Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add a kconfig symbol to control the mbedtls option
`MBEDTLS_AES_FEWER_TABLES`. 6KiB is a not insignificant ROM/RAM savings,
and the extra arthmetic is quite reasonable.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix help text for crypto key module functionality, which is included
in the source file of crypto_key_management.c source file.
The crypto_key.c source file contains generic code that is always
included.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update trusted-firmware-m to 1.8.0, mbedtls to 3.4.0, and tf-m-tests to
1.8.0. Includes minor cmake changes due to file renames and such, as well
as adjusting the return type of a callback function that has changed since
the previous version of trusted-firmware-m.
Signed-off-by: David Brown <david.brown@linaro.org>
The ILPS22QS sensor cannot be enabled unless USE_STDC_ILPS22QS is defined.
This PR fixes#57825 add adds the missing item in Kconfig.st file.
Signed-off-by: Raoul Rubien <rubienr@sbox.tugraz.at>
This commit replaces direct entropy device driver class with
`sys_csrand_get`, which is recommended way of getting crypto
secure random buffer.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
nRF USBD ISOINCONFIG register controls USBD behavior after receiving IN
token addressed to ISO IN endpoint when the endpoint was not armed with
data. The options are:
* NoResp, in which case there is no response (i.e. bus timeout)
* ZeroData, in which case device responds with ZLP
This commit both makes the ISOINCONFIG value configurable and changes
the default from NoResp to ZeroData. For reference, DWC_otg controller
will always send ZLP in such case and does not have NoResp equivalent.
Automatically sending ZLP when ISO IN endpoint is not armed resolves
periodic audio dropouts observed on Mac OS with USB Audio headset
sample. Apple USB Audio class driver will attempt recovery (abort all
pending URBs, switch to alternate config 0, switch to active alternate
config and submit new URBs) every time it sees kIOReturnNotResponding
status code. During recovery no audio data can be transferred and
therefore there are gaps in the audio stream.
Apple USB Audio driver sees kIOReturnNotResponding when there is bus
timeout (i.e. IN token was sent to nRF when the endpoint was not armed
and NoResp option was active). Activating ZeroData option results in
perfectly fine (albeit short) packet that does not trigger interface
recovery and thus fixes the USB Audio issues on Mac OS.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Fix board selection for Musca B1 board.
The platform path in TF-M was changed in the TF-M 1.7.0 update.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
- This includes the driver, test app, and sample app
- Only the boards\arm\xmc47_relax_kit board is supported for now
Signed-off-by: Bill Waters <bill.waters@infineon.com>
The IEEE 802.15.4 stack defines radio API helpers that provide
simplified and encapsulated access to radio API features.
These helpers were missing the `_radio_` infix. This infix is introduced
to clearly distinguish between MAC and PHY concerns. While PHY features
may be shared between L2 implementations (including the functions
concerned here), this is not true for MAC features.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Some NXP S32 devices share common harwdware blocks with other non-S32
devices which are already supported using MCUX-based drivers. In order
to leverage existing support, allow to build with MCUX enabled for NXP
S32 family.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
SYS_INIT() requires pointer to function that takes `void` now, instead of
pointer to device structure. Since the commit was developed before that
switch, it still invoked it with NULL. Fix that now.
Fixes:
zephyr/modules/mbedtls/zephyr_init.c: In function 'mbedtls_init':
zephyr/modules/mbedtls/zephyr_init.c:108:16: error: too many arguments \
to function '_mbedtls_init'
108 | return _mbedtls_init(NULL);
| ^~~~~~~~~~~~~
zephyr/modules/mbedtls/zephyr_init.c:86:12: note: declared here
86 | static int _mbedtls_init(void)
|
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add a config flag to enable conditional mbebtls
initialization at startup, defaulting to enabled.
Also add a function, mbedtls_init(), that should be
called by platforms that wish to initialise mbedtls
at a time of their choosing.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
Signed-off-by: Dave Aldridge <quic_daldridg@quicinc.com>
These are referenced by the "x module not available" message in
modules/Kconfig, but were only defined in the module, were generating an
undefined symbol warning when running CI compliance with no modules.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The RTT backend of the shell does not support several of the more
advanced terminal features. This commit proposes to inactivate these
features by default when RTT is selected as shell backend.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
