Use the "abspath" call when symlinking the gdb python scripts in
scripts/gdb/linux. This call is needed to avoid broken links when
running the scripts_gdb target on a build directory located directly
under the source tree (e.g., O=builddir).
Fixes: 659bbf7e1b ("kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)")
Signed-off-by: Joel Granados <j.granados@samsung.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Use $(obj)/ instead of $(src)/ prefix when building C++ modules for
host, as explained in commit b1992c3772 ("kbuild: use $(src) instead
of $(srctree)/$(src) for source directory"). This fixes build failures
of 'xconfig':
$ make O=build/ xconfig
make[1]: Entering directory '/data/linux/kbuild-review/build'
GEN Makefile
make[3]: *** No rule to make target '../scripts/kconfig/qconf-moc.cc', needed by 'scripts/kconfig/qconf-moc.o'. Stop.
Fixes: b1992c3772 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Reported-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_MODULES is disabled, 'make (bin)rpm-pkg' fails:
$ make allnoconfig binrpm-pkg
[ snip ]
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/kernel
error: File not found: .../linux/rpmbuild/BUILDROOT/kernel-6.10.0_rc3-1.i386/lib/modules/6.10.0-rc3/modules.order
To make it work irrespective of CONFIG_MODULES, this commit specifies
the directory path, /lib/modules/%{KERNELRELEASE}, instead of individual
files.
However, doing so would cause new warnings:
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.alias.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.builtin.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.dep.bin
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.devname
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.softdep
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols
warning: File listed twice: /lib/modules/6.10.0-rc3-dirty/modules.symbols.bin
These files exist in /lib/modules/%{KERNELRELEASE} and are also explicitly
marked as %ghost.
Suppress depmod because depmod-generated files are not packaged.
Fixes: 615b3a3d2d ("kbuild: rpm-pkg: do not include depmod-generated files")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
The make deb-pkg target calls debian-orig which attempts to either
hard link the source .tar to the build-output location or copy the
source .tar to the build-output location. The test to determine
whether to ln or cp is incorrectly expanded by Make and consequently
always attempts to ln the source .tar. This fix corrects the escaping
of '$' so that the test is expanded by the shell rather than by Make
and appropriately selects between ln and cp.
Fixes: b44aa8c96e ("kbuild: deb-pkg: make .orig tarball a hard link if possible")
Signed-off-by: Thayne Harbaugh <thayne@mastodonlabs.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
Building with W=1 incorrectly emits the following warning:
WARNING: modpost: missing MODULE_DESCRIPTION() in vmlinux.o
This check should apply only to modules.
Fixes: 1fffe7a34c ("script: modpost: emit a warning when the description is missing")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
In commit b18b047002 ("kbuild: change scripts/mksysmap into sed
script"), the mksysmap script was transformed into a sed script,
made directly executable with "#!/bin/sed -f". Apparently, the path to
sed is different on NixOS.
The shebang can't use the env command, otherwise the "sed -f" command
would be treated as a single argument. This can be solved with the -S
flag, but that is a GNU extension. Explicitly use sed instead of relying
on the executable shebang to fix NixOS builds without breaking build
environments using Busybox.
Fixes: b18b047002 ("kbuild: change scripts/mksysmap into sed script")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
expr_trans_bool() performs an incorrect transformation.
[Test Code]
config MODULES
def_bool y
modules
config A
def_bool y
select C if B != n
config B
def_tristate m
config C
tristate
[Result]
CONFIG_MODULES=y
CONFIG_A=y
CONFIG_B=m
CONFIG_C=m
This output is incorrect because CONFIG_C=y is expected.
Documentation/kbuild/kconfig-language.rst clearly explains the function
of the '!=' operator:
If the values of both symbols are equal, it returns 'n',
otherwise 'y'.
Therefore, the statement:
select C if B != n
should be equivalent to:
select C if y
Or, more simply:
select C
Hence, the symbol C should be selected by the value of A, which is 'y'.
However, expr_trans_bool() wrongly transforms it to:
select C if B
Therefore, the symbol C is selected by (A && B), which is 'm'.
The comment block of expr_trans_bool() correctly explains its intention:
* bool FOO!=n => FOO
^^^^
If FOO is bool, FOO!=n can be simplified into FOO. This is correct.
However, the actual code performs this transformation when FOO is
tristate:
if (e->left.sym->type == S_TRISTATE) {
^^^^^^^^^^
While it can be fixed to S_BOOLEAN, there is no point in doing so
because expr_tranform() already transforms FOO!=n to FOO when FOO is
bool. (see the "case E_UNEQUAL" part)
expr_trans_bool() is wrong and unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Currently, the initial state of the "Save" button is always active.
