Added a driver for the DFRobot A01NYUB distance sensor. This sensor
sends its readings via UART at 9600 baud. This driver uses interrupts
to read the data from the sensor.
Signed-off-by: Oliver King <oliver.king@steadconnect.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
- use CONFIG_HAS_HW_NRF_* symbols consistently in nRF multi-instance
drivers when creating particular driver instances
- remove unnecessary hidden Kconfig options that indicated the type of
peripheral to be used by a given instance (e.g. SPI, SPIM, or SPIS)
and enabled proper nrfx driver instance; instead, use one option per
peripheral type and include the corresponding shim driver flavor into
compilation basing on that option (not the one that enables the nrfx
driver as it was incorrectly done so far in some cases)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This fix a build issue where ICM42688_DECODER is enabled but
SENSOR_ASYNC_API is not, which results in some structures in an
orphan section:
warning: orphan section
`._sensor_decoder_api.static.invensense_icm42688__decoder_api_' from
`libdrivers__sensor__icm42688.a(icm42688_decoder.c.obj)'
being placed in section
`._sensor_decoder_api.static.invensense_icm42688__decoder_api_'
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use a combination of sys_cpu_to_be16 and i2c_burst_write_dt for setting
16 bits registers. Get rid of a bunch of temporary variables, custom
conversions and few bus writes.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The current ID for BQ274XX_DEVICE_ID is actually the one for the
BQ27421. The driver seems to work with the BQ27427 as well, at least the
common and extended commands are the same, so add that variant as well,
rename the existing one and print the currently read ID when the ID
check fails.
The configuration registers have a different offset though, so add a
register offset table and make the device rcognize the right one un
runtime based on the device ID.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Use i2c_reg_write_byte_dt instead of bq274xx_cmd_reg_write. The wrapper
does not add anything anyway.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Change bq274xx_sample_fetch to support SENSOR_CHAN_ALL. This makes it
possible to get the sensor data using the sensor shell, besides being
generally convenient.
Also drop a redundant comment.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The device technical reference manual says "The Sealed to Unsealed key
has two identical words". Use two different defines with the same value
in the code so it's somewhat less ambiguous that the double write is
intentional.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add a retry count limit to config update mode loops, this way the system
can still boot if there's an issue with the device. The normal sleep
should be enough for correct operation, adding a conservative limit.
Rework the delays to be unambiguous while at it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fix the calculation for designenergy_mwh, as right now it's using a
float casted straight to an int, which results in the factor rounded
from 3.7 to 3. Also rework both that and taperrate so that they don't
use floating point.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Control reg write seems to support two bytes mode (the technical
reference shows example of that), so use a single i2c_write_dt there.
Also drop a couple alias variables from bq274xx_cmd_reg_write.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add the bq274xx_ back to the static function prefixes for the bq274xx
driver.
These have been removed recently but every other sensor and most Zephyr
driver have static function prefixed, this helps avoiding ambiguity in
list files, stack traces, setting debugging breakpoints etc.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
channel_pos_read bit was being cleared with a sensor channel enum value
instead of the encoded bit position.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
Forcing the usage of the RC oscillator and keeping it on turns out
to have detrimental effects to the readings by default. The default
clock mode settings are perfectly fine.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
When CONFIG_PM_DEVICE is enabled, the FDC2x1x driver includes code that
doesn't access the name of the shutdown pin's GPIO port correctly.
Correct this so the code derefences the right struct members.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
The FDC2X1X driver depends on newlib in Kconfig. This prevents the
driver from being built in a native_posix testing environment, which uses
an external libc from the host. Allow the driver to be built with an
external libc as well.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
