Pull staging and IIO updates from Greg KH:
"Here is the big staging/iio driver patches for 5.6-rc1
Included in here are:
- lots of new IIO drivers and updates for that subsystem
- the usual huge quantity of minor cleanups for staging drivers
- removal of the following staging drivers:
- isdn/avm
- isdn/gigaset
- isdn/hysdn
- octeon-usb
- octeon ethernet
Overall we deleted far more lines than we added, removing over 40k of
old and obsolete driver code.
All of these changes have been in linux-next for a while with no
reported issues"
* tag 'staging-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (353 commits)
staging: most: usb: check for NULL device
staging: next: configfs: fix release link
staging: most: core: fix logging messages
staging: most: core: remove container struct
staging: most: remove struct device core driver
staging: most: core: drop device reference
staging: most: remove device from interface structure
staging: comedi: drivers: fix spelling mistake "to" -> "too"
staging: exfat: remove fs_func struct.
staging: wilc1000: avoid mutex unlock without lock in wilc_wlan_handle_txq()
staging: wilc1000: return zero on success and non-zero on function failure
staging: axis-fifo: replace spinlock with mutex
staging: wilc1000: remove unused code prior to throughput enhancement in SPI
staging: wilc1000: added 'wilc_' prefix for 'struct assoc_resp' name
staging: wilc1000: move firmware API struct's to separate header file
staging: wilc1000: remove use of infinite loop conditions
staging: kpc2000: rename variables with kpc namespace
staging: vt6656: Remove memory buffer from vnt_download_firmware.
staging: vt6656: Just check NEWRSR_DECRYPTOK for RX_FLAG_DECRYPTED.
staging: vt6656: Use vnt_rx_tail struct for tail variables.
...
For personalities previously registered via IORING_REGISTER_PERSONALITY,
allow any command to select them. This is done through setting
sqe->personality to the id returned from registration, and then flagging
sqe->flags with IOSQE_PERSONALITY.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If an application wants to use a ring with different kinds of
credentials, it can register them upfront. We don't lookup credentials,
the credentials of the task calling IORING_REGISTER_PERSONALITY is used.
An 'id' is returned for the application to use in subsequent personality
support.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_SETUP_ATTACH_WQ is set, it expects wq_fd in io_uring_params to
be a valid io_uring fd io-wq of which will be shared with the newly
created io_uring instance. If the flag is set but it can't share io-wq,
it fails.
This allows creation of "sibling" io_urings, where we prefer to keep the
SQ/CQ private, but want to share the async backend to minimize the amount
of overhead associated with having multiple rings that belong to the same
backend.
Reported-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Daurnimator <quae@daurnimator.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently setup the io_wq with a static set of mm and creds. Even for
a single-use io-wq per io_uring, this is suboptimal as we have may have
multiple enters of the ring. For sharing the io-wq backend, it doesn't
work at all.
Switch to passing in the creds and mm when the work item is setup. This
means that async work is no longer deferred to the io_uring mm and creds,
it is done with the current mm and creds.
Flag this behavior with IORING_FEAT_CUR_PERSONALITY, so applications know
they can rely on the current personality (mm and creds) being the same
for direct issue and async issue.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull sound updates from Takashi Iwai:
"As the diffstat shows we've had again a lot of works done for this
cycle: the majority of changes are the continued componentization and
code refactoring in ASoC, the tree-wide PCM API updates and cleanups
and SOF updates while a few ASoC driver updates are seen, too.
