Use the set of headers that the TF-M build system places in the
install output. Not all public header files are available in the
interface/include directory and the TF-M build system uses the install
mechanism of cmake to include additional headers based on platform
or configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Lora samples are missing harnesses and hence are reported
failed by default by twister.
Add required harnesses to be able to detect correct and faulty
test executions.
Fixes#42159
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The ip_k66f doesn't have I2C_0 status set to OKAY so the build of
this sample generates warnings in the nightly build. Root problem
is that the groove display is not ported to the device tree so
there isn't a standard way of filtering on the display being
part of the platform.
fixes#41523
Signed-off-by: David Leach <david.leach@nxp.com>
Increase minimum RAM requirements on this test as it appears
that 32 is too low and 40 is verified ok.
Fixes#42161
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When moving the samples to samples/modules the example code was not
updated accordingly.
Fixes: 613f1cde4a
Signed-off-by: Moritz Fischer <moritzf@google.com>
The CAN_BUS_UNKNOWN CAN controller state is only used to indicate that
the current CAN controller state could not be read.
Remove it and change the signature of the can_get_state() API function
to return an integer indicating success or failure.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Adds Basic Audio Profile (BAP) unicast server and client samples.
These are the barebones versions of what is needed to scan/advertise
for audio and setup a stream using the mandatory LC3 preset defined by
the BAP spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add reference to specific CONFIG_BT_CTLR_ Kconfig options
for the ISO samples. This is due to the fact that ISO
isn't fully supported in the Zephyr controller yet, and
won't be enabled by default for a while yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For tracing_user, the sys_trace_isr_enter() & sys_trace_isr_exit()
block any nest interrupts & most SMP interrupts for the user. It is
hard to analyze the IRQ preemption(e.g., each IRQ counter and execution
time). This commit adds ISR nest level for each CPU to the user instead
of blocking user call back when nest interrupts.
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Remove the only_tags filter for the board and add ignore_tags for net
and bt.
Adds a filter to a userspace sample that didn't correctly filter on
usermode being Kconfiged.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add a check for SDU size and tx qos to ensure that we do not
attempt to send any data and neither central or peripheral
if the benchmark has been setup to be rx-only.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Periodic advertising synchronization create had a timeout set
to fixed value of 10 seconds. BT 5.3 Core specification defines
synchronization timeout as 6 consecutive periodic advertising
events. When advertiser set the periodic interval to be more than
1.6 second it was possible the application timeout is reached
before time allowed by BT Core specification.
Changed implementation of timeout to depend on the periodic
advertising interval.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new sample application for direction finding to show
how the functionality works in connected mode for peripheral role.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new sample application for direction finding to show
how the functionality works in connected mode for central role.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add sample which demonstrates how RTC clocks are synchronized
between application and network core.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a simple sample that tries to answer the silly question: how fast
can I move data from one core to another using OpenAMP?
It depends on a lot of factors but at least we can use this sample as a
skeleton to build tests on top.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
In order to align with macros used to obtain a device reference (e.g.
DEVICE_DT_GET), align the PM macros to use "GET" instead of "REF". This
change should have low impact since no official release has gone out yet
with the "REF" macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Following the work done to add TFM support on b_u585i_iot02a,
update other STM32 TFM enabled boards to benefit from the
progress made on TFM flashing instructions.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Disable Ethernet on SocketCAN sample because some Ethernet
drivers cannot operate on such small buffers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
