Not all bluetooth devices come through the bluetooth subsystem and those that
don't currently lack the ID_BUS=bluetooth env. This again fails to apply udev
rules and/or hwdb entries that rely on the bluetooth bustype to be set.
Fix this by checking the attribute id/bustype on the device instead of just
the subsystem.
Fixes#4566
The existing accelerometer rules only support IIO devices, however
iio-sensor-proxy can also work with accelerometers made available
through the input (evdev) subsystem.
In this case I am working with an accelerometer input device backed by an
ACPI driver for which the hierarchy is:
- ACCE0001 (ACPI device)
-> input8
-> event7
We want the mount matrix (from hwdb) to be applied to both input8 and
event7. However, to match in 60-sensor.hwdb, we need to be working
with the modalias of the parent device (ACCE0001), and it is tricky
to access that when processing the input8 device which has it's own
modalias.
Instead of working directly with modalias, this ACPI-specific rule
uses the "hid" attribute to reconstruct the ACPI modalias. Since input
and event devices do not provide a hid attribute we will always get this
from the ACPI parent.
The modalias is constructed according to the definition in the kernel's
Documentation/acpi/namespace.txt and create_pnp_modalias(). We will only
use the first _CID/_HID value available, i.e. in some cases we will only
reconstruct the first part of the modalias, but that should be enough
granularity for our needs.
The builtin path id for virtio block devices has been changed
to use the bus id without a prefix "virtio-pci" to be
compatible with all virtio transport types.
In order to not break existing setups, the by-path symlinks for
virtio block devices on the PCI bus are reintroduced by udev rules.
The virtio-pci symlinks are considered to be deprecated and
should be replaced by the native PCI symlinks.
Example output for a virtio disk in PCI slot 7:
$ ls /dev/disk/by-path
pci-0000:00:07.0
pci-0000:00:07.0-part1
virtio-pci-0000:00:07.0
virtio-pci-0000:00:07.0-part1
See also
[1] https://lists.freedesktop.org/archives/systemd-devel/2017-February/038326.html
[2] https://lists.freedesktop.org/archives/systemd-devel/2017-March/038397.html
This reverts f073b1b but keeps the same symlinks for compatibility.
Its necessary to specify the KVM PTP device name in userspace.
In case a network card with PTP device is assigned to the guest,
it might be the case that KVM PTP gets /dev/ptp0 instead of /dev/ptp1.
Fix a device name for the KVM PTP device.
Sometimes a system may have 2 input event nodes with the same name where
we only want to apply keyboard hwdb rules to 1 of the 2 devices.
This problem happens e.g. on devices where the soc_button_array driver is
used (e.g. intel atom based tablets) which registers 2 event nodes with
the name "gpio-keys".
This commit adds a new extended match rule which extends the match to also
check $attr{phys} and $attr{capabilities/ev}, allowing to differentiate
between devices with an identical name.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since commit 9d06297, mount units from mountinfo are not bound to their devices
anymore (they use the "Requires" dependency instead).
This has the following drawback: if a media is mounted and the eject button is
pressed then the media is unconditionally ejected leaving some inconsistent
states.
Since udev is the component that is reacting (no matter if the device is used
or not) to the eject button, users expect that udev at least try to unmount the
media properly.
This patch introduces a new property "SYSTEMD_MOUNT_DEVICE_BOUND". When set on
a block device, all units that requires this device will see their "Requires"
dependency upgraded to a "BindTo" one. This is currently only used by cdrom
devices.
This patch also gives the possibility to the user to restore the previous
behavior that is bind a mount unit to a device. This is achieved by passing the
"x-systemd.device-bound" option to mount(8). Please note that currently this is
not working because libmount treats the x-* options has comments therefore
they're not available in utab for later application retrievals.
We have a system which has the HDMI audio capability internally,
but pulseaudio is not giving it a very high priority compared
to e.g. USB sound cards.
