This commit fixed Openthread kconfig option to use correct value and
description of units.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Similar to the changes made in #48048, compile in the appropriate lora
modem driver when `CONFIG_LORA=y`. The `LORA_SX12XX` symbol has no
use now so remove. LoRa and LoRaWAN subsystems are still marked as
unstable so no additional deprecation cycle is needed.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move tfm_merged.hex from <build>/tfm_merged.hex to
<build>/zephyr/tfm_merged.hex.
Use relative path to the runners.yaml hex file.
This makes it possible to move the build folder.
Example would be to copy out the runners.yaml and tfm_merged.hex file
and still be able to call west flash --skip-rebuild.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
- Added Cmakefiles for modules\hal_infineon\btstack-integration\,
where handle generation of Bluetooth include blob from HCD binary.
- Supported following device/modules:
-- CYW43012/MURATA-1LV module
-- CYW4343W/MURATA-1DX module
-- CYW43439/MURATA-1YN module
-- CYW4373/STERLING-LWB5plus module
- Added possibility to use user provided BT Firmware HCD file via
kconfig (path must be defined in
CONFIG_CYW43XX_CUSTOM_FIRMWARE_HCD_BLOB)
- Updated top makefile
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Enable DMA driver.
Add the path of the DMA driver header into include paths.
`hardware_claim` is depends by DMA driver, also enable it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Product URL: https://www.ti.com/product/CC1352P7
Datasheet : https://www.ti.com/lit/ds/symlink/cc1352p7.pdf
Features:
Powerful 48-MHz Arm® Cortex®-M4F processor
* 704KB flash program memory
* 256KB of ROM for protocols and library functions
* 8KB of cache SRAM
* 144KB of ultra-low leakage SRAM with parity for
high-reliability operation
* Dual-band Sub-1 GHz and 2.4 GHz operation
Updates:
* Remove CC1352P7_LaunchXL due to compliance checks
* Add CC1352P7 updates
* Update hal_ti for CC1352P7 support
* Remove blank line at end of modules/Kconfig.simplelink
* Split struct and typedef for pinctrl_soc_pin/pinctrl_soc_pin_t
* Reference cc13x2_cc26x2/pinctrl_soc.h
* Reference cc13x2_cc26x2/soc.h
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
OPENTHREAD_CONFIG_TCP_ENABLE is now set by the OpenThread build system,
based on the CONFIG_OPENTHREAD_CLI_TCP_ENABLE Kconfig entry.
Setting this symbol in the config file is therefore redundant, and
causes multiple build warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The build will fail if `gpio1` is disabled in an overlay.
For example:
```
&gpio1 {
status = "disabled";
};
```
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
Add check in CMake files to prevent resource overlap for
TIMER0, TIMER1, RTC0.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In general, RTC and TIMER driver implements counter API but there
are exception when those peripherals are used in a custom way
(e.g. for system timer or bluetooth). In that case, system must
prevent using counter based on a reserved instance. Previously,
it was managed by Kconfig options but that cannot be maintained
when switching to devicetree configuration of the counter driver.
A new approach removes Kconfig options and instead adds static
asserts in the files which are using direct peripherals. Those
asserts check if given node is not enabled in the device tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit enables zephyr to configure the FatFs FF_FS_REENTRANT
option and support fs actions from multiple threads.
CONFIG_FS_FATFS_REENTRANT enables the option and provides zephyr
mutex wrappers.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes an issue where thread preemption was not being disabled
correctly, failing to taking into account MetaIRQ, which can be
used to preempt any cooperative thread.
The updated code sets the current thread to `K_HIGHEST_THREAD_PRIO`
before calling the secure function, and restores the thread priority
level once secure execution has terminated, allowing the thread
to be preempted once again.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Adding an Openthread radio API `otPlatRadioSetMacFrameCounterIfLarger`
implementation and the corresponding call to the IEEEE802154 driver.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Przemyslaw Bida
Mariusz Poslinski
Jordan Yates
Joakim Andersson
Nazar Palamar
TOKITA Hiroshi
Vaishnav Achath
Robert Lubos
Francois Gervais
Krzysztof Chruscinski
Nicola Ochsenbein
Vidar Lillebø
Jamie McCrae
Kevin Townsend
Andriy Gelman
Michał Barnaś
Sylvio Alves