Add a k_usleep() in test_timer_duration_period test to align ticks
before starting the timer. This fixes some rare off-by-1 failures.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move init_timer_data() out of k_usleep() tick alignment.
Compute rem_ticks just after busy_wait_ms() to avoid slew
due to 'now' and 'rem_ms' computations.
With slow CPU 32MHz: -2 Ticks.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Insert k_usleep(1) just before k_timer_start()
to guaranty tick alignment for step "test_timer_k_define"
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add new test cases for timer to improve testing infrastructure.
Add different waiting time in existing cases. For new test cases,
restart timer and check for status of timer.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Several of the values passed to the conversion failure diagnostic are
unsigned and/or 32-bit values, while all format specifiers are for
signed 64-bit integers. Make the specifiers consistent with the
argument.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add timer label for this test suite, so it is included
in sanity check runs with -t timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
enable the test-suite that had been (always) excluded
from running on this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The converted target value for remaining ticks was increased by one to
match original code, which used a one-sided test. The current test is
two-sided, so that increment is already present in the allowed 1 tick
error for boards with no slew, and incorporating it into the absolute
error can cause the test to fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When millisecond/tick conversion is not exact tick delta's are
dependent on the initial tick value. In those cases exact comparisons
need to also allow an adjacent value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When HFCLK has a slew making it faster than LFCLK the busy wait can
expire before the timer fires.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reduce the duration of the timer test so that it will fire before the
busywait elapses even in the worst case of slew between the tick and
busy-wait clocks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test sets a timer using one clock, waits using a second clock,
then sees whether the remaining time is the expected value. When the
two clocks are skewed the comparison requires a threshold. Provide a
means to estimate the maximum expected error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adjusting the input value to allow round to nearest can cause an
overflow which invalidates the expectation that the 32-bit result is
the low 32 bits of the 64-bit result. If the adjustment overflows do
the full-precision conversion and truncate in the caller.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
When the timer frequency is not a multiple of 1000 converting between
ticks and milliseconds introduces error. Avoid propagating the error
by converting divided values rather than dividing converted values.
Also compensate for observed rate differences between the busywait
clock and the timeout clock.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A fast timer clock can advance before or after the remaining time
until an event is captured. Verify the expected relationship between
current and remaining time holds for at least one captured current
time.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When one millisecond is not an integral number of ticks measuring
durations between tick events will sometimes be less than expected to
correct for error that was accumulated between other events. Allow
for that in the duration and period comparisons.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit fixes the assertion in test_timer_remaining() that checks
whether the remaining ticks on a timer is less than or equal to half of
the timer duration after a busy wait of that time. If the timer
duration corresponds to an odd number of ticks, 1 should be added to
the upper bound given k_timer_remaining_ticks() returns
<ticks til next deadline> - <elapsed ticks>,
and <elapsed ticks> is truncated to closest integer tick count.
For example, if
dur_ticks = 3277
<ticks til next deadline> = 3277
<elapsed ticks> = 1638.5 rounded to 1638
rem_ticks would be 1639, which is 1 greater than dur_ticks/2.
Fixes#25331
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
The test of the absolute timeout feature was a simple whitebox test
that inspected the generated ticks field of different constructors for
identity. But it wasn't simple enough, because it was doing a
ticks->ms->ticks conversion (at compile time, sigh) on the input data,
which is obviously lossy on platforms where ticks are shorter than
milliseconds by non-integral factors.
Fix to do the conversion in just one direction.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This test sets a timer, busy waits for half the duration, and then
checks the remaining time is correct. And it correctly does all its
math in tick precision and aligns to a timer interrupt to eliminate
aliasing due to the tick stride.
But it's waiting using k_busy_wait(), not a timer: "half the duration"
in MICROSECONDS (for k_busy_wait()) is not necessarily representable
as an integer number of TICKS on all platforms. Because k_busy_wait()
always rounds up, we need one extra tick of buffer on those platforms.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add support for "absolute" timeouts, which are expressed relative to
system uptime instead of deltas from current time. These allow for
more race-resistant code to be written by allowing application code to
do a single timeout computation, once, and then reuse the timeout
value even if the thread wakes up and needs to suspend again later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
