Commit Graph

27595 Commits

Author SHA1 Message Date
Thadeu Lima de Souza Cascardo
3c42e95420 selftests/powerpc/spectre_v2: Return skip code when miss_percent is high
A mis-match between reported and actual mitigation is not restricted to the
Vulnerable case. The guest might also report the mitigation as "Software
count cache flush" and the host will still mitigate with branch cache
disabled.

So, instead of skipping depending on the detected mitigation, simply skip
whenever the detected miss_percent is the expected one for a fully
mitigated system, that is, above 95%.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207130557.40566-1-cascardo@canonical.com
2021-12-09 22:41:21 +11:00
Linus Torvalds
8b98436af2 Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix the 'local_weight', 'weight' (memory access latency),
   'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc'
   (pipeline stage cycles) sort key sample aggregation.

 - Fix 'perf test' entry for watchpoints on s/390.

 - Fix branch_stack entry endianness check in the 'perf test' sample
   parsing test.

 - Fix ARM SPE handling on 'perf inject'.

 - Fix memory leaks detected with ASan.

 - Fix build on arm64 related to reallocarray() availability.

 - Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable
   (futex_waitv).

* tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf evsel: Fix memory leaks relating to unit
  perf report: Fix memory leaks around perf_tip()
  perf hist: Fix memory leak of a perf_hpp_fmt
  tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
  tools build: Fix removal of feature-sync-compare-and-swap feature detection
  perf inject: Fix ARM SPE handling
  perf bench: Fix two memory leaks detected with ASan
  perf test sample-parsing: Fix branch_stack entry endianness check
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf sort: Fix the 'p_stage_cyc' sort key behavior
  perf sort: Fix the 'ins_lat' sort key behavior
  perf sort: Fix the 'weight' sort key behavior
  perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
  perf tests wp: Remove unused functions on s390
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
2021-11-19 12:47:29 -08:00
Linus Torvalds
4479169824 Merge tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:

 - fix a coccicheck warning in gpio-virtio

 - fix gpio selftests build issues

 - fix a Kconfig issue in gpio-rockchip

* tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors
  selftests: gpio: restore CFLAGS options
  selftests: gpio: fix uninitialised variable warning
  selftests: gpio: fix gpio compiling error
  gpio: virtio: remove unneeded semicolon
2021-11-19 11:02:09 -08:00
Linus Torvalds
8d0112ac6f Merge tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, mac80211.

  Current release - regressions:

   - devlink: don't throw an error if flash notification sent before
     devlink visible

   - page_pool: Revert "page_pool: disable dma mapping support...",
     turns out there are active arches who need it

  Current release - new code bugs:

   - amt: cancel delayed_work synchronously in amt_fini()

  Previous releases - regressions:

   - xsk: fix crash on double free in buffer pool

   - bpf: fix inner map state pruning regression causing program
     rejections

   - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue,
     preventing mis-selecting the best effort queue

   - mac80211: do not access the IV when it was stripped

   - mac80211: fix radiotap header generation, off-by-one

   - nl80211: fix getting radio statistics in survey dump

   - e100: fix device suspend/resume

  Previous releases - always broken:

   - tcp: fix uninitialized access in skb frags array for Rx 0cp

   - bpf: fix toctou on read-only map's constant scalar tracking

   - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
     progs

   - tipc: only accept encrypted MSG_CRYPTO msgs

   - smc: transfer remaining wait queue entries during fallback, fix
     missing wake ups

   - udp: validate checksum in udp_read_sock() (when sockmap is used)

   - sched: act_mirred: drop dst for the direction from egress to
     ingress

   - virtio_net_hdr_to_skb: count transport header in UFO, prevent
     allowing bad skbs into the stack

   - nfc: reorder the logic in nfc_{un,}register_device, fix unregister

   - ipsec: check return value of ipv6_skip_exthdr

   - usb: r8152: add MAC passthrough support for more Lenovo Docks"

* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
  ptp: ocp: Fix a couple NULL vs IS_ERR() checks
  net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
  net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
  ipv6: check return value of ipv6_skip_exthdr
  e100: fix device suspend/resume
  devlink: Don't throw an error if flash notification sent before devlink visible
  page_pool: Revert "page_pool: disable dma mapping support..."
  ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
  octeontx2-af: debugfs: don't corrupt user memory
  NFC: add NCI_UNREG flag to eliminate the race
  NFC: reorder the logic in nfc_{un,}register_device
  NFC: reorganize the functions in nci_request
  tipc: check for null after calling kmemdup
  i40e: Fix display error code in dmesg
  i40e: Fix creation of first queue by omitting it if is not power of two
  i40e: Fix warning message and call stack during rmmod i40e driver
  i40e: Fix ping is lost after configuring ADq on VF
  i40e: Fix changing previously set num_queue_pairs for PFs
  i40e: Fix NULL ptr dereference on VSI filter sync
  i40e: Fix correct max_pkt_size on VF RX queue
  ...
2021-11-18 12:54:24 -08:00
Linus Torvalds
c46e8ece96 Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
 "Selftest changes:

