... to avoid undesirable delays in waking up of the threads on
scheduled timeouts. In specific configurations such additional load
of the CPU can be even harmful to the test. This was observed for
nRF platforms where the UART_NRF_DK_SERIAL_WORKAROUND Kconfig option
was enabled.
All calls to TC_PRINT() in this test suite are replaced with calls to
LOG_DBG(), so the status messages are not printed by default, but they
can be enabled if needed by changing CONFIG_LOG_DEFAULT_LEVEL.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In the message reporting the wrong order of woken up threads
(e.g. "thread 3 woke up, expected 2"), provide indexes of
the threads in the timeout order array, not their timeout
order values.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds mimxrt595_evk_cm33 target to the exclusion list for tests
as this board enabled i2c by default for regulator usage which
conflicts with the test.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Declarations for `getopt()` should be in `<unistd.h>`
according to the spec. The extended versions `getopt_long()`
and `getopt_long_only()` are declared in `<getopt.h>`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Update the relevant tests in basicmath to use the dsp subsystem. Note
that f16 is not updated since it's much more architecture specific and
did not become a part of zdsp.
Signed-off-by: Yuval Peress <peress@google.com>
Simple test for API rules, allocation, queue, and dequeu
of the endpoint requests. USB device controller should not be
connected to the host as this state is not covered by this test.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commits extracts mesh, gat, gap, l2cap from
bttester.h into corresponding header files for
better readability.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
When dealing with groups, the specified window in
linear_range_group_get_win_index can span across multiple groups. In the
current implementation, if maximum value was not in the same sub-window
as the minimum value the function would return -EINVAL. This patch fixes
the problem and updates test cases to cover such scenario.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Re-enable the CAAM for entropy
now that the HAL driver has been fixed
Job descriptors must be accessed coherently
between CAAM DMA and core.
The M4 Cores still do not work
because of mpu/cache/kconfig arch complications,
disable caam for M4 cores in DTS
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add a Kconfig option to put the buffer for random numbers
in the nocache region instead of on the stack.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
The underlying Kconfig setting NET_BUF_USER_DATA_SIZE is not used anywhere,
so this define is removed here.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Configure through an overlay file, the stm32f3_disco board
for running the tests/drivers/spi/spi_loopback.
The SPI1 is selected: MOSI/MISO output pins are available
on the board.
Connect pin PA6 & PA7 of connector P1 to PASS the test.
Add the spi_loopback fixture.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure through an overlay file, the nucleo_l152re board
for running the tests/drivers/spi/spi_loopback with DMA.
Limit the spi speed freq to run the test correctly.
The SPI1 is selected: MOSI/MISO output pins are available on the platform.
DMA1 channel 2 & 3 are selected for SPI1.
Connect pin D11 & D12 of CN5 to PASS the test.
Add the spi_loopback fixture.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The test was broken by changes made in
9d175ca5f1 (device ready check was
commented before). Also removed redundant preconditions check, since it
is already done in the test.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Drop the async enable function. This feature is rarely/never used,
complicates driver design, and doesn't really follow the sync/async API
design/naming used in other areas. In the future we can introduce
regulator_enable_async if needed, with support from the driver class (no
onoff). Note that drivers like PCA9420 did not implement any
asynchronous behavior. regulator-fixed implemented in the past
asynchronous behavior using work queues, an overkill for most GPIO
driven regulators. Let's keep things simple for now and extend the API
when needed, based on specific usecases.
In the current implementation, reference counting is managed by the
driver class. \isr-ok attribute is dropped, since calls are potentially
blocking. Note that drivers like PCA9420 already violated such rule.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove regulator-fixed-sync specialization, create a single driver that
is always synchronous. The asynchronous part is rarely/never used, so
let's keep things simple for now.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Unit test project for bt_keys_find_addr().
This part of subsys/bluetooth/host/keys.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
Enable counter_basic_api test for s32z270dc2_r52 boards, using
System Timer counter instances with different prescaler values.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