Here we go, some highlights:
Core:
- Finally y2038 support landed to ALSA ABI; some ioctls have been
extended and lots of tricks were applied
- Applying the new managed PCM buffer API to all drivers; the API
itself was already merged in 5.5
- The already deprecated dimension support in ALSA control API is
dropped completely now
- Verification of ALSA control elements to catch API misuses
ASoC:
- Further code refactorings and moving things to the component level
- Lots of updates and improvements on SOF / Intel drivers; now
including common HDMI driver and SoundWire support
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011,
RT1015 and RT1308
HD-audio:
- Improved ring-buffer communications using waitqueue
- Drop the superfluous buffer preallocation on x86
Others:
- Many code cleanups, mostly constifications over the whole tree
- USB-audio: quirks for MOTU, Corsair Virtuoso, Line6 Helix
- FireWire: code refactoring for oxfw and dice drivers"
* tag 'sound-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (638 commits)
ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
ALSA: hda: Add Clevo W65_67SB the power_save blacklist
ASoC: soc-core: remove null_snd_soc_ops
ASoC: soc-pcm: add soc_rtd_trigger()
ASoC: soc-pcm: add soc_rtd_hw_free()
ASoC: soc-pcm: add soc_rtd_hw_params()
ASoC: soc-pcm: add soc_rtd_prepare()
ASoC: soc-pcm: add soc_rtd_shutdown()
ASoC: soc-pcm: add soc_rtd_startup()
ASoC: rt1015: add rt1015 amplifier driver
ASoC: madera: Correct some kernel doc
ASoC: topology: fix soc_tplg_fe_link_create() - link->dobj initialization order
ASoC: Intel: skl_hda_dsp_common: Fix global-out-of-bounds bug
ASoC: madera: Correct DMIC only input hook ups
ALSA: cs46xx: fix spelling mistake "to" -> "too"
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
ASoC: Add MediaTek MT6660 Speaker Amp Driver
ASoC: dt-bindings: rt5645: add suppliers
ASoC: max98090: fix deadlock in max98090_dapm_put_enum_double()
ASoC: dapm: add snd_soc_dapm_put_enum_double_locked
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull crypto updates from Herbert Xu:
"API:
- Removed CRYPTO_TFM_RES flags
- Extended spawn grabbing to all algorithm types
- Moved hash descsize verification into API code
Algorithms:
- Fixed recursive pcrypt dead-lock
- Added new 32 and 64-bit generic versions of poly1305
- Added cryptogams implementation of x86/poly1305
Drivers:
- Added support for i.MX8M Mini in caam
- Added support for i.MX8M Nano in caam
- Added support for i.MX8M Plus in caam
- Added support for A33 variant of SS in sun4i-ss
- Added TEE support for Raven Ridge in ccp
- Added in-kernel API to submit TEE commands in ccp
- Added AMD-TEE driver
- Added support for BCM2711 in iproc-rng200
- Added support for AES256-GCM based ciphers for chtls
- Added aead support on SEC2 in hisilicon"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (244 commits)
crypto: arm/chacha - fix build failured when kernel mode NEON is disabled
crypto: caam - add support for i.MX8M Plus
crypto: x86/poly1305 - emit does base conversion itself
crypto: hisilicon - fix spelling mistake "disgest" -> "digest"
crypto: chacha20poly1305 - add back missing test vectors and test chunking
crypto: x86/poly1305 - fix .gitignore typo
tee: fix memory allocation failure checks on drv_data and amdtee
crypto: ccree - erase unneeded inline funcs
crypto: ccree - make cc_pm_put_suspend() void
crypto: ccree - split overloaded usage of irq field
crypto: ccree - fix PM race condition
crypto: ccree - fix FDE descriptor sequence
crypto: ccree - cc_do_send_request() is void func
crypto: ccree - fix pm wrongful error reporting
crypto: ccree - turn errors to debug msgs
crypto: ccree - fix AEAD decrypt auth fail
crypto: ccree - fix typo in comment
crypto: ccree - fix typos in error msgs
crypto: atmel-{aes,sha,tdes} - Retire crypto_platform_data
crypto: x86/sha - Eliminate casts on asm implementations
...
Pull fscrypt updates from Eric Biggers:
- Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
provided via a keyring key.
- Prepare for the new dirhash method (SipHash of plaintext name) that
will be used by directories that are both encrypted and casefolded.
