Added a driver for the DFRobot A01NYUB distance sensor. This sensor
sends its readings via UART at 9600 baud. This driver uses interrupts
to read the data from the sensor.
Signed-off-by: Oliver King <oliver.king@steadconnect.com>
Add initial version of Infineon CAT1 counter driver
Add initial version of binding file for Infineon
Add counters to psco6 dtsi
Add external trigger pin that runs counter
Signed-off-by: Pavlo Havrylyuk <pavlo.havrylyuk@infineon.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Previously the driver was retrofitted to the kscan api, handling it as a
input device with one row and three columns. With the move to the input
subsystem each input can have its proper input code instead.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Compiling I2C target test for efr32bg22_brd4184a board so
that i2c_gecko.c driver is used in target mode.
Signed-off-by: Kai Meinhard <kaimeinhard@hotmail.de>
Without this, test is run on any target, even if no RTC driver is
supported, leading to unexpected issues.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Added an overlay file for the LPC55S36 to demonstrate
the DMA Support with the scatter_gather test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Added an overlay file for the LPC55S36 to demonstrate
the DMA Support with the loop_transfer test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Added an overlay file for the LPC55S36 to demonstrate
the DMA Support with the chan_blen_transfer test.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Many touchscreen drivers have an option interrupt mode that enables a
different code path. Add an extra test for touchscreen drivers to build
the non-default case.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
AXP192 is a small and simple power management IC featuring different
LDOs, DCDCs, AINs and also GPIOs. It also offers functionaltiy for
battery management.
This change includes the basic regulator driver functionaltiy for
LDO2-3 and DCDC1-3 as well as the mfd driver layer. Further drivers
for GPIO and ADC will follow.
Drivers have been developed and tested on M5StackCore2, an ESP32-based
board. Support for M5StackCore2 is still in progress.
Signed-off-by: Martin Kiepfer <mrmarteng@teleschirm.org>
This PR performs a few cleanup actions for the build-all sensor driver
test:
1. Remove many non-sensors from the test's device tree, including
wireless radios, LED strips, flash memory, and displays. These
devices don't belong in this test and in most cases were not being
compiled anyways due to missing config flags and not being
status-okay.
2. For the remaining devices, enable them in the device tree so the
sensors build and get instantiated. A handful of device nodes that
caused linker errors due to the driver not instantiating are left
disabled.
3. Convert the test I2C and SPI buses into emulated buses to support
upcoming live testing over these sensor devices.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
