Commit Graph

286 Commits

Author SHA1 Message Date
Chandler Carruth edfa37effa [vectorizer] Add an override for the target instruction cost and use it
to stabilize a test that really is trying to test generic behavior and
not a specific target's behavior.

llvm-svn: 200215
2014-01-27 11:41:50 +00:00
Chandler Carruth 2bb03ba605 [vectorizer] Simplify code to use existing helpers on the Function
object and fewer pointless variables.

Also, add a clarifying comment and a FIXME because the code which
disables *all* vectorization if we can't use implicit floating point
instructions just makes no sense at all.

llvm-svn: 200214
2014-01-27 11:27:37 +00:00
Chandler Carruth 147c23278f [vectorizer] Teach the loop vectorizer's unroller to only unroll by
powers of two. This is essentially always the correct thing given the
impact on alignment, scaling factors that can be used in addressing
modes, etc. Also, fix the management of the unroll vs. small loop cost
to more accurately model things with this world.

Enhance a test case to actually exercise more of the unroll machinery if
using synthetic constants rather than a specific target model. Before
this change, with the added flags this test will unroll 3 times instead
of either 2 or 4 (the two sensible answers).

While I don't expect this to make a huge difference, if there are lots
of loops sitting right on the edge of hitting the 'small unroll' factor,
they might change behavior. However, I've benchmarked moving the small
loop cost up and down in many various ways and by a huge factor (2x)
without seeing more than 0.2% code size growth. Small adjustments such
as the series that led up here have led to about 1% improvement on some
benchmarks, but it is very close to the noise floor so I mostly checked
that nothing regressed. Let me know if you see bad behavior on other
targets but I don't expect this to be a sufficiently dramatic change to
trigger anything.

llvm-svn: 200213
2014-01-27 11:12:24 +00:00
Chandler Carruth 7f90b4530b [vectorizer] Add some flags which are useful for conducting experiments
with the unrolling behavior in the loop vectorizer. No functionality
changed at this point.

These are a bit hack-y, but talking with Hal, there doesn't seem to be
a cleaner way to easily experiment with different thresholds here and he
was also interested in them so I wanted to commit them. Suggestions for
improvement are very welcome here.

llvm-svn: 200212
2014-01-27 11:12:19 +00:00
Chandler Carruth 328998b2f7 [vectorizer] Fix a trivial oversight where we always requested the
number of vector registers rather than toggling between vector and
scalar register number based on VF. I don't have a test case as
I spotted this by inspection and on X86 it only makes a difference if
your target is lacking SSE and thus has *no* vector registers.

If someone wants to add a test case for this for ARM or somewhere else
where this is more significant, that would be awesome.

Also made the variable name a bit more sensible while I'm here.

llvm-svn: 200211
2014-01-27 11:12:14 +00:00
Chandler Carruth 56612b204a [vectorizer] Clean up the handling of unvectorized loop unrolling in the
LoopVectorize pass.

The logic here doesn't make much sense. We *only* unrolled if the
unvectorized loop was a reduction loop with a single basic block *and*
small loop body. The reduction part in particular doesn't make much
sense. Instead, if we just fall through to the vectorized unroll logic
it makes more sense of unrolling if there is a vectorized reduction that
could be hacked on by the SLP vectorizer *or* if the loop is small.

This is mostly a cleanup and nothing in the test suite really exercises
this, but I did run benchmarks across this change and saw no really
significant changes.

llvm-svn: 200198
2014-01-27 08:17:58 +00:00
Chandler Carruth 3aebcb99f7 [LPM] Conclude my immediate work by making the LoopVectorizer
a FunctionPass. With this change the loop vectorizer no longer is a loop
pass and can readily depend on function analyses. In particular, with
this change we no longer have to form a loop pass manager to run the
loop vectorizer which simplifies the entire pass management of LLVM.

The next step here is to teach the loop vectorizer to leverage profile
information through the profile information providing analysis passes.

llvm-svn: 200074
2014-01-25 10:01:55 +00:00
Alp Toker cb40291100 Fix known typos
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.

llvm-svn: 200018
2014-01-24 17:20:08 +00:00
Arnold Schwaighofer cc742dd9e4 LoopVectorizer: A reduction that has multiple uses of the reduction value is not
a reduction.

Really. Under certain circumstances (the use list of an instruction has to be
set up right - hence the extra pass in the test case) we would not recognize
when a value in a potential reduction cycle was used multiple times by the
reduction cycle.