   - Cleanups for the perf test infrastructure and mapping hugepages

   - Avoid contention on mmap_sem when the guests start to run

   - Add event channel upcall support to xen_shinfo_test

  x86 changes:

   - Fixes for Xen emulation

   - Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache

   - Fixes for migration of 32-bit nested guests on 64-bit hypervisor

   - Compilation fixes

   - More SEV cleanups

  Generic:

   - Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
     and num_online_cpus(). Most architectures were only using one of
     the two"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
  KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
  KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
  KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
  KVM: x86: Assume a 64-bit hypercall for guests with protected state
  selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
  riscv: kvm: fix non-kernel-doc comment block
  KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
  KVM: SEV: Drop a redundant setting of sev->asid during initialization
  KVM: SEV: WARN if SEV-ES is marked active but SEV is not
  KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
  KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
  KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
  KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
  KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
  KVM: x86/xen: Use sizeof_field() instead of open-coding it
  KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
  KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
  ...
2021-11-18 12:05:22 -08:00
Ian Rogers
b194c9cd09 perf evsel: Fix memory leaks relating to unit
unit may have a strdup pointer or be to a literal, consequently memory
assocciated with it isn't freed. Change it so the unit is always strdup
and so the memory can be safely freed.

Fix related issue in perf_event__process_event_update() for name and
own_cpus. Leaks were spotted by leak sanitizer.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118084749.2191447-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:19:14 -03:00
Ian Rogers
d9fc706108 perf report: Fix memory leaks around perf_tip()
perf_tip() may allocate memory or use a literal, this means memory
wasn't freed if allocated. Change the API so that literals aren't used.

At the same time add missing frees for system_path. These issues were
spotted using leak sanitizer.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118073804.2149974-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:18:03 -03:00
Ian Rogers
0ca1f534a7 perf hist: Fix memory leak of a perf_hpp_fmt
perf_hpp__column_unregister() removes an entry from a list but doesn't
free the memory causing a memory leak spotted by leak sanitizer.

Add the free while at the same time reducing the scope of the function
to static.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:16:56 -03:00
Arnaldo Carvalho de Melo
8b8dcc3720 tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
To pick the changes in these csets:

  b3ff2881ba ("MIPS: syscalls: Wire up futex_waitv syscall")

That add support for this new syscall in tools such as 'perf trace'.

For instance, this is now possible (adapted from the x86_64 test output):

  # perf trace -e futex_waitv
  ^C#
  # perf trace -v -e futex_waitv
  event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
  ^C#
  # perf trace -v -e futex* --max-events 10
  event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
  mmap size 528384B
           ? (         ): Timer/219310  ... [continued]: futex())                                            = -1 ETIMEDOUT (Connection timed out)
       0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
       0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.088 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
       0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1)     = 1
       0.088 ( 0.089 ms): Timer/219310  ... [continued]: futex())                                            = 0
       0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1)           = 0
       0.181 (         ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
  #

That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.

  $ grep futex_waitv tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl
  449	n64	futex_waitv			sys_futex_waitv
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
  diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl

Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Wang Haojun <jiangliuer01@gmail.com>
Link: https://lore.kernel.org/lkml/YZZRxuIyvSGLZhM4@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:15:27 -03:00
Arnaldo Carvalho de Melo
e8c04ea0fe tools build: Fix removal of feature-sync-compare-and-swap feature detection
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:

  $ cat /tmp/build/perf/feature/test-all.make.output
  In file included from test-all.c:18:
  test-libpython-version.c:5:10: error: #error
      5 |         #error
        |          ^~~~~
  test-all.c: In function ‘main’:
  test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
    203 |         main_test_sync_compare_and_swap(argc, argv);
        |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  $

Fix it, now to figure out what is that test-libpython-version.c
problem...

Fixes: 60fa754b2a ("tools: Remove feature-sync-compare-and-swap feature detection")
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
German Gomez
9e1a8d9f68 perf inject: Fix ARM SPE handling
'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:

  # ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1
  # ./perf inject -i perf.data -o perf.inject.data --itrace
  # ./perf report -i perf.inject.data --stdio

  0x42c00 [0x8]: failed to process type: 9 [Bad address]
  Error:
  failed to process sample

As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.

