Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- bpf: fix crash due to out of bounds access into reg2btf_ids
- mvpp2: always set port pcs ops, avoid null-deref
- eth: marvell: fix driver load from initrd
- eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC"
Current release - new code bugs:
- mptcp: fix race in overlapping signal events
Previous releases - regressions:
- xen-netback: revert hotplug-status changes causing devices to not
be configured
- dsa:
- avoid call to __dev_set_promiscuity() while rtnl_mutex isn't
held
- fix panic when removing unoffloaded port from bridge
- dsa: microchip: fix bridging with more than two member ports
Previous releases - always broken:
- bpf:
- fix crash due to incorrect copy_map_value when both spin lock
and timer are present in a single value
- fix a bpf_timer initialization issue with clang
- do not try bpf_msg_push_data with len 0
- add schedule points in batch ops
- nf_tables:
- unregister flowtable hooks on netns exit
- correct flow offload action array size
- fix a couple of memory leaks
- vsock: don't check owner in vhost_vsock_stop() while releasing
- gso: do not skip outer ip header in case of ipip and net_failover
- smc: use a mutex for locking "struct smc_pnettable"
- openvswitch: fix setting ipv6 fields causing hw csum failure
- mptcp: fix race in incoming ADD_ADDR option processing
- sysfs: add check for netdevice being present to speed_show
- sched: act_ct: fix flow table lookup after ct clear or switching
zones
- eth: intel: fixes for SR-IOV forwarding offloads
- eth: broadcom: fixes for selftests and error recovery
- eth: mellanox: flow steering and SR-IOV forwarding fixes
Misc:
- make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor
friends not report freed skbs as drops
- force inlining of checksum functions in net/checksum.h"
* tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: mv643xx_eth: process retval from of_get_mac_address
ping: remove pr_err from ping_lookup
Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"
openvswitch: Fix setting ipv6 fields causing hw csum failure
ipv6: prevent a possible race condition with lifetimes
net/smc: Use a mutex for locking "struct smc_pnettable"
bnx2x: fix driver load from initrd
Revert "xen-netback: Check for hotplug-status existence before watching"
Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"
net/mlx5e: Fix VF min/max rate parameters interchange mistake
net/mlx5e: Add missing increment of count
net/mlx5e: MPLSoUDP decap, fix check for unsupported matches
net/mlx5e: Fix MPLSoUDP encap to use MPLS action information
net/mlx5e: Add feature check for set fec counters
net/mlx5e: TC, Skip redundant ct clear actions
net/mlx5e: TC, Reject rules with forward and drop actions
net/mlx5e: TC, Reject rules with drop and modify hdr action
net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets
net/mlx5e: Fix wrong return value on ioctl EEPROM query failure
net/mlx5: Fix possible deadlock on rule deletion
...
Pull cgroup fixes from Tejun Heo:
- Fix for a subtle bug in the recent release_agent permission check
update
- Fix for a long-standing race condition between cpuset and cpu hotplug
- Comment updates
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix kernel-doc
cgroup-v1: Correct privileges check in release_agent writes
cgroup: clarify cgroup_css_set_fork()
cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug
Fix the following W=1 kernel warnings:
kernel/cgroup/cpuset.c:3718: warning: expecting prototype for
cpuset_memory_pressure_bump(). Prototype was for
__cpuset_memory_pressure_bump() instead.
kernel/cgroup/cpuset.c:3568: warning: expecting prototype for
cpuset_node_allowed(). Prototype was for __cpuset_node_allowed()
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The idea is to check: a) the owning user_ns of cgroup_ns, b)
capabilities in init_user_ns.
The commit 24f6008564 ("cgroup-v1: Require capabilities to set
release_agent") got this wrong in the write handler of release_agent
since it checked user_ns of the opener (may be different from the owning
user_ns of cgroup_ns).
Secondly, to avoid possibly confused deputy, the capability of the
opener must be checked.
Fixes: 24f6008564 ("cgroup-v1: Require capabilities to set release_agent")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/stable/20220216121142.GB30035@blackbody.suse.cz/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Masami Ichikawa(CIP) <masami.ichikawa@cybertrust.co.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
With recent fixes for the permission checking when moving a task into a cgroup
using a file descriptor to a cgroup's cgroup.procs file and calling write() it
seems a good idea to clarify CLONE_INTO_CGROUP permission checking with a
comment.