The sound device appears on the platform bus and it is not
currently tagged with any form factor information.
It seems safe to assume that any sound card that is directly on the
platform bus is of internal form factor, but we must be careful because
udev rules will match all parent devices, not just the immediate parent,
and you will frequently encounter setups such as:
Platform bus -> USB host controller -> USB sound card
In that case, SUBSYSTEMS==platform would match even though we're
clearly working with an external USB sound card.
In order to detect true platform devices here, we rely on the observation
that if any parent devices of the sound card are PCI, USB or firewire
devices, then this sound card cannot directly connected to the platform
bus. Otherwise, if we find a parent device on the platform bus, we assume
this is an internal sound card connected directly to the platform bus.
This commit adds a rules file to extract the properties from hwdb
to set on i2c IIO devices. This is used to set the ACCEL_MOUNT_MATRIX
property on IIO devices, to be consumed by iio-sensor-proxy or
equivalent daemon.
The hwdb file contains documentation on how to write quirks. Note
however that mount information is usually exported in:
- the device-tree for ARM devices
- the ACPI DSDT for Intel-compatible devices
but currently not extracted by the kernel.
Also note that some devices have the framebuffer rotation that changes
between the bootloader and the main system, which might mean that the
accelerometer is then wrongly oriented. This is a missing feature in the
i915 kernel driver: https://bugs.freedesktop.org/show_bug.cgi?id=94894
which needs to be fixed, and won't require quirks.
The rfkill service waits for rfkill device initialization as reported by
udev_device_is_initialized(), and if that is never reported it might dead-lock.
However, udev never reports completed initialization for devices that have no
properties or tags set. For some rfkill devices this might be the case, in
particular those which are connected to exotic busses, where path_id returns
nothing.
This patch simply sets the SYSTEM_RFKILL property on all rfkill devices, to
ensure that udev_device_is_initialized() always reports something useful and we
don't dead-lock.
Fixes: #2745
Sometimes, the persistent storage rules should be skipped for a subset
of devices. For example, the Qubes operating system prevents dom0 from
parsing untrusted block device content (such as filesystem metadata) by
shipping a custom 60-persistent-storage.rules, patched to bail out early
if the device name matches a hardcoded pattern.
As a less brittle and more flexible alternative, this commit adds a line
to the two relevant .rules files which makes them test the value of the
UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG device property, modeled
after the various DM_UDEV_DISABLE_*_RULES_FLAG properties.
Persistent memory devices can be exposed as block devices as /dev/pmemN
and /dev/pmemNs. pmemN is the raw device and is byte-addressable from
within the kernel and when mmapped by applications from a DAX-mounted
file system. pmemNs has the block translation table (BTT) layered on top,
offering atomic sector/block access. Both pmemN and pmemNs are expected
to contain file systems.
blkid(8) and lsblk(8) seem to correctly report on pmemN and pmemNs.
systemd v219 will populate /dev/disk/by-uuid/ when, for example, mkfs is
used on pmem, but systemd v228 does not.
Add pmem to the whitelist.
Add a new key ID_INPUT_TOUCHPAD_INTEGRATION=internal|external so we have a
single source for figuring out which touchpads are built-in.
Fairly simple approach: bluetooth is external, usb is external unless it's an
Apple touchpad. Everything else is internal.
Something has to so we can have udev rules rely on this. Right now the ID_BUS
setting is inconsistent: usb is set, ata and pci are set, bluetooth is not
set, rmi is too new to be featured.
70-mouse even relied on bluetooth even though it was never set
Since the introduction of the whitelist in 60-persistent-storage.rules
block device symlinks are no longer created for scm block devices.
Add scm to the whitelist.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
blkid reports PARTUUID values also for partitions that are defined by a
dos partitioning scheme. Instead of limiting the partitioning scheme to
"gpt or dos" just drop the test for the partitioning scheme and trust
blkid to do the right thing.
