In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zeroing the BSS and copying data to RAM with regular memset/memcpy may
cause problems when those functions are assuming a fully initialized
system for their optimizations to work e.g. some instructions require
an active MMU, but turning the MMU on needs the .bss section to be
cleared first, etc.
Commit c5b898743a ("aarch64: Fix alignment fault on z_bss_zero()")
provides a detailed explanation of such a case.
Replacing z_bss_zero() with an architecture specific one is problematic
as the former may see new sections added to it that would be missed by
the later. The same reasoning goes for z_data_copy().
Let's make maintenance much easier by providing weak versions of
memset/memcpy that can be overridden by architecture-specific safe
versions when needed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Extracting stack usage calculation from k_thread_stack_space_get to
z_stack_space_get so it can be used also for interrupt stack.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Storing the state where this is the first GDB break can be done
in the main GDB stub code. There is no need to store the state
in architecture layer.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of returning PM_STATE_ACTIVE for when the cpu didn't enter a
low power state and a different state when it entered, but has
already left the state and is active again, it changes
pm_system_suspend to return true when the cpu has entered a low power
state and false otherwise.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a SOC API to allow for application control over deep idle power
states. Note that the hardware idle entry happens out of the WAITI
instruction, so the application has to be responsibile for ensuring
the CPU to be halted actually reaches idle deterministically. Lots of
warnings in the docs to this effect.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
During boot process, the boot sections need to be pinned in
memory to prevent them from being paged out (to avoid
pages being paged out and immediately paged in again).
Once the boot process is completed (just before calling main()),
the boot sections can be unpinned so the memory can be
used for demand paging for paging in data pages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
z_smp_init() is only available if CONFIG_SMP is defined,
smp_timer_init() also depends on two Kconfig parameters. Also make it
conditional in cavs_timer.c. Also clarify some SMP-related comments
there.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The z_interrupt_stacks was declared extern in the kernel internal
header file using the same macro which defines the same stack
array but with an added "extern" in front. This macro adds
alignment and section attribute which are actually not the same
as the actual stack array defined in kernel/init.c. The section
name used in the section attribute contains the file name where
the stack array is defined or extern declared. So the same
symbol, in this case z_interrupt_stacks, has different
attributes in two places, and GCC 11 starts to complain about
this. So use the newly introduced macro to extern declare
the stack array without adding/replacing any symbol attributes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary bits for linker scripts and source code
to specify which symbols need to be pinned in memory. This is
needed for demand paging as some functions and data must reside
in memory all the time and cannot be paged out (e.g. paging,
scheduler, and interrupt routines for functionality).
This is up to the arch/SoC/board to define the sections in
their linker scripts as the pinned section may need special
alignment which cannot be done in common script snippets.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary bits for linker scripts and source code
to specify which symbols are needed for boot process so they
can be grouped together.
One use of this is to group boot related code and data so these
won't interval with other kernel and application for better
caching.
This is a must for demand paging as some functions and data
must be available during the boot process and before the memory
manager is initialized. During this time, paging cannot be used
so symbols linked in virtual memory space are unavailable.
This is up to the arch/SoC/board to define the sections in
their linker scripts as section may need special alignment
which cannot be done in common script snippets.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Due to the use of gperf to generate hash table for kobjects,
the addresses of these kobjects cannot change during the last
few phases of linking (especially between zephyr_prebuilt.elf
and zephyr.elf). Because of this, the gperf generated data
needs to be placed at the end of memory to avoid pushing symbols
around in memory. This prevents moving these generated blocks
to earlier sections, for example, pinned data section needed
for demand paging. So create placeholders for use in
intermediate linking to reserve space for these generated blocks.
Due to uncertainty on the size of these blocks, more space is
being reserved which could result in wasted space. Though, this
retains the use of hash table for faster lookup.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to record execution time of eviction selection,
and backing store page-in/page-out in histograms.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
pm_system_suspend is called only from the idle thread and should
not be exported as a public API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a newer, much smaller and simpler implementation of abort and
join. No need to involve the idle thread. No need for a special code
path for self-abort. Joining a thread and waiting for an aborting one
to terminate elsewhere share an implementation. All work in both
calls happens under a single locked path with no unexpected
synchronization points.
This fixes a bug with the current implementation where the action of
z_sched_single_abort() was nonatomic, releasing the lock internally at
a point where the thread to be aborted could self-abort and confuse
the state such that it failed to abort at all.
Note that the arm32 and native_posix architectures, which have their
own thread abort implementations, now see a much simplified
"z_thread_abort()" internal API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove duplication in the code by moving macro LOCKED() to the correct
kernel_internal.h header.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Initialize all device objects in a batch before invoking any code that
might try to reference data in them. This eliminates a race condition
enabled by the ability to resolve a device structure at build time,
and reference it from one device's initialization routine before the
device itself has been initialized.
While the device is pulled from the sys_init records rather than
static devices, all in-tree init_entry records that are associated
with devices are produced via Z_DEVICE_DEFINE(), so there should be no
static devices that would be missed by instead iterating over the
device records.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