[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210412091006.468557-1-leo.yan@linaro.org/#24117339
[2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=133fe2e617e48ca0948983329f43877064ffda3e#n1196

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Sohaib Mohamed
92723ea0f1 perf bench: Fix two memory leaks detected with ASan
ASan reports memory leaks while running:

  $ perf bench sched all

Fixes: e27454cc63 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Russel <rusty@rustcorp.com.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Link: http://lore.kernel.org/lkml/20211110022012.16620-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Thomas Richter
cb5a63feae perf test sample-parsing: Fix branch_stack entry endianness check
Commit 10269a2ca2 ("perf test sample-parsing: Add endian test for
struct branch_flags") broke the test case 27 (Sample parsing) on s390 on
linux-next tree:

  # perf test -Fv 27
  27: Sample parsing
  --- start ---
  parsing failed for sample_type 0x800
  ---- end ----
  Sample parsing: FAILED!
  #

The cause of the failure is a wrong #define BS_EXPECTED_BE statement in
above commit.  Correct this define and the test case runs fine.

Output After:

  # perf test -Fv 27
  27: Sample parsing                                                  :
  --- start ---
  ---- end ----
  Sample parsing: Ok
  #

Fixes: 10269a2ca2 ("perf test sample-parsing: Add endian test for struct branch_flags")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/54077e81-503e-3405-6cb0-6541eb5532cc@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Arnaldo Carvalho de Melo
162b944598 tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:

  828ca89628 ("KVM: x86: Expose TSC offset controls to userspace")

That just rebuilds kvm-stat.c on x86, no change in functionality.

This silences these perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h

Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Namhyung Kim
db4b284029 perf sort: Fix the 'p_stage_cyc' sort key behavior
andle 'p_stage_cyc' (for pipeline stage cycles) sort key with the same
rationale as for the 'weight' and 'local_weight', see the fix in this
series for a full explanation.

Not sure it also needs the local and global variants.

But I couldn't test it actually because I don't have the machine.

Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Namhyung Kim
4d03c75363 perf sort: Fix the 'ins_lat' sort key behavior
Handle 'ins_lat' (for instruction latency) and 'local_ins_lat' sort keys
with the same rationale as for the 'weight' and 'local_weight', see the
previous fix in this series for a full explanation.

But I couldn't test it actually, so only build tested.

Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Namhyung Kim
784e8adda4 perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses.  And perf tool has 'weight'
and 'local_weight' sort keys to display the info.

But it's somewhat confusing what it shows exactly.  In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.

For example:

  $ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M

  $ perf report --stdio -n -s +local_weight
  ...
  #
  # Overhead  Samples  Command  Shared Object     Symbol                     Local Weight
  # ........  .......  .......  ................  .........................  ............
  #
      21.23%      313  dd       [kernel.vmlinux]  [k] lockref_get_not_zero   32
      12.43%      183  dd       [kernel.vmlinux]  [k] lockref_get_not_zero   35
      11.97%      159  dd       [kernel.vmlinux]  [k] lockref_get_not_zero   36
      10.40%      141  dd       [kernel.vmlinux]  [k] lockref_put_return     32
       7.63%      113  dd       [kernel.vmlinux]  [k] lockref_get_not_zero   33
       6.37%       92  dd       [kernel.vmlinux]  [k] lockref_get_not_zero   34
       6.15%       90  dd       [kernel.vmlinux]  [k] lockref_put_return     33
  ...

So let's look at the 'lockref_get_not_zero' symbols.  The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016.  But it's not the case:

  $ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
  ...
  #
  # Overhead  Samples  Command  Shared Object     Local Weight  Weight
  # ........  .......  .......  ................  ............  ......
  #
       1.36%        4  dd       [kernel.vmlinux]  36            144
       0.47%        4  dd       [kernel.vmlinux]  37            148
       0.42%        4  dd       [kernel.vmlinux]  32            128
       0.40%        4  dd       [kernel.vmlinux]  34            136
       0.35%        4  dd       [kernel.vmlinux]  36            144
       0.34%        4  dd       [kernel.vmlinux]  35            140
       0.30%        4  dd       [kernel.vmlinux]  36            144
       0.30%        4  dd       [kernel.vmlinux]  34            136
       0.30%        4  dd       [kernel.vmlinux]  32            128
       0.30%        4  dd       [kernel.vmlinux]  32            128
  ...

With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight').  I don't think this is
what we want.

I found this because of the way it aggregates the 'weight' value.  Since
it's not a period, we should not add them in the he->stat.  Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.

After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.

Let's keep the weight and display it differently.  For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.

With this change, I can see the expected numbers.