If none of the CONFIG options are changed while loading the .config
file, the "Save" button should be greyed out.
This can be fixed by calling conf_read() after widget initialization.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a leftover from commit ce1fc9345a ("kconfig: do not clear
SYMBOL_DEF_USER when the value is out of range").
This code is now redundant because if a user-supplied value is out
of range, the value adjusted by sym_validate_range() differs, and
conf_unsaved has already been incremented a few lines above.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'dt_binding_check' target shouldn't depend on the kernel
configuration, but it has since commit 604a57ba97 ("dt-bindings:
kbuild: Add separate target/dependency for processed-schema.json").
That is because CHECK_DT_BINDING make variable was dropped, but
scripts/dtc/Makefile was missed. The CHECK_DTBS variable can be used
instead.
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In convention, short logs print the output file, not the input file.
Let's change the suffix for 'AS' since it assembles *.S into *.o.
[Before]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The previous commit removed the subshell execution from scripts/mksysmap,
which is now simple enough to become a sed script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 951bcae6c5 ("kallsyms: Avoid weak references for kallsyms
symbols"), the kallsyms step 3 always occurs.
You can compare the build logs.
[Before 951bcae6c5]
$ git checkout 951bcae6c5a0^
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After 951bcae6c5]
$ git checkout 951bcae6c5
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD .tmp_vmlinux.kallsyms3 # should not happen
NM .tmp_vmlinux.kallsyms3.syms # should not happen
KSYMS .tmp_vmlinux.kallsyms3.S # should not happen
AS .tmp_vmlinux.kallsyms3.S # should not happen
LD vmlinux
The resulting vmlinux is correct, but it always requires an additional
linking step.
The symbols produced by kallsyms are excluded from kallsyms itself
because they were previously missing in step 1. With those symbols
excluded, the symbol lists matched between step 1 and step 2,
eliminating the need for step 3. Now, this has a negative effect.
Since 951bcae6c5, the PROVIDE() directives provide the fallback
definitions, which are not trimmed from the sysbol list in step 1
because ${kallsymso_prev} is empty at this point.
In step 2, ${kallsymso_prev} is set, and the kallsyms_* symbols are
trimmed from the symbol list.
Due to the table size difference between step 1 and step 2 (the former
is larger due to the presence of kallsyms_*), step 3 is triggered.
Now that the kallsyms_* symbols are always linked, let's stop omitting
them from kallsyms. This avoids unnecessary step 3.
Fixes: 951bcae6c5 ("kallsyms: Avoid weak references for kallsyms symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Recently we went through the source tree and replaced
$(srctree)/$(src) w/ $(src). However, the gdb scripts Makefile had a
hidden $(srctree)/$(src) that looked like this:
$(abspath $(srctree))/$(src)
Because we missed that then my installed kernel had symlinks that
looked like this:
__init__.py ->
${INSTALL_DIR}/$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Let's also replace the midden $(abspath $(srctree))/$(src) with
$(src). Now:
__init__.py ->
$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Fixes: b1992c3772 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The check for 'sym1 == sym2' is redundant here because it has already
been done a few lines above:
if (sym1 != sym2)
return NULL;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67be ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This has not been used since commit e911503085 ("Kconfig: Remove
bad inference rules expr_eliminate_dups2()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.10-rc1. Nothing major here, just lots of new drivers and updates
for apis and new hardware types. Included in here are:
- big IIO driver updates with more devices and drivers added
- fpga driver updates
- hyper-v driver updates
- uio_pruss driver removal, no one uses it, other drivers control the
same hardware now
- binder minor updates
- mhi driver updates
- excon driver updates
- counter driver updates
- accessability driver updates
- coresight driver updates
- other hwtracing driver updates
- nvmem driver updates
- slimbus driver updates
- spmi driver updates
- other smaller misc and char driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
misc: ntsync: mark driver as "broken" to prevent from building
spmi: pmic-arb: Add multi bus support
spmi: pmic-arb: Register controller for bus instead of arbiter
spmi: pmic-arb: Make core resources acquiring a version operation
spmi: pmic-arb: Make the APID init a version operation
spmi: pmic-arb: Fix some compile warnings about members not being described
dt-bindings: spmi: Deprecate qcom,bus-id
dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
spmi: hisi-spmi-controller: Do not override device identifier
dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
spmi: make spmi_bus_type const
extcon: adc-jack: Document missing struct members
extcon: realtek: Remove unused of_gpio.h
extcon: usbc-cros-ec: Convert to platform remove callback returning void
extcon: usb-gpio: Convert to platform remove callback returning void
extcon: max77843: Convert to platform remove callback returning void
extcon: max3355: Convert to platform remove callback returning void
extcon: intel-mrfld: Convert to platform remove callback returning void
...
