Mutex and double-linked list can be statically initialized.
This removes a little bit of boot time overhead.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The files disk_access_usdhc.c, disk_access_spi_sdhc.c,
disk_access_stm32_sdmmc.c, disk_access_ram.c and
disk_access_flash.c are actually drivers for block devices and SD/MMC
controllers. This patch moves this drivers to drivers/disk and
reworks the configuration so that the drivers are selected when
the corresponding node is enabled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SD Card Physical Layer specification states in Table 7-1
(in section 7.3.1.1) that the LSB of the 48 bit command must
be set to 1 to act as an 'end bit'.
Fixes#33479
Signed-off-by: Rich Barlow <rich@bennellick.com>
This commit prepares supporting sdmmc on
stm32l4+ devices. When trying to compile the
sdmmc driver there is a compilation error
because `HAL_SDEx_DriveTransceiver_1_8V_Callback`
is not implemented. We solve this by compiling
also `sd_ex` in cube as this function is implemented
there as weak.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make sector size used by flash disk configurable and expose new disk and
fatfs configurations to Kconfig.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For USB mass storage class, a fixed size 16 KiB FAT12 ramdisk
is forced. This is not really visible to the user and
the DISK_RAM_VOLUME_SIZE option is ignored.
There is no use of such a small file system and for USB MSC
testing, like throughput or USB3CV, a file system is not necessary.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The power and chip detect gpios are optional device tree properties for
the nxp usdhc driver. Fixes a build error on the mm_swiftio board, which
does not set the power gpio property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
The sdhc_spi_write_multi function is sending the CMD25
for multiple block write operation on the SD card
instead of looping the CMD24. This is improving
the transfer speed compared to the sdhc_spi_write function
when the nb of blocks to write is significant (more than 2).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Leave the SPI CS GPIO handling to the SPI controller driver and make SPI
CS GPIO optional for SDHC disk access via SPI.
The SPI SDHC implementation relies on SPI_HOLD_ON_CS so we need to
explicitly release the SPI controller driver after ending transmissions
to force the CS line to be de-asserted.
Fixes#27444.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Removes unused instances of struct usdhc_priv in the nxp usdhc driver.
The DISK_ACCESS_USDHC_INIT macro is responsible for instantiating these
variables.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