Cc: Tejun Heo <tj@kernel.org>
Cc: <cgroups@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull locking fix from Borislav Petkov:
"Fix a NULL ptr dereference when dumping lockdep chains through
/proc/lockdep_chains"
* tag 'locking_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Correct lock_classes index mapping
Pull scheduler fix from Borislav Petkov:
"Fix task exposure order when forking tasks"
* tag 'sched_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix yet more sched_fork() races
Pull pidfd fix from Christian Brauner:
"This fixes a problem reported by lockdep when installing a pidfd via
fd_install() with siglock and the tasklisk write lock held in
copy_process() when calling clone()/clone3() with CLONE_PIDFD.
Originally a pidfd was created prior to holding any of these locks but
this required a call to ksys_close(). So quite some time ago in
6fd2fe494b ("copy_process(): don't use ksys_close() on cleanups") we
switched to a get_unused_fd_flags() + fd_install() model.
As part of that we moved fd_install() as late as possible. This was
done for two main reasons. First, because we needed to ensure that we
call fd_install() past the point of no return as once that's called
the fd is live in the task's file table. Second, because we tried to
ensure that the fd is visible in /proc/<pid>/fd/<pidfd> right when the
task is visible.
This fix moves the fd_install() to an even later point which means
that a task will be visible in proc while the pidfd isn't yet under
/proc/<pid>/fd/<pidfd>.
While this is a user visible change it's very unlikely that this will
have any impact. Nobody should be relying on that and if they do we
need to come up with something better but again, it's doubtful this is
relevant"
* tag 'pidfd.v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
copy_process(): Move fd_install() out of sighand->siglock critical section
Pull ucounts fixes from Eric Biederman:
"Michal Koutný recently found some bugs in the enforcement of
RLIMIT_NPROC in the recent ucount rlimit implementation.
In this set of patches I have developed a very conservative approach
changing only what is necessary to fix the bugs that I can see
clearly. Cleanups and anything that is making the code more consistent
can follow after we have the code working as it has historically.
The problem is not so much inconsistencies (although those exist) but
that it is very difficult to figure out what the code should be doing
in the case of RLIMIT_NPROC.
All other rlimits are only enforced where the resource is acquired
(allocated). RLIMIT_NPROC by necessity needs to be enforced in an
additional location, and our current implementation stumbled it's way
into that implementation"
* 'ucount-rlimit-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Handle wrapping in is_ucounts_overlimit
ucounts: Move RLIMIT_NPROC handling after set_user
ucounts: Base set_cred_ucounts changes on the real user
ucounts: Enforce RLIMIT_NPROC not RLIMIT_NPROC+1
rlimit: Fix RLIMIT_NPROC enforcement failure caused by capability calls in set_user
Alexei Starovoitov says:
====================
pull-request: bpf 2022-02-17
We've added 8 non-merge commits during the last 7 day(s) which contain
a total of 8 files changed, 119 insertions(+), 15 deletions(-).
The main changes are:
1) Add schedule points in map batch ops, from Eric.
2) Fix bpf_msg_push_data with len 0, from Felix.
3) Fix crash due to incorrect copy_map_value, from Kumar.
4) Fix crash due to out of bounds access into reg2btf_ids, from Kumar.
5) Fix a bpf_timer initialization issue with clang, from Yonghong.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add schedule points in batch ops
bpf: Fix crash due to out of bounds access into reg2btf_ids.
