If canonical zephyr base is already ended by trailing slash, then it
should not be added redundantly.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
In some cases built binary files have different names than "zephyr.hex"
files, and for those cases, information about names of file to keep
should be taken from runners.yaml file.
Moreover if in runners.yaml file exist absolute files paths to binary
files, then they should be changed to relative ones.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
This moves CONFIG_LLVM_USE_LD into cmake/toolchain/llvm as this
is a toolchain kconfig. Also make it a choice to allow the use
of LLVM's lld as linker.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds a Kconfig for MCUboot which is used in the documentation to
the CI Kconfig check allow list.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Uses linux style path output instead of windows style to prevent
issues with cmake assuming the slashes are for escape code
sequences.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Both the requests and pyserial Python packages are used by west commands
(west fetch and west build -b esp* respectively) so move them to the
requirements-base.txt file.
Fixes#56215.
Fixes#56224.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Writing '-S foo' is a convenience shorthand for adding snippets at
CMake time without having to add '-- -DSNIPPET=foo' to the west build
command line. It is worth adding a new one-letter command line option
because snippets are anticipated to be a very commonly used feature.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This key may appear in a module.yml's 'settings' map, and works
analogously to the already existing 'board_root', 'dts_root', etc.
keys: if set, its value is interpreted as a directory that will be
added to SNIPPET ROOT.
For example, if a module.yml contains:
settings:
snippet_root: foo
Then 'foo', relative to the module's base directory, will be added to
SNIPPET_ROOT. This then means that any snippets in foo/snippets will
be discovered by the build system.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new script, snippets.py, which is responsible for searching
SNIPPET_ROOT for snippet definitions, validating them, and informing
the build system about what needs doing as a result.
Use this script in snippets.cmake to:
- validate any discovered snippet.yml files
- error out on undefined snippets
- add a 'snippets' build system target that prints all snippet
names (analogous to 'boards' and 'shields' targets)
- handle any specific build system settings properly,
by include()-ing a file it generates
With this patch, you can define or extend a snippet in a snippet.yml
file anywhere underneath a directory in SNIPPET_ROOT. The snippet.yml
file format has a schema whose initial definition is in a new file,
snippet-schema.yml.
This initial snippet.yml file format supports adding .overlay and
.conf files, like this:
name: foo
append:
DTC_OVERLAY_FILE: foo.overlay
OVERLAY_CONFIG: foo.conf
boards:
myboard:
append:
DTC_OVERLAY_FILE: myboard.overlay
OVERLAY_CONFIG: myboard.conf
/my-regular-expression-over-board-names/:
append:
DTC_OVERLAY_FILE: myregexp.overlay
OVERLAY_CONFIG: myregexp.conf
(Note that since the snippet feature is intended to be extensible, the
same snippet name may appear in multiple files throughout any
directory in SNIPPET_ROOT, with each addition augmenting prior ones.)
This initial syntax aligns with the following snippet design goals:
- extensible: you can add board-specific support for an existing
snippet in another module
- able to combine multiple types of configuration: we can now apply a
.overlay and .conf at the same time
- specializable: this allows you to define settings that only apply
to a selectable set of boards (including with regular expression
support for matching against multiple similar boards that follow
a naming convention)
- DRY: you can use regular expressions to apply the same snippet
settings to multiple boards like this: /(board1|board2|...)/
This patch is not trying to design and implement everything up front.
Additional features can and will be added to the snippet.yml format
over time; using YAML as a format allows us to make
backwards-compatible extensions as needed.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This automates much of the drudgery of enumerating changes to
devicetree bindings at release time. Some customizations and
release-specific tweaks to the script will probably always be needed,
but it's a good starting point.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Currently in binary handler and qemu handler we have status `failed`
in case of test timeout, but in device handler we have status `error`
This not only adds inconsistency between handlers, but also prevents
us from usage test retry functionality for the runs on HW.
Fix timeout status by changing it to `failed` instead of `error`.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
WebP images are smaller for similar resolutions and quality while being
compatible with web browsers and other image processing tools.
For higher resolution images, be sure to limit the display size to make
the rendered pages look reasonable.
This was approved by Benjamin Cabé (@kartben) in this discussion thread:
https://github.com/zephyrproject-rtos/zephyr/pull/55488#issuecomment-1461792751
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
the options --verify and --verify-only where only used when flashing elf
files and were ignored for flashing hex files for example when using
openocd runner.
The command to verify the image is now dependant on the presence of
--verify or --verify-only, and the load command is not executed if
--verify-only is provided.
Signed-off-by: Nicolas VINCENT <nicolas.vincent@vossloh.com>
Add hostlink-awareness to mdb-hw runner. The mdb-nsim and arc-nsim
runners (as well as cmake scripting for nSIM boards) doesn't require
any changes.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
I was using a source file provided by TDK for a sensor driver
and the file was (originally) not encoded as UTF-8. When the read()
function was called, the build would fail but I had no idea why.
This change wrapps the 'read()' call and prints the error with
the file name as context.
Signed-off-by: Yuval Peress <peress@google.com>
The QSPI erase switch is not part of the "firmware" dict, but rather
placed in the overall operation dict.
Fixes#55625.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In many of test specifications yaml files (testcase.yaml, sample.yaml)
section `platform_allow` is added. This change allows to test some
scenarios on platforms, that are not added yet to platform allow
list (or are not going to be added for some reasons).
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Fix how DeviceHandler class does 'serial leftover' cleanup
with loss of test output observed on fast console connections,
e.g. over telnet: either 1 sec. of output might be missed,
or up to 1000 bytes/chars, whatever happens first.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
There is no need to generate all the *_mrsh.c files for
marshalling syscall arguments when userspace is not enabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We are wrongly claiming no console output, yet console output is there
and the failure is just a regular timeout, i.e. the test did not
complete within allocated time.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit extends the Zephyr module yaml scheme with additional
entries for sysbuild in the build section.
This allows for Zephyr modules to extend the sysbuild infrastructure
by providing additional CMake and Kconfig files to be included in
sysbuild.
The new settings are:
build:
sysbuild-cmake: <path>
sysbuild-kconfig: <path>/<file>
sysbuild-ext: <true>|<false>
sysbuild-kconfig-ext: <true>|<false>
those settings follow the same pattern as the equivalent Zephyr build
settings but are processed by sysbuild.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support test levels and the ability to assign a specific test to one
or more levels. Using command line options of twister it is then possible
to select a level and just execute the tests included in this level.
Additionally, a test configuration allows definiing level
dependencies and additional inclusion of tests into a specific level if
the test itself does not have this information already.
In the configuration file you can include complete components using
regular expressions and you can specify which test level to import from
the same file, making management of levels easier.
To help with testing outside of upstream CI infrastructure, additional
options are available in the configuration file, which can be hosted
locally. As of now, those options are available:
- Ability to ignore default platforms as defined in board definitions
(Those are mostly emulation platforms used to run tests in upstream
CI)
- Option to specify your own list of default platforms overriding what
upstream defines.
- Ability to override build_onl_all options used in some testscases.
This will treat tests or sample as any other just build for default
platforms you specify in the configuation file or on the command line.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes#37538 by correctly detecting WSL and blocking bossac from running
on that platform, but allowing it to run on Windows native.
Signed-off-by: João Dullius <joaodullius@bpmrep.com.br>
Pass on the tool-specific options to nrfjprog during all operations, and
not only when programming. This is useful when combined with options
like --ip, that allows west flash to be used over the network.
Fixes#55340.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
