Gerard Marull-Paretas e70e2fe4df samples: basic: blinky_pwm: delete overlay with LEDs not on board ...

Samples should run on a board if they have the peripheral connected, in
this case, if any LED on the board is connected to a PWM output. A
shield could be used to demonstrate a sample on a board that doesn't
have the required peripheral. In this case, it was also unclear where
that "external LED" had to be connected, unless one checks where channel
1 for PWM1 is routed to. All board LEDs are connected to pins that
cannot be driven by PWM.

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>

2022-04-07 09:35:16 +02:00

..

blinky

samples: blinky: use a gpio_dt_spec

2022-02-04 11:20:46 +01:00

blinky_pwm

samples: basic: blinky_pwm: delete overlay with LEDs not on board

2022-04-07 09:35:16 +02:00

button

cmake: increase minimal required version to 3.20.0

2021-08-20 09:47:34 +02:00

fade_led

samples: fade_led/blinky_pwm: add pwm-leds compat check to filter

2022-04-07 09:35:16 +02:00

minimal

samples: Take into account PINCTRL in minimal configurations

2021-12-21 18:30:35 +01:00

rgb_led

cmake: increase minimal required version to 3.20.0

2021-08-20 09:47:34 +02:00

servo_motor

cmake: increase minimal required version to 3.20.0

2021-08-20 09:47:34 +02:00

threads

cmake: increase minimal required version to 3.20.0

2021-08-20 09:47:34 +02:00

basic.rst

…