selftests: bpf: Check bpf_msg_push_data return value
bpf: Fix a bpf_timer initialization issue
bpf: Emit bpf_timer in vmlinux BTF
selftests/bpf: Add test for bpf_timer overwriting crash
bpf: Fix crash due to incorrect copy_map_value
bpf: Do not try bpf_msg_push_data with len 0
====================
Link: https://lore.kernel.org/r/20220217190000.37925-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes: aa2e93b8e5 ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220216155832.680775-4-ebiederm@xmission.com
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Michal Koutný <mkoutny@suse.com> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20220207121800.5079-4-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-3-ebiederm@xmission.com
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Michal Koutný <mkoutny@suse.com> wrote:
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 21d1c5e386 ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
Link: https://lkml.kernel.org/r/20220204181144.24462-1-mkoutny@suse.com
Link: https://lkml.kernel.org/r/20220216155832.680775-2-ebiederm@xmission.com
Cc: stable@vger.kernel.org
Reported-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Fixes: 21d1c5e386 ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Solar Designer <solar@openwall.com> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20210907213042.GA22626@openwall.com/
Link: https://lkml.kernel.org/r/20220212221412.GA29214@openwall.com
Link: https://lkml.kernel.org/r/20220216155832.680775-1-ebiederm@xmission.com
Fixes: 2863643fb8 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <solar@openwall.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes: b1ae6dc41e ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When commit e6ac2450d6 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes: c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
As previously discussed(https://lkml.org/lkml/2022/1/20/51),
cpuset_attach() is affected with similar cpu hotplug race,
as follow scenario:
cpuset_attach() cpu hotplug
--------------------------- ----------------------
down_write(cpuset_rwsem)
guarantee_online_cpus() // (load cpus_attach)
sched_cpu_deactivate
set_cpu_active()
// will change cpu_active_mask
set_cpus_allowed_ptr(cpus_attach)
__set_cpus_allowed_ptr_locked()
// (if the intersection of cpus_attach and
cpu_active_mask is empty, will return -EINVAL)
up_write(cpuset_rwsem)
To avoid races such as described above, protect cpuset_attach() call
with cpu_hotplug_lock.
Fixes: be367d0992 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time")
Cc: stable@vger.kernel.org # v2.6.32+
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull scheduler fix from Borislav Petkov:
"Fix a NULL-ptr dereference when recalculating a sched entity's weight"
* tag 'sched_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix fault in reweight_entity
Pull perf fix from Borislav Petkov:
"Prevent cgroup event list corruption when switching events"
* tag 'perf_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix list corruption in perf_cgroup_switch()
Pull seccomp fixes from Kees Cook:
"This fixes a corner case of fatal SIGSYS being ignored since v5.15.
Along with the signal fix is a change to seccomp so that seeing
another syscall after a fatal filter result will cause seccomp to kill
the process harder.
Summary:
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE
- Make seccomp self-destruct after fatal filter results
- Update seccomp samples for easier behavioral demonstration"
* tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples/seccomp: Adjust sample to also provide kill option
seccomp: Invalidate seccomp mode to catch death failures
signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE
A kernel exception was hit when trying to dump /proc/lockdep_chains after
lockdep report "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!":
Unable to handle kernel paging request at virtual address 00054005450e05c3
...
00054005450e05c3] address between user and kernel address ranges
...
pc : [0xffffffece769b3a8] string+0x50/0x10c
lr : [0xffffffece769ac88] vsnprintf+0x468/0x69c
...
Call trace:
string+0x50/0x10c
vsnprintf+0x468/0x69c
seq_printf+0x8c/0xd8
print_name+0x64/0xf4
lc_show+0xb8/0x128
seq_read_iter+0x3cc/0x5fc
proc_reg_read_iter+0xdc/0x1d4
The cause of the problem is the function lock_chain_get_class() will
shift lock_classes index by 1, but the index don't need to be shifted
anymore since commit 01bb6f0af9 ("locking/lockdep: Change the range
of class_idx in held_lock struct") already change the index to start
from 0.
The lock_classes[-1] located at chain_hlocks array. When printing
lock_classes[-1] after the chain_hlocks entries are modified, the
exception happened.
The output of lockdep_chains are incorrect due to this problem too.
Fixes: f611e8cf98 ("lockdep: Take read/write status in consideration when generate chainkey")
Signed-off-by: Cheng Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220210105011.21712-1-cheng-jui.wang@mediatek.com
Currently the following code in check_and_init_map_value()
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
can help generate bpf_timer definition in vmlinuxBTF.
But the code above may not zero the whole structure
due to anonymour members and that code will be replaced
by memset in the subsequent patch and
bpf_timer definition will disappear from vmlinuxBTF.
Let us emit the type explicitly so bpf program can continue
to use it from vmlinux.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194948.3141529-1-yhs@fb.com
