This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
This is better for a number of reasons. Mostly style, but also:
1) Signed-unsigned comparison warnings disappear since there is
no loop index.
2) Iterating with the range-for style gives you back an entry
that has more than just a const char*, so it's more efficient
and more useful.
3) Makes code safter since the type system enforces that it's
impossible to index out of bounds.
llvm-svn: 283413
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
Summary: Flag updated in D233237
Reviewers: spyffe, jingham, Eugene.Zelenko
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18660
Change by Francis Ricci <fjricci@fb.com>
llvm-svn: 265421
Summary:
This removes all uses of virtual on functions
where override could be used, including on destructors.
It also adds override where virtual was previously
missing.
Reviewers: clayborg, labath
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13503
llvm-svn: 249564
Create a new "lldb_private::CompilerDeclContext" class that will replace all direct uses of "clang::DeclContext" when used in compiler agnostic code, yet still allow for conversion to clang::DeclContext subclasses by clang specific code. This completes the abstraction of type parsing by removing all "clang::" references from the SymbolFileDWARF. The new "lldb_private::CompilerDeclContext" class abstracts decl contexts found in compiler type systems so they can be used in internal API calls. The TypeSystem is required to support CompilerDeclContexts with new pure virtual functions that start with "DeclContext" in the member function names. Converted all code that used lldb_private::ClangNamespaceDecl over to use the new CompilerDeclContext class and removed the ClangNamespaceDecl.cpp and ClangNamespaceDecl.h files.
Removed direct use of clang APIs from SBType and now use the abstract type systems to correctly explore types.
Bulk renames for things that used to return a ClangASTType which is now CompilerType:
"Type::GetClangFullType()" to "Type::GetFullCompilerType()"
"Type::GetClangLayoutType()" to "Type::GetLayoutCompilerType()"
"Type::GetClangForwardType()" to "Type::GetForwardCompilerType()"
"Value::GetClangType()" to "Value::GetCompilerType()"
"Value::SetClangType (const CompilerType &)" to "Value::SetCompilerType (const CompilerType &)"
"ValueObject::GetClangType ()" to "ValueObject::GetCompilerType()"
many more renames that are similar.
llvm-svn: 245905
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
Debugger.h is a huge file that gets included everywhere, and
FormatManager.h brings in a ton of unnecessary stuff and doesn't
even use anything from it in the header.
llvm-svn: 231161
Summary:
Presently Args::SetCommandString allows quotes to be escaped with backslash. However, the
backslash itself is not removed from the argument, nor there is a way to escape the backslash
itself. This leads to surprising results:
"a b" c" -> 'a b', 'c' # Here we actually have an unterminated quote, but that is ignored
"a b\" c" -> 'a b\" c' # We try to escape the quote. That works but the backslash is not removed.
"a b\\" c" -> 'a b\\" c' # Escaping the backslash has no effect.
This change changes quote handling to be more shell-like:
- single quotes and backquotes are literal and there is no way to escape the closing quote or
anything else inside;
- inside double quotes you can use backslash to escape the closing quote and another backslash
- outside any quotes, you can use backslash to escape quotes, spaces and itself.
This makes the parsing more consistent with what the user is familiar and increases the
probability that pasting the command line from shell to the "process launch" command "just work".
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7855
llvm-svn: 230955
Zachary Turner
Pavel Labath
Kate Stone
Todd Fiala
Saleem Abdulrasool
Stephane Sezer
Eugene Zelenko
Bruce Mitchener
Greg Clayton
Enrico Granata