Add simple application to demonstrate quadrature decoder sensor.
Tested on Atmel SMART SAM E70 Xplained board.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This sample application periodically reads raw data from the FDC2X1X
sensor in polling mode or optionally with data ready trigger.
It is able to read the 12-Bit and 28-Bit, as well as the 2-Channel
and 4-Channel versions (FDC2112, FDC2114, FDC2212, FDC2214).
The 4-channel versions are chosen through devicetree properties.
The default is FDC2112.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
Set integration_platforms on these samples to just frdm_k64f.
This should be sufficient to make sure these tests build.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I only see one sample with an overlay using the now legacy sda-pin and
scl-pin properties. Move it to the new style.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adjust the documentation and devicetree overlays so the sample can be
built for any board with an Arduino I2C and SPI pinout, defaulting I2C
and SPI to y to make it easier to switch between the two without
requiring a pristine build.
The user has to choose an appropriate overlay or have a sensor built
in to the board.
Use the newly introduced DEVICE_DT_GET_ANY() in main.c to ask for a
bosch,bme280 without worrying over the details or exposing
DT_DRV_COMPAT-based functionality that is really meant for drivers.
Remove the no-longer-needed board specific overlay for nRF52840 DK;
this is covered by the generic Arduino overlays now.
Fix the datasheet link while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a sample application to test MAX6675 cold-junction-compensated
K-thermocouple to digital converter.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Introduce a dts board overlay on the nucleo_l053r8 board as this
board was used for testing addition of resolution setting on the
mcp9808 sensor driver.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
Add sample code which demostrates the use of the offset
register offered in the TMP117.
Also add information about tmp117 in README.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Add a sample for demonstrating the usage of the NXP MCUX Analog
Comparator (ACMP) sensor driver. The sample currently only supports the
NXP TWR-KE18F development board.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add sample application for sensor lsm6dso. This sample has been
tested on stm32l562e_dk board, where lsm6dso is connect to I2C bus.
Signed-off-by: Yestin Sun <sunyi0804@gmail.com>
Enables the magnetic vector magnitude function in the fxos8700 sensor
sample application to ensure it builds in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts fxos8700 power mode options (normal, low noise low power, high
resolution, low power) from Kconfigs to an optional device tree
property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
