__osPfsSelectBank(pfs)) \
    }

#define PFS_CHECK_ID                              \
    if (__osCheckId(pfs) == PFS_ERR_NEW_PACK) \
        return PFS_ERR_NEW_PACK;
#endif

#define PFS_CHECK_STATUS                          \
    if ((pfs->status & PFS_INITIALIZED) == 0) \
        return PFS_ERR_INVALID;

#define PFS_GET_STATUS                      \
    __osSiGetAccess();                      \
    ret = __osPfsGetStatus(queue, channel); \
    __osSiRelAccess();                      \
    if (ret != 0)                           \
        return ret;