  $ perf report --stdio -n -s +local_weight,weight -S lockref_get_not_zero
  ...
  #
  # Overhead  Samples  Command  Shared Object     Local Weight  Weight
  # ........  .......  .......  ................  ............  .....
  #
      21.23%      313  dd       [kernel.vmlinux]  32            10016
      12.43%      183  dd       [kernel.vmlinux]  35            6405
      11.97%      159  dd       [kernel.vmlinux]  36            5724
       7.63%      113  dd       [kernel.vmlinux]  33            3729
       6.37%       92  dd       [kernel.vmlinux]  34            3128
       4.17%       59  dd       [kernel.vmlinux]  37            2183
       0.08%        1  dd       [kernel.vmlinux]  269           269
       0.08%        1  dd       [kernel.vmlinux]  38            38

Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211105225617.151364-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Arnaldo Carvalho de Melo
70f9c9b2df perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
As it is being used in tools/perf/arch/arm64/util/arm-spe.c and the
COMPAT_NEED_REALLOCARRAY was only being set when CORESIGHT=1 is set.

Fixes: 56c31cdff7 ("perf arm-spe: Implement find_snapshot callback")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/all/YZT63mIc7iY01er3@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Arnaldo Carvalho de Melo
ccb05590c4 perf tests wp: Remove unused functions on s390
Fixing these build problems:

  tests/wp.c:24:12: error: 'wp_read' defined but not used [-Werror=unused-function]
   static int wp_read(int fd, long long *count, int size)
              ^
  tests/wp.c:35:13: error: 'get__perf_event_attr' defined but not used [-Werror=unused-function]
   static void get__perf_event_attr(struct perf_event_attr *attr, int wp_type,
               ^
    CC      /tmp/build/perf/util/print_binary.o

Fixes: e47c6ecaae ("perf test: Convert watch point tests to test cases.")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Arnaldo Carvalho de Melo
346e91998c tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:

  b56639318b ("KVM: SEV: Add support for SEV intra host migration")
  e615e35589 ("KVM: x86: On emulation failure, convey the exit reason, etc. to userspace")
  a9d496d8e0 ("KVM: x86: Clarify the kvm_run.emulation_failure structure layout")
  c68dc1b577 ("KVM: x86: Report host tsc and realtime values in KVM_GET_CLOCK")
  dea8ee31a0 ("RISC-V: KVM: Add SBI v0.1 support")

That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.

This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: David Edmondson <david.edmondson@oracle.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:07 -03:00
Arnaldo Carvalho de Melo
b075c1d81e tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:

  eec2113eab ("x86/fpu/amx: Define AMX state components and have it used for boot-time checks")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-11-18 10:08:06 -03:00
Arnaldo Carvalho de Melo
b768f60bd9 selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
$ git status
  nothing to commit, working tree clean
  $
  $ make -C tools/testing/selftests/kvm/ > /dev/null 2>&1
  $ git status

  Untracked files:
    (use "git add <file>..." to include in what will be committed)
  	tools/testing/selftests/kvm/x86_64/sev_migrate_tests

  nothing added to commit but untracked files present (use "git add" to track)
  $

Fixes: 6a58150859 ("selftest: KVM: Add intra host migration tests")
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Orr <marcorr@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Message-Id: <YZPIPfvYgRDCZi/w@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-18 02:12:13 -05:00
Davide Caratti
1d127effdc selftests: add a test case for mirred egress to ingress
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.

Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16 19:17:38 -08:00
Jakub Kicinski
f083ec3160 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2021-11-16

We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).

The main changes are:

1) Fix pruning regression where verifier went overly conservative rejecting
   previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.

2) Fix verifier TOCTOU bug when using read-only map's values as constant
   scalars during verification, from Daniel Borkmann.

3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.

4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.

5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
   programs due to deadlock possibilities, from Dmitrii Banshchikov.

6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.

7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.

8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  udp: Validate checksum in udp_read_sock()
  bpf: Fix toctou on read-only map's constant scalar tracking
  samples/bpf: Fix build error due to -isystem removal
  selftests/bpf: Add tests for restricted helpers
  bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
  libbpf: Perform map fd cleanup for gen_loader in case of error
  samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
  tools/runqslower: Fix cross-build
  samples/bpf: Fix summary per-sec stats in xdp_sample_user
  selftests/bpf: Check map in map pruning
  bpf: Fix inner map state pruning regression.
  xsk: Fix crash on double free in buffer pool
====================

Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-16 16:53:48 -08:00
Paolo Bonzini
e5bc4d4602 Merge branch 'kvm-selftest' into kvm-master
- Cleanups for the perf test infrastructure and mapping hugepages

- Avoid contention on mmap_sem when the guests start to run

- Add event channel upcall support to xen_shinfo_test
2021-11-16 13:21:13 -05:00