- Switch to a new format for "no-key names" that prepares for the new
dirhash method, and also fixes a longstanding bug where multiple
filenames could map to the same no-key name.
- Allow the crypto algorithms used by fscrypt to be built as loadable
modules when the fscrypt-capable filesystems are.
- Optimize fscrypt_zeroout_range().
- Various cleanups.
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: (26 commits)
fscrypt: improve format of no-key names
ubifs: allow both hash and disk name to be provided in no-key names
ubifs: don't trigger assertion on invalid no-key filename
fscrypt: clarify what is meant by a per-file key
fscrypt: derive dirhash key for casefolded directories
fscrypt: don't allow v1 policies with casefolding
fscrypt: add "fscrypt_" prefix to fname_encrypt()
fscrypt: don't print name of busy file when removing key
ubifs: use IS_ENCRYPTED() instead of ubifs_crypt_is_encrypted()
fscrypt: document gfp_flags for bounce page allocation
fscrypt: optimize fscrypt_zeroout_range()
fscrypt: remove redundant bi_status check
fscrypt: Allow modular crypto algorithms
fscrypt: include <linux/ioctl.h> in UAPI header
fscrypt: don't check for ENOKEY from fscrypt_get_encryption_info()
fscrypt: remove fscrypt_is_direct_key_policy()
fscrypt: move fscrypt_valid_enc_modes() to policy.c
fscrypt: check for appropriate use of DIRECT_KEY flag earlier
fscrypt: split up fscrypt_supported_policy() by policy version
fscrypt: introduce fscrypt_needs_contents_encryption()
...
There are several storage drivers like dm-multipath, iscsi, tcmu-runner,
amd nbd that have userspace components that can run in the IO path. For
example, iscsi and nbd's userspace deamons may need to recreate a socket
and/or send IO on it, and dm-multipath's daemon multipathd may need to
send SG IO or read/write IO to figure out the state of paths and re-set
them up.
In the kernel these drivers have access to GFP_NOIO/GFP_NOFS and the
memalloc_*_save/restore functions to control the allocation behavior,
but for userspace we would end up hitting an allocation that ended up
writing data back to the same device we are trying to allocate for.
The device is then in a state of deadlock, because to execute IO the
device needs to allocate memory, but to allocate memory the memory
layers want execute IO to the device.
Here is an example with nbd using a local userspace daemon that performs
network IO to a remote server. We are using XFS on top of the nbd device,
but it can happen with any FS or other modules layered on top of the nbd
device that can write out data to free memory. Here a nbd daemon helper
thread, msgr-worker-1, is performing a write/sendmsg on a socket to execute
a request. This kicks off a reclaim operation which results in a WRITE to
the nbd device and the nbd thread calling back into the mm layer.
