Summary:
- Use `device_builtin_surface` and `device_builtin_texture` for
surface/texture reference support. So far, both the host and device
use the same reference type, which could be revised later when
interface/implementation is stablized.
Reviewers: yaxunl
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77583
This is the second part loosely extracted from D71179 and cleaned up.
This patch provides semantic analysis support for `omp begin/end declare
variant`, mostly as defined in OpenMP technical report 8 (TR8) [0].
The sema handling makes code generation obsolete as we generate "the
right" calls that can just be handled as usual. This handling also
applies to the existing, albeit problematic, `omp declare variant
support`. As a consequence a lot of unneeded code generation and
complexity is removed.
A major purpose of this patch is to provide proper `math.h`/`cmath`
support for OpenMP target offloading. See PR42061, PR42798, PR42799. The
current code was developed with this feature in mind, see [1].
The logic is as follows:
If we have seen a `#pragma omp begin declare variant match(<SELECTOR>)`
but not the corresponding `end declare variant`, and we find a function
definition we will:
1) Create a function declaration for the definition we were about to generate.
2) Create a function definition but with a mangled name (according to
`<SELECTOR>`).
3) Annotate the declaration with the `OMPDeclareVariantAttr`, the same
one used already for `omp declare variant`, using and the mangled
function definition as specialization for the context defined by
`<SELECTOR>`.
When a call is created we inspect it. If the target has an
`OMPDeclareVariantAttr` attribute we try to specialize the call. To this
end, all variants are checked, the best applicable one is picked and a
new call to the specialization is created. The new call is used instead
of the original one to the base function. To keep the AST printing and
tooling possible we utilize the PseudoObjectExpr. The original call is
the syntactic expression, the specialized call is the semantic
expression.
[0] https://www.openmp.org/wp-content/uploads/openmp-TR8.pdf
[1] https://reviews.llvm.org/D61399#change-496lQkg0mhRN
Reviewers: kiranchandramohan, ABataev, RaviNarayanaswamy, gtbercea, grokos, sdmitriev, JonChesterfield, hfinkel, fghanim, aaron.ballman
Subscribers: bollu, guansong, openmp-commits, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75779
Summary:
- Even though the bindless surface/texture interfaces are promoted,
there are still code using surface/texture references. For example,
[PR#26400](https://bugs.llvm.org/show_bug.cgi?id=26400) reports the
compilation issue for code using `tex2D` with texture references. For
better compatibility, this patch proposes the support of
surface/texture references.
- Due to the absent documentation and magic headers, it's believed that
`nvcc` does use builtins for texture support. From the limited NVVM
documentation[^nvvm] and NVPTX backend texture/surface related
tests[^test], it's believed that surface/texture references are
supported by replacing their reference types, which are annotated with
`device_builtin_surface_type`/`device_builtin_texture_type`, with the
corresponding handle-like object types, `cudaSurfaceObject_t` or
`cudaTextureObject_t`, in the device-side compilation. On the host
side, that global handle variables are registered and will be
established and updated later when corresponding binding/unbinding
APIs are called[^bind]. Surface/texture references are most like
device global variables but represented in different types on the host
and device sides.
- In this patch, the following changes are proposed to support that
behavior:
+ Refine `device_builtin_surface_type` and
`device_builtin_texture_type` attributes to be applied on `Type`
decl only to check whether a variable is of the surface/texture
reference type.
+ Add hooks in code generation to replace that reference types with
the correponding object types as well as all accesses to them. In
particular, `nvvm.texsurf.handle.internal` should be used to load
object handles from global reference variables[^texsurf] as well as
metadata annotations.
+ Generate host-side registration with proper template argument
parsing.
---
[^nvvm]: https://docs.nvidia.com/cuda/pdf/NVVM_IR_Specification.pdf
[^test]: https://raw.githubusercontent.com/llvm/llvm-project/master/llvm/test/CodeGen/NVPTX/tex-read-cuda.ll
[^bind]: See section 3.2.11.1.2 ``Texture reference API` in [CUDA C Programming Guide](https://docs.nvidia.com/cuda/pdf/CUDA_C_Programming_Guide.pdf).
[^texsurf]: According to NVVM IR, `nvvm.texsurf.handle` should be used. But, the current backend doesn't have that supported. We may revise that later.
Reviewers: tra, rjmccall, yaxunl, a.sidorin
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76365
Passing small data limit to RISCVELFTargetObjectFile by module flag,
So the backend can set small data section threshold by the value.
The data will be put into the small data section if the data smaller than
the threshold.
Differential Revision: https://reviews.llvm.org/D57497
Summary:
- https://reviews.llvm.org/D68578 revises the `GlobalDecl` constructors
to ensure all GPU kernels have `ReferenceKenelKind` initialized
properly with an explicit constructor and static one. But, there are
lots of places using the implicit constructor triggering the assertion
on non-GPU kernels. That's found in compilation of many tests and
workloads.
- Fixing all of them may change more code and, more importantly, all of
them assumes the default kernel reference kind. This patch changes
that constructor to tell `CUDAGlobalAttr` and construct `GlobalDecl`
properly.
Reviewers: yaxunl
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76344
Summary:
[Clang] Attribute to allow defining undef global variables
Initializing global variables is very cheap on hosted implementations. The
C semantics of zero initializing globals work very well there. It is not
necessarily cheap on freestanding implementations. Where there is no loader
available, code must be emitted near the start point to write the appropriate
values into memory.
At present, external variables can be declared in C++ and definitions provided
in assembly (or IR) to achive this effect. This patch provides an attribute in
order to remove this reason for writing assembly for performance sensitive
freestanding implementations.
