In order to sync up with EDK201911 stable release, it is required
to add missing header files in the INF file. Otherwise, the build
will throw warnings. This patch added the missing headers in INF
files.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Soemtimes when JTAG based debug is not available, it might be easier
to have Shell access in earlier stage to check lots of platform
settings. Today it is impossible because full Shell has lots of other
dependencies which might not satisfy in early stage. This patch added
a PCD PcdMiniShellEnabled to build a mini Shell with very few
dependencies. This mini Shell can be used in early debug phase for SBL.
To use it, add the following to override the PCD for a specific stage
in BootloaderCorePkg.dsc.
EX:
$(PLATFORM_PACKAGE)/Stage1B/Stage1B.inf {
<PcdsFeatureFlag>
gPlatformCommonLibTokenSpaceGuid.PcdMiniShellEnabled | TRUE
...
}
Then include ShellLib.h in stage C code and add ShellLib in related
stage INF file. If adding it into Stage1A, it needs to be after the
Stage1A banner print out.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch removed global variable usages in ShellLib. It is
required when running Shell in early stage from flash. In this
case global variable is read-only. All memory should be allocated
from stack or heap.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
If dumping address not aligned at 16 boundary, the current Shell
will print the aligned address in the dump. It makes sense for
a memory block display, but it is a little bit confusing for single
memory address display. This patch fixed this issue by printing the
exact address when the display count is 1.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This will fully support PatchCheck.py.
- Remove all trailing whitespace
- Convert LF to CRLF by default
- Update EFI_D_* to DEBUG_*
- Re-enable CRLF check in PatchCheck.py
Signed-off-by: Aiden Park <aiden.park@intel.com>
This provides basic insertion sort API for Linked List. As part of change,
this insertion sort is used for PCI BAR calculation by its alignment
and for shell commands list by its name.
Signed-off-by: Aiden Park <aiden.park@intel.com>
OsBootOption config data provides addendum field to support multiple boot
option config data into a single boot option.
This patch updates a single boot option properly with multiple addendums.
Signed-off-by: Aiden Park <aiden.park@intel.com>
This allows 'fs ls' command to print directory or file lists to both serial
and display console according to CONSOLE_OUT_DEVICE_MASK.
Signed-off-by: Aiden Park <aiden.park@intel.com>
This 'fs' shell command can be used for basic file system check.
Usage: fs init [device no.] [hwpart no.] [swpart no.]
fs close
fs info
fs ls [dir or file path]
- 'device no.' is from Platform Device Table.
- all 0s by default if 'fs init' has no parameters
- root dir by default if 'fs ls' has no dir or file path
Signed-off-by: Aiden Park <aiden.park@intel.com>
"MM" SBL Shell command can be used to dump PCI configuration space
registers. On the other side, "PCI" command can be used to list all
PCI devices. This patch enhanced "PCI" command to support PCI
configuration space dump by redirecting it to "MM" command internally.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The 'mm' (formely 'mem') command is being
updated to handle PCI device formatted
addresses and also to support IO device
interfacing. Removing the 'io' command too
since it has been intergrated into the 'mm'
command.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The 'boot' command is making use of a global
variable declared in the OS Loader but it might
not always be available if the Shell lib is
used with other code. This patch removes the
dependency on the global variable.
Also fixes a small issue with not providing a
value at the prompt; instead prompt the user
with a error message when no valid value has
been provided.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
This patch added command line history upport in SBL Shell. It makes
it easy to run a previous command using Up/Down arrow key.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
The 'boot' command is resetting the current
boot option to be option zero any time the
command is invoked which conflicts with the
'c' command which allows a user to select the
next boot option that should be tried. Remove
the resetting to resolve the issue when doing
'c' sub-command in the 'boot' command.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The 'boot' command has been updated to add
an option to update the current boot option
to be booted next, e.g. mCurrentBoot. To
change the current boot option just need to
run 'boot' and then select 'c' and the
index to change the current boot option to.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
The OS Loader 'boot' shell command does
not allow a user to skip data entry for
a given input field which can be tedious.
To make it easier allow users to press
enter to re-use the current value for
the boot option being modified to skip
to the options that they actually want
to update.
Also remove the '-a' option, no one will
typically re-enter all of the boot options.
Signed-off-by: James Gutbub <james.gutbub@intel.com>
Since OsLoader will restart from beginning and all memory will be
reclaimed, it is required for Shell library to re-initialize the
global varaibles, for example, command list. Otherwise, the old
memory pointer will be used and cause issues. This patch added the
link list re-initialization in Shell lib. It fixed#253.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Currently, all shell commands are statically defined in header file.
Add shell command registration API to allow include/exclude shell
commands dynamically.
Later, some debug shell commands will be added according to build
mode or debug mask.
- TBD: Sorting shell commands by name
Signed-off-by: Aiden Park <aiden.park@intel.com>
Guo Dong
Maurice Ma
Aiden Park
Kok Tong Ong
James Gutbub