Chronyd and similar time services, when using PTP devices, may need
the BindsTo/After directives to ensure the devices are available
before starting. Tag PTP devices with systemd to allow for wider
adoption.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
But the directories are changed from /dev/loop/by-ref/ -> /dev/disk/by-loop-ref/
and /dev/loop/by-inode/ -> /dev/disk/by-loop-inode/.
As /dev/loop/ is used by losetup command for other purpose.
See issue #28475.
This effectively reverts commits 9915cc6086,
5022fab15f, and
c0d998248e.
Decrease devlink priority for encrypted partitions, and make the priority for
decrypted DM devices relatively higher. This is for the case that an encrypted
partition and its decrypted DM device have the same label.
Before c43ff248f9, the following line in
60-drm.rules also sets ID_PATH for all pci, usb, and platform devices:
===
ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id"
===
Unfortunately, some existing rules rely on the unexpected behavior.
To keep the backward compatibility, let's set ID_PATH for them.
Fixes#28411.
Previously, if the priority is same, devlinks are always replaced by
newer events. The commit 331aa7aa15 changes
that to keep the existing devlink. That should not change any behavior
when the devices that request the same symlink do not have any
dependency, e.g. when /dev/sda1 and /dev/adb1 request the same
/dev/disk/by-label symlink, as there are no guarantee that which device
is processed first.
However, when devices has dependency, e.g. /dev/sda and /dev/sda1
request the same /dev/disk/by-label symlink, previously the symlink
always pointed to the partition, as the partition is always processed
later. But, 331aa7aa15 makes the symlink
point to the whole disk.
The change by 331aa7aa15 is crucial to
improve performance of devlink handling, especially when a system has
large number of disks with same label or so. Hence, cannot and should
not be reverted.
So, let's workaround the case, as such situation should happen only when
the disk is a hybrind ISO image, I guess.
Fixes#28468.
The DMI rules where so far guarded by an ACTION=="add" rule, but that
doesn't really make sense for setting properties (only for setting
access modes/ownership of nodes).
Hence let's move this into its own file, that guards properly on
ACTION!="remove".
Before this change the hardware vendor/model info would be dropped
whenever the device was retriggered.
Linux kernel will, as documented in drivers/video/backlight/backlight.c,
report changes to a backlights brightness as a uevent (ACTION=change).
systemd-udev will consume the uevent, match on this rule and try to
activate the systemd-backlight service for the backlight. BUT when
systemd is not compiled with backlight support, this will lead to
failure that is reported in the journal.
Since the failure to activate systemd-backlight and subsequent failure
log entry happens on every backlight brightness change, we found the
resulting logspam during regular operation excessive and came up with
this patch to mitigate it.
The conditional is also extended to "*kbd_backlight" match, since
even though we did not investigate to see if the logspam would be
similar, the unconditional match to activate systemd-backlight here
would also not make sense when the feature is not compiled in.
Signed-off-by: Simon Braunschmidt <simon.braunschmidt@iba-group.com>
Accel (Compute Acceleration) are new devices for AI/ML computation:
https://docs.kernel.org/accel/introduction.html
They are part of DRM subsystem. Add them to 'render' group since
no other appropriate group in standard linux systems exist. This
can be changed when proper common user-space components will emerge,
and new group for acceleration devices access will be established.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
xHCI host controller may register two (or more?) USB root hubs for USB
2.0 and USB 3.0, and devices under the hubs may have same ID_PATH.
So, to avoid the conflict, let's introduce ID_PATH_WITH_USB_REVISION
that includes the USB revision.
Closes#19406.
We started systemd-vconsole-setup in two ways: via a dbus call from localed to
do systemd-vconsole-setup.service/restart, and from udev, calling the binary
directly. This patch makes udev call
systemctl restart systemd-vconsole-setup.service
effectively implementing the same method as localed.
Ordering is implemented at the unit level, so we can use --no-block to not
block here.
Meta's resource control demo project[0] includes a benchmark tool that can
be used to calculate the best iocost solutions for a given SSD.
[0]: https://github.com/facebookexperimental/resctl-demo
A project[1] has now been started to create a publicly available database
of results that can be used to apply them automatically.
[1]: https://github.com/iocost-benchmark/iocost-benchmarks
This change adds a new tool that gets triggered by a udev rule for any
block device and queries the hwdb for known solutions. The format for
the hwdb file that is currently generated by the github action looks like
this:
# This file was auto-generated on Tue, 23 Aug 2022 13:03:57 +0000.
# From the following commit:
# ca82acfe93
#
# Match key format:
# block:<devpath>:name:<model name>:
# 12 points, MOF=[1.346,1.346], aMOF=[1.249,1.249]
block:*:name:HFS256GD9TNG-62A0A:fwver:*:
IOCOST_SOLUTIONS=isolation isolated-bandwidth bandwidth naive
IOCOST_MODEL_ISOLATION=rbps=1091439492 rseqiops=52286 rrandiops=63784 wbps=192329466 wseqiops=12309 wrandiops=16119
IOCOST_QOS_ISOLATION=rpct=0.00 rlat=8807 wpct=0.00 wlat=59023 min=100.00 max=100.00
IOCOST_MODEL_ISOLATED_BANDWIDTH=rbps=1091439492 rseqiops=52286 rrandiops=63784 wbps=192329466 wseqiops=12309 wrandiops=16119
IOCOST_QOS_ISOLATED_BANDWIDTH=rpct=0.00 rlat=8807 wpct=0.00 wlat=59023 min=100.00 max=100.00
IOCOST_MODEL_BANDWIDTH=rbps=1091439492 rseqiops=52286 rrandiops=63784 wbps=192329466 wseqiops=12309 wrandiops=16119
IOCOST_QOS_BANDWIDTH=rpct=0.00 rlat=8807 wpct=0.00 wlat=59023 min=100.00 max=100.00
IOCOST_MODEL_NAIVE=rbps=1091439492 rseqiops=52286 rrandiops=63784 wbps=192329466 wseqiops=12309 wrandiops=16119
IOCOST_QOS_NAIVE=rpct=99.00 rlat=8807 wpct=99.00 wlat=59023 min=75.00 max=100.00
The IOCOST_SOLUTIONS key lists the solutions available for that device
in the preferred order for higher isolation, which is a reasonable
default for most client systems. This can be overriden to choose better
defaults for custom use cases, like the various data center workloads.
The tool can also be used to query the known solutions for a specific
device or to apply a non-default solution (say, isolation or bandwidth).
Co-authored-by: Santosh Mahto <santosh.mahto@collabora.com>
