A lot of comments in LLDB are surrounded by an ASCII line to delimit the
begging and end of the comment.
Its use is not really consistent across the code base, sometimes the
lines are longer, sometimes they are shorter and sometimes they are
omitted. Furthermore, it looks kind of weird with the 80 column limit,
where the comment actually extends past the line, but not by much.
Furthermore, when /// is used for Doxygen comments, it looks
particularly odd. And when // is used, it incorrectly gives the
impression that it's actually a Doxygen comment.
I assume these lines were added to improve distinguishing between
comments and code. However, given that todays editors and IDEs do a
great job at highlighting comments, I think it's worth to drop this for
the sake of consistency. The alternative is fixing all the
inconsistencies, which would create a lot more churn.
Differential revision: https://reviews.llvm.org/D60508
llvm-svn: 358135
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
In one of the 2 places the LC_BUILD_VERSION load command is handled, there
is a bug preventing us from actually handling them (the address where to
read the load command was not updated). This patch factors reading the
deployment target load commands into a helper and adds testing for the 2
code paths calling the helper.
The testing is a little bit complicated because the only times those load
commands matter is when debugging a simulator process. I added a new
decorator to check that a specific SDK is available. The actual testing was
fairly easy once I knew how to run a simulated process.
Reviewers: jasonmolenda, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45298
llvm-svn: 329374
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
to find the solibs loaded in a process. Support two new ways of
sending the jGetLoadedDynamicLibrariesInfos packet to debugserver
and add a new jGetSharedCacheInfo packet. Update the documentation
for these packets as well. The changes to lldb to use these will
be a separate commit.
<rdar://problem/25251243>
llvm-svn: 274718
previous release. Most of the diffs are duplication in the xcode
project file caused by adding a "debugserver-mini" target. Jim
Ingham added support for a new SPI needed to request app launches
on iOS. Greg Clayton added code to indicate the platform of the
binary (macosx, ios, watchos, tvos) based on Mach-O load commands.
Jason Molenda added code so debugserver will identify when it is
running on a tvos/watchos device to lldb.
llvm-svn: 251091
major, minor, and patchlevel in the qHostInfo reply.
Document that qHostInfo may report major/minor/patch
separately / in addition to the version: combination.
<rdar://problem/22125465>
llvm-svn: 244716
system, make a couple of additional checks to see if the
attach was denied via the System Integrity Protection that
is new in Mac OS X 10.11. If so, return a special E87
error code to indicate this to lldb.
Up in lldb, if we receive the E87 error code, be specific
about why the attach failed.
Also detect the more common case of general attach failure
and print a better error message than "lost connection".
I believe this code will all build on Mac OS X 10.10 systems.
It may not compile or run on earlier versions of the OS.
None of this should build on other non-darwin systems.
llvm-svn: 243511
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
A "qSymbol::" is sent when shared libraries have been loaded by hooking into the Process::ModulesDidLoad() function from within ProcessGDBRemote. This function was made virtual so that the ProcessGDBRemote version is called, which then first calls the Process::ModulesDidLoad(), and then it queries for any symbol lookups that the remote GDB server might want to do.
This allows debugserver to request the "dispatch_queue_offsets" symbol so that it can read the queue name, queue kind and queue serial number and include this data as part of the stop reply packet. Previously each thread would have to do 3 memory reads in order to read the queue name.
This is part of reducing the number of packets that are sent between LLDB and the remote GDB server.
<rdar://problem/21494354>
llvm-svn: 240466
We know have on API we should use for all XML within LLDB in XML.h. This API will be easy back the XML parsing by different libraries in case libxml2 doesn't work on all platforms. It also allows the only place for #ifdef ...XML... to be in XML.h and XML.cpp. The API is designed so it will still compile with or without XML support and there is a static function "bool XMLDocument::XMLEnabled()" that can be called to see if XML is currently supported. All APIs will return errors, false, or nothing when XML isn't enabled.
Converted all locations that used XML over to using the host XML implementation.
Added target.xml support to debugserver. Extended the XML register format to work for LLDB by including extra attributes and elements where needed. This allows the target.xml to replace the qRegisterInfo packets and allows us to fetch all register info in a single packet.
<rdar://problem/21090173>
llvm-svn: 238224
to the remote side (QStartNoAckMode) - it may take a little longer
than normal to get a reply.
In debugserver, hardcode the priority for several threads so they
aren't de-prioritized when a user app is using system resources.
Also, set the names of the threads.
<rdar://problem/17509866>
llvm-svn: 213828
Jonas Devlieghere
Chandler Carruth
Frederic Riss
Jason Molenda
Kate Stone
Todd Fiala
Saleem Abdulrasool
Bruce Mitchener
Greg Clayton
Jim Ingham