Convert the line endings stored for all text files in the repository to
LF. The majority previously used DOS-style CRLF line endings. Add a
.gitattributes file to enforce this and treat certain extensions as
never being text files.
Update PatchCheck.py to insist on LF line endings rather than CRLF.
However, its other checks fail on this commit due to lots of
pre-existing complaints that it only notices because the line endings
have changed.
Silicon/QemuSocPkg/FspBin/Patches/0001-Build-QEMU-FSP-2.0-binaries.patch
needs to be treated as binary since it contains a mixture of line
endings.
This change has implications depending on the client platform you are
using the repository from:
* Windows
The usual configuration for Git on Windows means that text files will
be checked out to the work tree with DOS-style CRLF line endings. If
that's not the case then you can configure Git to do so for the entire
machine with:
git config --global core.autocrlf true
or for just the repository with:
git config core.autocrlf true
Line endings will be normalised to LF when they are committed to the
repository. If you commit a text file with only LF line endings then it
will be converted to CRLF line endings in your work tree.
* Linux, MacOS and other Unices
The usual configuration for Git on such platforms is to check files out
of the repository with LF line endings. This is probably the right thing
for you. In the unlikely even that you are using Git on Unix but editing
or compiling on Windows for some reason then you may need to tweak your
configuration to force the use of CRLF line endings as described above.
* General
For more information see
https://docs.github.com/en/get-started/getting-started-with-git/configuring-git-to-handle-line-endings .
Fixes: https://github.com/slimbootloader/slimbootloader/issues/1400
Signed-off-by: Mike Crowe <mac@mcrowe.com>
When the bus master decoding was disabled by default in PCI bus, the
device driver should try to enable it on its own. However, eMMC
driver does not have the enabling code. It caused the eMMC access
failure.
It fixed#1153.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch fixed OsLoader boot from SD card issue on Intel APL CRB
borads. The SD/eMMC library was updated to follow the proper sequence
for SD card. Also platform code was updated to detect SD card and
apply SD card power using proper GPIO pins.
It fixed#729.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added IoMmu interfaces support for MMC library. This will
allow the eMMC library to use DMA buffer for I/O transactions.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
In order to sync up with EDK201911 stable release, it is required
to add missing header files in the INF file. Otherwise, the build
will throw warnings. This patch added the missing headers in INF
files.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This will fully support PatchCheck.py.
- Remove all trailing whitespace
- Convert LF to CRLF by default
- Update EFI_D_* to DEBUG_*
- Re-enable CRLF check in PatchCheck.py
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch allows platform to degrade eMMC HS400 to HS200 using
static configuration. To do this, please add the following into
BoardConfig.py:
self.ENABLE_EMMC_HS400 = 0
This is useful when platform has hardware issue to run at eMMC
HS400 mode.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
This patch added basic deinit support in the media DevInit() interface.
It uses a special DevDeinit phase to inform the media driver to do
device de-initialization. This de-initialization flow will be called
before OsLoader restarting and OS booting.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
- CMD23(SET_BLOCK_COUNT) is for only MMC.
- CMD17(READ_SINGLE_BLOCK) must be used when reading a single block
with SD card
Signed-off-by: Aiden Park <aiden.park@intel.com>
This patch enabled DISABLE_NEW_DEPRECATED_INTERFACES build option by
default so that the deprecated APIs cannot be used in SBL source tree.
It is to enhance the coding for security.
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
