Add fixed-clock clock control driver. This is a first step towards
making fixed-clocks a first-class citizen in the clock control
framework.
Since the change is hidden behind a Kconfig enable this is opt-in
for now.
Signed-off-by: Moritz Fischer <moritzf@google.com>
The word cpu was added to the names of functions, structs, types
and definitions to disambiguate the names and make room in the namespace
for soc clock control functions.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Adapt the clock scheme for testing the clock on the stm32h573i_dk.
By default the HSI is 32MHz (div-by-2).
Only scheme for pll sourced by HSI is useful at max freq of 240MHz.
Configure the usart1-console clock to be csi to always get
a valid clock source in any usecase.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
New nrfx release brings change of Low frequency sources symbols
in nrf_clock hal to uppercase. This commit aligns all occurrences.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add clock_control_get_status checks to the stm32_common_devices adc
and i2c tests, to verify that checking the status of gating clocks and
domain clock sources works.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Split STM32 device clock configuration file so that each driver has its
own tests in its own file
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add a test for testing STM32 I2S domain clock on STM32F401 board.
Add an ifdef on I2C test as F4 does not have a domain clock for I2C.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This makes sure clock selection works even if the registers aren't in their
default (reset) state.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Adds the configurations for testing the clock controller driver
of the stm32H5 serie coreon stm32h573i disco kit
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change the name of the STM32_CLOCK_BUS_APB2 RCC resgister
of the stm32g0 to STM32_CLOCK_BUS_APB1_2
in the testcase for the stm32g0 device.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improve alignment in the source code and limit printed messages
(SYSTEM_CLOCK_NO_WAIT and SYSTEM_CLOCK_WAIT_FOR_* are choice options,
so it is enough to print only the enabled one).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This test needs an initialization step to be done soon after the system
clock is started. ZTEST setup function is too late for that, so use an
initialization function executed at the POST_KERNEL stage instead.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This flag needs to be cleared at the beginning of each test. Otherwise,
when the flag remains set after the previous test, the timer handler is
not rescheduled so executing of the current test is actually pointless.
This was in fact the case with `test_bt_interrupted` before switching
the test suite to the new ZTEST API. When this test was executed as
the second one, the timer handler was called only once and the test
could pass (giving false confirmation that the related routines of
the clock_control_nrf driver work properly). After the API switching,
the order of test execution was changed and that test started failing.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