Fixes PR18526.
radar://15851149

llvm-svn: 199570
2014-01-19 03:18:31 +00:00
Arnold Schwaighofer dc4c9460a2 LoopVectorize: Only strip casts from integer types when replacing symbolic
strides

Fixes PR18480.

llvm-svn: 199291
2014-01-15 03:35:46 +00:00
Chandler Carruth 73523021d0 [PM] Split DominatorTree into a concrete analysis result object which
can be used by both the new pass manager and the old.

This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.

The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.

Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.

llvm-svn: 199104
2014-01-13 13:07:17 +00:00
Chandler Carruth 5ad5f15cff [cleanup] Move the Dominators.h and Verifier.h headers into the IR
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.

Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.

But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.

llvm-svn: 199082
2014-01-13 09:26:24 +00:00
Arnold Schwaighofer 66c742aeea LoopVectorizer: Enable strided memory accesses versioning per default
I saw no compile or execution time regressions on x86_64 -mavx -O3.

radar://13075509

llvm-svn: 199015
2014-01-11 20:40:34 +00:00
NAKAMURA Takumi 41c409ce0d LoopVectorize.cpp: Appease MSC16.
Excuse me, I hope msc16 builders would be fine till its end day.
Introduce nullptr then. ;)

llvm-svn: 199001
2014-01-11 09:59:27 +00:00
Arnold Schwaighofer c2e9d759f2 LoopVectorizer: Handle strided memory accesses by versioning
for (i = 0; i < N; ++i)
   A[i * Stride1] += B[i * Stride2];

We take loops like this and check that the symbolic strides 'Strided1/2' are one
and drop to the scalar loop if they are not.

This is currently disabled by default and hidden behind the flag
'enable-mem-access-versioning'.

radar://13075509

llvm-svn: 198950
2014-01-10 18:20:32 +00:00
Chandler Carruth 8a8cd2bab9 Re-sort all of the includes with ./utils/sort_includes.py so that
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.

Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.

llvm-svn: 198685
2014-01-07 11:48:04 +00:00
Arnold Schwaighofer 50b8302c55 LoopVectorizer: Don't if-convert constant expressions that can trap
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.

PR16729
radar://15653590

llvm-svn: 197449
2013-12-17 01:11:01 +00:00
Renato Golin 729a3ae90a Add #pragma vectorize enable/disable to LLVM
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.

This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.

The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.

Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.

llvm-svn: 196537
2013-12-05 21:20:02 +00:00
Alp Toker f907b891da Correct word hyphenations
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.

llvm-svn: 196471
2013-12-05 05:44:44 +00:00
Arnold Schwaighofer a2c8e008d2 LoopVectorizer: Truncate i64 trip counts of i32 phis if necessary
In signed arithmetic we could end up with an i64 trip count for an i32 phi.
Because it is signed arithmetic we know that this is only defined if the i32
does not wrap. It is therefore safe to truncate the i64 trip count to a i32
value.

Fixes PR18049.

llvm-svn: 195787
2013-11-26 22:11:23 +00:00
Arnold Schwaighofer b72cb4ec49 LoopVectorizer: Extend the induction variable to a larger type
In some case the loop exit count computation can overflow. Extend the type to
prevent most of those cases.

The problem is loops like:
int main ()
{
  int a = 1;
  char b = 0;
  lbl:
    a &= 4;
    b--;
    if (b) goto lbl;
  return a;
}

The backedge count is 255. The induction variable type is i8. If we add one to
255 to get the exit count we overflow to zero.

To work around this issue we extend the type of the induction variable to i32 in
the case of i8 and i16.

PR17532

llvm-svn: 195008
2013-11-18 13:14:32 +00:00
Arnold Schwaighofer dbb7b87d7a LoopVectorizer: Use abi alignment for accesses with no alignment
When we vectorize a scalar access with no alignment specified, we have to set
the target's abi alignment of the scalar access on the vectorized access.
Using the same alignment of zero would be wrong because most targets will have a
bigger abi alignment for vector types.

This probably fixes PR17878.

llvm-svn: 194876
2013-11-15 23:09:33 +00:00
Renato Golin 3f67a7de36 Move debug message in vectorizer
No functional change, just better reporting.

llvm-svn: 194388
2013-11-11 16:27:35 +00:00
Benjamin Kramer 568a1cd9df LoopVectorize: Remove quadratic behavior the local CSE.
Doing this with a hash map doesn't change behavior and avoids calling
isIdenticalTo O(n^2) times. This should probably eventually move into a utility
class shared with EarlyCSE and the limited CSE in the SLPVectorizer.

llvm-svn: 193926
2013-11-02 13:39:00 +00:00
Arnold Schwaighofer d0789cdffe LoopVectorizer: Move cse code into its own function
llvm-svn: 193895
2013-11-01 23:28:54 +00:00