[ 1626.609191] msgr-worker-1 D 0 1026 1 0x00004000
[ 1626.609193] Call Trace:
[ 1626.609195] ? __schedule+0x29b/0x630
[ 1626.609197] ? wait_for_completion+0xe0/0x170
[ 1626.609198] schedule+0x30/0xb0
[ 1626.609200] schedule_timeout+0x1f6/0x2f0
[ 1626.609202] ? blk_finish_plug+0x21/0x2e
[ 1626.609204] ? _xfs_buf_ioapply+0x2e6/0x410
[ 1626.609206] ? wait_for_completion+0xe0/0x170
[ 1626.609208] wait_for_completion+0x108/0x170
[ 1626.609210] ? wake_up_q+0x70/0x70
[ 1626.609212] ? __xfs_buf_submit+0x12e/0x250
[ 1626.609214] ? xfs_bwrite+0x25/0x60
[ 1626.609215] xfs_buf_iowait+0x22/0xf0
[ 1626.609218] __xfs_buf_submit+0x12e/0x250
[ 1626.609220] xfs_bwrite+0x25/0x60
[ 1626.609222] xfs_reclaim_inode+0x2e8/0x310
[ 1626.609224] xfs_reclaim_inodes_ag+0x1b6/0x300
[ 1626.609227] xfs_reclaim_inodes_nr+0x31/0x40
[ 1626.609228] super_cache_scan+0x152/0x1a0
[ 1626.609231] do_shrink_slab+0x12c/0x2d0
[ 1626.609233] shrink_slab+0x9c/0x2a0
[ 1626.609235] shrink_node+0xd7/0x470
[ 1626.609237] do_try_to_free_pages+0xbf/0x380
[ 1626.609240] try_to_free_pages+0xd9/0x1f0
[ 1626.609245] __alloc_pages_slowpath+0x3a4/0xd30
[ 1626.609251] ? ___slab_alloc+0x238/0x560
[ 1626.609254] __alloc_pages_nodemask+0x30c/0x350
[ 1626.609259] skb_page_frag_refill+0x97/0xd0
[ 1626.609274] sk_page_frag_refill+0x1d/0x80
[ 1626.609279] tcp_sendmsg_locked+0x2bb/0xdd0
[ 1626.609304] tcp_sendmsg+0x27/0x40
[ 1626.609307] sock_sendmsg+0x54/0x60
[ 1626.609308] ___sys_sendmsg+0x29f/0x320
[ 1626.609313] ? sock_poll+0x66/0xb0
[ 1626.609318] ? ep_item_poll.isra.15+0x40/0xc0
[ 1626.609320] ? ep_send_events_proc+0xe6/0x230
[ 1626.609322] ? hrtimer_try_to_cancel+0x54/0xf0
[ 1626.609324] ? ep_read_events_proc+0xc0/0xc0
[ 1626.609326] ? _raw_write_unlock_irq+0xa/0x20
[ 1626.609327] ? ep_scan_ready_list.constprop.19+0x218/0x230
[ 1626.609329] ? __hrtimer_init+0xb0/0xb0
[ 1626.609331] ? _raw_spin_unlock_irq+0xa/0x20
[ 1626.609334] ? ep_poll+0x26c/0x4a0
[ 1626.609337] ? tcp_tsq_write.part.54+0xa0/0xa0
[ 1626.609339] ? release_sock+0x43/0x90
[ 1626.609341] ? _raw_spin_unlock_bh+0xa/0x20
[ 1626.609342] __sys_sendmsg+0x47/0x80
[ 1626.609347] do_syscall_64+0x5f/0x1c0
[ 1626.609349] ? prepare_exit_to_usermode+0x75/0xa0
[ 1626.609351] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch adds a new prctl command that daemons can use after they have
done their initial setup, and before they start to do allocations that
are in the IO path. It sets the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE
flags so both userspace block and FS threads can use it to avoid the
allocation recursion and try to prevent from being throttled while
writing out data to free up memory.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Masato Suzuki <masato.suzuki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20191112001900.9206-1-mchristi@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
Pull block driver updates from Jens Axboe:
"Like the core side, not a lot of changes here, just two main items:
- Series of patches (via Coly) with fixes for bcache (Coly,
Christoph)
- MD pull request from Song"
* tag 'for-5.6/drivers-2020-01-27' of git://git.kernel.dk/linux-block: (31 commits)
bcache: reap from tail of c->btree_cache in bch_mca_scan()
bcache: reap c->btree_cache_freeable from the tail in bch_mca_scan()
bcache: remove member accessed from struct btree
bcache: print written and keys in trace_bcache_btree_write
bcache: avoid unnecessary btree nodes flushing in btree_flush_write()
bcache: add code comments for state->pool in __btree_sort()
lib: crc64: include <linux/crc64.h> for 'crc64_be'
bcache: use read_cache_page_gfp to read the superblock
bcache: store a pointer to the on-disk sb in the cache and cached_dev structures
bcache: return a pointer to the on-disk sb from read_super
bcache: transfer the sb_page reference to register_{bdev,cache}
bcache: fix use-after-free in register_bcache()
bcache: properly initialize 'path' and 'err' in register_bcache()
bcache: rework error unwinding in register_bcache
bcache: use a separate data structure for the on-disk super block
bcache: cached_dev_free needs to put the sb page
md/raid1: introduce wait_for_serialization
md/raid1: use bucket based mechanism for IO serialization
md: introduce a new struct for IO serialization
md: don't destroy serial_info_pool if serialize_policy is true
...
