Anas Nashif ecf96d2cfa arduino 101: make factory bootloader config the default ...

The Arduino 101 comes with a bootloader that supports DFU
and flashing of all cores using the dfu-util package.

This changes the memory layout of the image built for the
Arduino 101 and remove previous work-arounds to allow booting,
including the version-header section in the linker script.

The bootloader expects the text section at +0x30 from the physical
load address and thus requires special treatment in the linker
script.

Other changes by Andrew Boie:
The flash size parameters were both wrong. X86 side has 192K
of flash from 0x4003000 - 0x40060000, the entire span of
sys_flash1.

ARC side is now the span from 0x40010000 - 0x40030000, 128K.

Change-Id: Iecfa5d2b84a3f522d9eca06268d6b8b71a094aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>

2016-09-17 11:13:59 +00:00

..

debug

x86: improve exception APIs

2016-07-28 18:13:24 +00:00

generated

unified/build: allow building the unified kernel

2016-09-13 17:12:55 -04:00

cpp_ctors.c

build: Add C++ support

2016-02-05 20:25:23 -05:00

cpp_dtors.c

build: Add C++ support

2016-02-05 20:25:23 -05:00

cpp_init_array.c

build: Add C++ support

2016-02-05 20:25:23 -05:00

cpp_virtual.c

build: Add C++ support

2016-02-05 20:25:23 -05:00

cpp_vtable.cpp

build: Add C++ support

2016-02-05 20:25:23 -05:00

Kconfig

arduino 101: make factory bootloader config the default

2016-09-17 11:13:59 +00:00

Makefile

build: Add C++ support

2016-02-05 20:25:23 -05:00

printk.c

printk: make _char_out globally accessible

2016-08-28 07:47:28 -04:00

reboot.c

reboot: add reboot infrastructure

2016-02-05 20:24:43 -05:00