Improved the functionality of ElevatorsFile to allow to change the FRM images of the elevator panel and create new elevator types (from Mr.Stalin)

artifacts/config_files/elevators.ini

@@ -1,11 +1,12 @@
 ;Controls the elevators
-;Image must match up with the image of an existing elevator
+;Image must match up with the image of an existing elevator (can be overrided in sfall 4.1.4 or newer)
 ;Make sure you specify the correct number of exit targets
 ;The maximum number of elevators is currently capped at 50
+;Use the line number (0-indexed) of the corresponding FRM in intrface.lst to set the appearance of the elevator
 
 ;Override elevator 0
-[000]
-;This elevator uses the frm of the original forth elevator
+[0]
+;This elevator will use the settings of the original forth elevator
 Image=4
 
 ;Set up the first exit point
@@ -23,4 +24,23 @@ ID3=50
 Elevation3=0
 Tile3=12944
 
-;No forth exit point
+;No forth exit point
+
+;Override FRM images of elevator 0. Set ButtonsFrm to -1 to use default buttons from MainFrm
+MainFrm=143
+ButtonsFrm=-1
+
+
+;An example of a new elevator
+[24]
+;Set Image to 24 to create a new elevator type (0-23 are the original elevator types)
+Image=24
+
+;Set the number of buttons
+ButtonCount=3
+
+;Set up the appearance of the elevator
+MainFrm=148
+ButtonsFrm=151
+
+;Set up the exit points for all three buttons (see examples above)