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
Pull HID updates from Jiri Kosina:
"This time it's surprisingly quiet (probably due to the christmas
break):
- Logitech HID++ protocol improvements from Mazin Rezk, Pedro
Vanzella and Adrian Freund
- support for hidraw uniq ioctl from Marcel Holtmann"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
hid-logitech-hidpp: read battery voltage from newer devices
HID: logitech: Add MX Master 3 Mouse
HID: logitech-hidpp: Support WirelessDeviceStatus connect events
HID: logitech-hidpp: Support translations from short to long reports
HID: hidraw: add support uniq ioctl
Pull arm64 updates from Will Deacon:
"The changes are a real mixed bag this time around.
The only scary looking one from the diffstat is the uapi change to
asm-generic/mman-common.h, but this has been acked by Arnd and is
actually just adding a pair of comments in an attempt to prevent
allocation of some PROT values which tend to get used for
arch-specific purposes. We'll be using them for Branch Target
Identification (a CFI-like hardening feature), which is currently
under review on the mailing list.
New architecture features:
- Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
- Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure
hardware random number generator. As well as exposing these to
userspace, we also use them as part of the KASLR seed and to seed
the crng once all CPUs have come online.
- Advertise a bunch of new instructions to userspace, including
support for Data Gathering Hint, Matrix Multiply and 16-bit
floating point.
Kexec:
- Cleanups in preparation for relocating with the MMU enabled
- Support for loading crash dump kernels with kexec_file_load()
Perf and PMU drivers:
- Cleanups and non-critical fixes for a couple of system PMU drivers
FPU-less (aka broken) CPU support:
- Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck
finding a 64-bit userspace that handles this.
Modern assembly function annotations:
- Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
to aid debuggers
Kbuild:
- Cleanup detection of LSE support in the assembler by introducing
'as-instr'
- Remove compressed Image files when building clean targets
IP checksumming:
- Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
Hardware errata:
- Work around Cortex-A55 erratum #1530923
Shadow call stack:
- Work around some issues with Clang's integrated assembler not
liking our perfectly reasonable assembly code
- Avoid allocating the X18 register, so that it can be used to hold
the shadow call stack pointer in future
ACPI:
- Fix ID count checking in IORT code. This may regress broken
firmware that happened to work with the old implementation, in
which case we'll have to revert it and try something else
- Fix DAIF corruption on return from GHES handler with pseudo-NMIs
Miscellaneous:
- Whitelist some CPUs that are unaffected by Spectre-v2
- Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
- Reserve a couple of arch-specific PROT flags that are already used
by Sparc and PowerPC and are planned for later use with BTI on
arm64
- Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: acpi: fix DAIF manipulation with pNMI
arm64: kconfig: Fix alignment of E0PD help text
arm64: Use v8.5-RNG entropy for KASLR seed
arm64: Implement archrandom.h for ARMv8.5-RNG
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
arm64: entry: Avoid empty alternatives entries
arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
arm64: csum: Fix pathological zero-length calls
arm64: entry: cleanup sp_el0 manipulation
arm64: entry: cleanup el0 svc handler naming
arm64: entry: mark all entry code as notrace
arm64: assembler: remove smp_dmb macro
arm64: assembler: remove inherit_daif macro
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
arm64: Use macros instead of hard-coded constants for MAIR_EL1
arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
arm64: kernel: avoid x18 in __cpu_soft_restart
arm64: kvm: stop treating register x18 as caller save
arm64/lib: copy_page: avoid x18 register in assembler code
...
