Add support for flash NOR memory devices on a NXP S32 QSPI bus. The
driver uses a fixed LUT configuration assuming a default standard page
size and erase types, and allows to select between multiple read/program
instructions/modes. It is also possible to read the flash device
characteristics from the device at run-time as long as the memory is
JESD216 compatible, providing more flexibility.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add Nuvoton numaker series flash memory controller(FMC) with erase,
read & write features of soc-flash. Also update Nuvoton manifest
to include zephyrproject-rtos/hal_nuvoton#6.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
This CL attempts to implement npcx's flash driver instead of the
original one (npcx spi driver plus spi_nor flash driver).
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Flash API states that drivers should support write requests without
any restrictions on location or alignment of the source buffer.
Due to hardware limitations of the QSPI peripheral, the nrf_qspi_nor
driver currently fails to perform a write from a RAM buffer that is
not word-aligned. Fix this by using in such case the same mechanism
that is used when the source buffer is located in the internal flash
(copy data to a buffer located on stack).
Also correct the length parameter for writes from this stack-based
buffer to be the actual data chunk length, not always the size of
the buffer (as for CONFIG_NORDIC_QSPI_NOR_STACK_WRITE_BUFFER_SIZE > 4
this may lead to overwriting of some data located next in the flash).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Refactor the part of the flash simulator that interacts with the
host when build for native platforms, so it is possible to use
it also with the embedded libCs.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Support device power management in spi_nor driver. Only use
SUSPEND/RESUME if `CONFIG_SPI_NOR_IDLE_IN_DPD` is not enabled to avoid
state conflicts.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This commit adds the jedec216 read sfdp and Read ID
function API. The qspi commands are issued to the
quad flash device.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Avoid timeout when taking semaphores in ISR.
This enables flash operations inside interrupted context
such as exceptions, allowing operations like saving core
dump to flash for instance.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Allows to configure OSPI Manager IO ports with devicetree.
If properties are absent, then original default values
are preserved for compatibility.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Copy the LUT to SRAM before updating it. This avoids the application
reading LUT entries from FlexSPI while trying to write them to FlexSPI
configuration registers, which could result in invalid LUT entries being
added.
This update is applied to all in tree flash FlexSPI drivers, although
the failure has only been observed with the flash_mcux_flexspi_nor
driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This make MCUboot build as Zephyr application.
Providing optinal 2nd stage bootloader to the
IDF bootloader, which is used by default.
This provides more flexibility when building
and loading multiple images and aims to
brings better DX to users by using the sysbuild.
MCUboot and applications has now separate
linker scripts.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Like other stm32 drivers, especially the stm32 flash ospi,
the DMA callback accepts a null or positive status.
It returns an error in case of negative.
BTW it also sets variable as unused, like stm32 flash ospi does.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Replace memcpy usage in write since it is not linked to non-external
flash which might cause read-while-write issues.
Move the function that invalidated the data cache inside the critical
section to avoid context switch before it is invalidated.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Check memc_flexspi_is_running_xip before calling
memc_flexspi_set_device_config in hyperflash init.
This aligns with the nor flash driver.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
