Remove the config BOOT_TIME_MEASUREMENT and corresponding #ifdef'd code
throughout (kernel/init.c, idle.c, core/common.S , reset.S, ... ) which
hold the extern hooks for z_timestamp_main and z_timestamp_idle in the
removed boot_time test suite.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Due to the use of gperf to generate hash table for kobjects,
the addresses of these kobjects cannot change during the last
few phases of linking (especially between zephyr_prebuilt.elf
and zephyr.elf). Because of this, the gperf generated data
needs to be placed at the end of memory to avoid pushing symbols
around in memory. This prevents moving these generated blocks
to earlier sections, for example, pinned data section needed
for demand paging. So create placeholders for use in
intermediate linking to reserve space for these generated blocks.
Due to uncertainty on the size of these blocks, more space is
being reserved which could result in wasted space. Though, this
retains the use of hash table for faster lookup.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to record execution time of eviction selection,
and backing store page-in/page-out in histograms.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
pm_system_suspend is called only from the idle thread and should
not be exported as a public API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add a newer, much smaller and simpler implementation of abort and
join. No need to involve the idle thread. No need for a special code
path for self-abort. Joining a thread and waiting for an aborting one
to terminate elsewhere share an implementation. All work in both
calls happens under a single locked path with no unexpected
synchronization points.
This fixes a bug with the current implementation where the action of
z_sched_single_abort() was nonatomic, releasing the lock internally at
a point where the thread to be aborted could self-abort and confuse
the state such that it failed to abort at all.
Note that the arm32 and native_posix architectures, which have their
own thread abort implementations, now see a much simplified
"z_thread_abort()" internal API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove duplication in the code by moving macro LOCKED() to the correct
kernel_internal.h header.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Initialize all device objects in a batch before invoking any code that
might try to reference data in them. This eliminates a race condition
enabled by the ability to resolve a device structure at build time,
and reference it from one device's initialization routine before the
device itself has been initialized.
While the device is pulled from the sys_init records rather than
static devices, all in-tree init_entry records that are associated
with devices are produced via Z_DEVICE_DEFINE(), so there should be no
static devices that would be missed by instead iterating over the
device records.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Page tables created at build time may not include the
gperf data at the very end of RAM. Ensure this is mapped
properly at runtime to work around this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to gather the first thread runtime statictic:
thread execution time. It provides a rough idea of how much time
a thread is spent in active execution. Currently it is not being
used, pending following commits where it combines with the trace
points on context switch as they instrument the same locations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Strictly speaking, any access to a mem domain or its
containing partitions should be serialized on this lock.
Architecture code may need to grab this lock if it is
using this data during, for example, context switches,
especially if they support SMP as locking interrupts
is not enough.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When threads exited we were leaving dangling references to
them in the domain's mem_domain_q.
z_thread_single_abort() now calls into the memory domain
code via z_mem_domain_exit_thread() to take it off.
The thread setup code now invokes z_mem_domain_init_thread(),
avoiding extra checks in k_mem_domain_add_thread(), we know
the object isn't currently a member of a doamin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It implements gdb remote protocol to talk with a host gdb during the
debug session. The implementation is divided in three layers:
1 - The top layer that is responsible for the gdb remote protocol.
2 - An architecture specific layer responsible to write/read registers,
set breakpoints, handle exceptions, ...
3 - A transport layer to be used to communicate with the host
The communication with GDB in the host is synchronous and the systems
stops execution waiting for instructions and return its execution after
a "continue" or "step" command. The protocol has an exception that is
when the host sends a packet to cause an interruption, usually triggered
by a Ctrl-C. This implementation ignores this instruction though.
This initial work supports only X86 using uart as backend.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This now takes a stack pointer as an argument with TLS
and random offsets accounted for properly.
Based on #24467 authored by Flavio Ceolin.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