ASoC: Updates for v5.6
A pretty big release this time around, a lot of new drivers and both
Morimoto-san and Takashi were doing subsystem wide updates as well:
- Further big refactorings from Morimoto-san simplifying the core
interfaces and moving things to the component level.
- Transition of drivers to managed buffer allocation and removal of
redundant PCM ioctls.
- New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
and RT1308.
Send ETHTOOL_MSG_WOL_NTF notification whenever wake-on-lan settings of
a device are modified using ETHTOOL_MSG_WOL_SET netlink message or
ETHTOOL_SWOL ioctl request.
As notifications can be received by anyone, do not include SecureOn(tm)
password in notification messages.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement WOL_SET netlink request to set wake-on-lan settings. This is
equivalent to ETHTOOL_SWOL ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement WOL_GET request to get wake-on-lan settings for a device,
traditionally available via ETHTOOL_GWOL ioctl request.
As part of the implementation, provide symbolic names for wake-on-line
modes as ETH_SS_WOL_MODES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send ETHTOOL_MSG_DEBUG_NTF notification message whenever debugging message
mask for a device are modified using ETHTOOL_MSG_DEBUG_SET netlink message
or ETHTOOL_SMSGLVL ioctl request.
The notification message has the same format as reply to DEBUG_GET request.
As with other ethtool notifications, netlink requests only trigger the
notification if the mask is actually changed while ioctl request trigger it
whenever the request results in calling the ethtool_ops handler.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement DEBUG_SET netlink request to set debugging settings for a device.
At the moment, only message mask corresponding to message level as set by
ETHTOOL_SMSGLVL ioctl request can be set. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement DEBUG_GET request to get debugging settings for a device. At the
moment, only message mask corresponding to message level as reported by
ETHTOOL_GMSGLVL ioctl request is provided. (It is called message level in
ioctl interface but almost all drivers interpret it as a bit mask.)
As part of the implementation, provide symbolic names for message mask bits
as ETH_SS_MSG_CLASSES string set.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new nested netlink attribute, NFTA_SET_DESC_CONCAT, used
to specify the length of each field in a set concatenation.
This allows set implementations to support concatenation of multiple
ranged items, as they can divide the input key into matching data for
every single field. Such set implementations would be selected as
they specify support for NFT_SET_INTERVAL and allow desc->field_count
to be greater than one. Explicitly disallow this for nft_set_rbtree.
In order to specify the interval for a set entry, userspace would
include in NFTA_SET_DESC_CONCAT attributes field lengths, and pass
range endpoints as two separate keys, represented by attributes
NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_KEY_END.
While at it, export the number of 32-bit registers available for
packet matching, as nftables will need this to know the maximum
number of field lengths that can be specified.
For example, "packets with an IPv4 address between 192.0.2.0 and
192.0.2.42, with destination port between 22 and 25", can be
expressed as two concatenated elements:
NFTA_SET_ELEM_KEY: 192.0.2.0 . 22
NFTA_SET_ELEM_KEY_END: 192.0.2.42 . 25
and NFTA_SET_DESC_CONCAT attribute would contain:
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 4
NFTA_LIST_ELEM
NFTA_SET_FIELD_LEN: 2
v4: No changes
v3: Complete rework, NFTA_SET_DESC_CONCAT instead of NFTA_SET_SUBKEY
v2: No changes
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add NFTA_SET_ELEM_KEY_END attribute to convey the closing element of the
interval between kernel and userspace.
This patch also adds the NFT_SET_EXT_KEY_END extension to store the
closing element value in this interval.
v4: No changes
v3: New patch
[sbrivio: refactor error paths and labels; add corresponding
nft_set_ext_type for new key; rebase]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