A close analogue in tree is LDS memory for amdgcn, where the kernel is
responsible for initializing the memory after it starts executing on the gpu.
Uninitalized variables in LDS are observably cheaper than zero initialized.
Patch is loosely based on the cuda __shared__ and opencl __local variable
implementation which also produces undef global variables.
Reviewers: kcc, rjmccall, rsmith, glider, vitalybuka, pcc, eugenis, vlad.tsyrklevich, jdoerfert, gregrodgers, jfb, aaron.ballman
Reviewed By: rjmccall, aaron.ballman
Subscribers: Anastasia, aaron.ballman, davidb, Quuxplusone, dexonsmith, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D74361
Most clients of SourceManager.h need to do things like turning source
locations into file & line number pairs, but this doesn't require
bringing in FileManager.h and LLVM's FS headers.
The main code change here is to sink SM::createFileID into the cpp file.
I reason that this is not performance critical because it doesn't happen
on the diagnostic path, it happens along the paths of macro expansion
(could be hot) and new includes (less hot).
Saves some includes:
309 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileManager.h
272 - /usr/local/google/home/rnk/llvm-project/clang/include/clang/Basic/FileSystemOptions.h
271 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/VirtualFileSystem.h
267 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/FileSystem.h
266 - /usr/local/google/home/rnk/llvm-project/llvm/include/llvm/Support/Chrono.h
Differential Revision: https://reviews.llvm.org/D75406
HIP emits a device stub function for each kernel in host code.
The HIP debugger requires device stub function to have a different unmangled name as the kernel.
Currently the name of the device stub function is the mangled name with a postfix .stub. However,
this does not work with the HIP debugger since the unmangled name is the same as the kernel.
This patch adds prefix __device__stub__ to the unmangled name of the device stub before mangling,
therefore the device stub function has a valid mangled name which is different than the device kernel
name. The device side kernel name is kept unchanged. kernels with extern "C" also gets the prefix added
to the corresponding device stub function.
Differential Revision: https://reviews.llvm.org/D68578
The initial implementation only did 'first declaration renaming' when
a default version came after. This is insufficient in cases where a
default does not exist, so this patch makes sure that we do the renaming
in all cases.
This renaming is necessary because we emit the first declaration before
knowing that it IS a target multiversion function, which would change
its name. The second declaration (the one that caused the
multiversioning) then needs to make sure that the first one has its name
changed to be consistent with the resolver usage.
Summary:
hip-pinned-shadow global var should remain in the final code object irrespective
of whether it is used or not within the code. Add it to used list, so that it
will not get eliminated when it is unused.
Reviewers: yaxunl, tra, hliao
Reviewed By: yaxunl
Subscribers: hliao, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D75402
WebAssembly enforces a rule that caller and callee signatures must
match. This means that the traditional technique of passing `main`
`argc` and `argv` even when it doesn't need them doesn't work.
Currently the backend renames `main` to `__original_main`, however this
doesn't interact well with LTO'ing libc, and the name isn't intuitive.
This patch allows us to transition to `__main_argc_argv` instead.
This implements the proposal in
https://github.com/WebAssembly/tool-conventions/pull/134
with a flag to disable it when targeting Emscripten, though this is
expected to be temporary, as discussed in the proposal comments.
Differential Revision: https://reviews.llvm.org/D70700
Summary:
Right now we annotate C++'s `operator new` with `noalias` attribute,
which very much is healthy for optimizations.
However as per [[ http://eel.is/c++draft/basic.stc.dynamic.allocation | `[basic.stc.dynamic.allocation]` ]],
there are more promises on global `operator new`, namely:
* non-`std::nothrow_t` `operator new` *never* returns `nullptr`
* If `std::align_val_t align` parameter is taken, the pointer will also be `align`-aligned
* ~~global `operator new`-returned pointer is `__STDCPP_DEFAULT_NEW_ALIGNMENT__`-aligned ~~ It's more caveated than that.
Supplying this information may not cause immediate landslide effects
on any specific benchmarks, but it for sure will be healthy for optimizer
in the sense that the IR will better reflect the guarantees provided in the source code.
The caveat is `-fno-assume-sane-operator-new`, which currently prevents emitting `noalias`
attribute, and is automatically passed by Sanitizers ([[ https://bugs.llvm.org/show_bug.cgi?id=16386 | PR16386 ]]) - should it also cover these attributes?
The problem is that the flag is back-end-specific, as seen in `test/Modules/explicit-build-flags.cpp`.
But while it is okay to add `noalias` metadata in backend, we really should be adding at least
the alignment metadata to the AST, since that allows us to perform sema checks on it.
Reviewers: erichkeane, rjmccall, jdoerfert, eugenis, rsmith
Reviewed By: rsmith
Subscribers: xbolva00, jrtc27, atanasyan, nlopes, cfe-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D73380
This PR enables "XL" C++ ABI in frontend AST to IR codegen. And it is driven by
static init work. The current kind in Clang by default is Generic Itanium, which
has different behavior on static init with IBM xlclang compiler on AIX.
Differential Revision: https://reviews.llvm.org/D74015
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
This reverts commit 39f50da2a3.
The -fstack-clash-protection is being passed to the linker too, which
is not intended.
Reverting and fixing that in a later commit.
Michael Liao
Eli Friedman
Artem Belevich
Johannes Doerfert
Shiva Chen
Jon Chesterfield
Reid Kleckner
Yaxun (Sam) Liu
Erich Keane
hsmahesha
Dan Gohman
Roman Lebedev
Xiangling Liao
serge_sans_paille
Nico Weber